STUD,CONTINUOUS THD
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QNC04
NAICS
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Classification Code
5307
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation (N0010426QNC04) for the procurement of a specialized fastener component, specifically a "STUD, CONTINUOUS THD." This procurement is classified under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5307, indicating a focus on high-precision, critical fastener hardware for defense applications.
**Purpose and Scope**
The primary objective of this solicitation is to acquire studs that will be used in crucial shipboard systems. The nature of the application is such that the use of incorrect or defective material could result in catastrophic failure, including serious personnel injury, loss of life, or loss of vital shipboard systems. As a result, the material is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and traceability procedures to ensure the highest level of quality and reliability.
**Key Requirements and Deliverables**
Contractors are required to manufacture and deliver studs conforming to MIL-DTL-1222, with specific attributes as follows:
- Material: K-MONEL, Grade 500 (QQ-N-286), solution annealed and age hardened
- Size: 1 1/8 inches in diameter, 6 1/4 inches in length
- Thread Series: 7 UNC, Class 3A, chamfered end configuration
- Threads: Cut or ground threads are permitted
- Marking: As specified in MIL-DTL-1222, with permanent traceability marking per MIL-STD-792
- Testing: Includes liquid penetrant inspection, ultrasonic inspection (for certain sizes), mechanical property testing (tensile, yield, elongation, hardness), and slow strain rate tensile testing at approved laboratories
- Certifications: Full traceability and certification of chemical, mechanical, and non-destructive test results are required. Certifications must be positive, unqualified, and directly traceable to each item.
- Packaging: Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements.
Contractors must provide one additional fastener per heat/lot for traceability and testing purposes. All certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before formal acceptance.
**Quality Assurance and Compliance**
The contract mandates a robust quality system in accordance with ISO 9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO 10012 or ANSI-Z540.3/ISO-17025. Government Quality Assurance (GQA) at source is required, and the contractor’s quality system and facilities are subject to audit and inspection by government representatives. Subcontractor quality assurance and traceability controls are also strictly enforced.
All waivers, deviations, and engineering changes must be submitted for government approval, with detailed documentation and impact analysis. The contract prohibits the use of mercury or mercury-containing compounds and requires that all materials be free from such contamination.
**Contracting Entity and Contact Information**
- Contracting Entity: NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH)
- Department: Department of Defense, Department of the Navy
- Primary Contact: April N. Schlussser, Telephone: 771-229-0555, Email: [email protected]
**Procurement Type and Special Considerations**
This is a formal solicitation (active as of March 25, 2026) and is a total small business set-aside, in accordance with applicable federal regulations. The procurement is certified for national defense under the Defense Priorities and Allocations System (DPAS), with a DO rating, and is being conducted under Emergency Acquisition Flexibilities (EAF). The resultant award will be bilateral, requiring written contractor acceptance.
Contractors must comply with all applicable federal, military, and commercial specifications and standards as referenced in the solicitation. Past performance will be considered in the evaluation of offers.
**Constant Elements Over Contract Lifecycle**
- Strict adherence to technical specifications and quality assurance requirements
- Full traceability and certification for all materials and processes
- Government source inspection and acceptance prior to shipment
- Maintenance of configuration control and prompt reporting of any nonconformances
- Compliance with all packaging, marking, and documentation requirements
- Ongoing communication and submission of required data via WAWF and designated Navy contacts
**Summary**
This opportunity is suited for small businesses with demonstrated expertise in manufacturing high-reliability, specialty fasteners for defense and shipboard applications, and with robust quality management systems capable of meeting stringent Navy requirements. Interested contractors should carefully review the technical and quality requirements, ensure capability to provide full traceability and compliance documentation, and be prepared for rigorous government oversight throughout the contract lifecycle.
For further details and to access the full solicitation, contractors should refer to the official notice on SAM.gov (Opportunity ID: b9eae9cec9e24f69a19f95912084016f).