PARTS KIT,VALVE

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QZA91

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4810

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation for the procurement of a specialized PARTS KIT, VALVE, under solicitation number N0010426QZA91. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4810, reflecting its focus on critical shipboard valve components. The opportunity is designated as a total small business set-aside, inviting qualified small business manufacturers with relevant expertise to participate. **Purpose and Scope** The primary objective of this procurement is to acquire a parts kit for a 4-inch ball valve, consisting of one ball and two mating seats, for use in a crucial shipboard system. The application of these components is of the highest importance, as the use of incorrect or defective material could result in catastrophic failure, including serious personnel injury, loss of life, or loss of vital shipboard systems. Accordingly, the material is designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures to ensure the delivery of conforming, traceable, and certified components. **Key Requirements and Deliverables** Contractors are required to manufacture and deliver a parts kit in strict accordance with NAVSEA drawings 7286278 (Seats) and 7285198 (Ball), with specific modifications and amplifications detailed in the solicitation. The ball must be produced from SAE-AMS-6931 or centrifugally cast 6AL-4V titanium (ASTM-B367, Grade C-5), and the seats from DuPont AF DE588 (Teflon Filled Acetal/Delrin), with all properties and test methods explicitly defined. The kit must meet rigorous dimensional, material, and performance specifications, including: - Precise keyway orientation and pilot hole dimensions for the ball. - Detailed material properties and conditioning for both metallic and non-metallic components. - Strict surface finish and waviness requirements for the ball, including a multi-step finishing and polishing process. - Visual and dimensional inspection criteria for seats, including limitations on Teflon string inclusions. - Comprehensive traceability and certification for all materials, with unique marking and tagging requirements. - Adherence to all applicable NAVSEA, ASTM, ANSI, ISO, and MIL standards as referenced in the solicitation. **Quality Assurance and Certification** The contract mandates a robust quality system, compliant with ISO-9001 (or MIL-I-45208 as an alternate), and calibration systems per ISO-10012 or ANSI-Z540.3 with ISO-17025. Contractors must submit documented quality system procedures for review and approval prior to award, and maintain these systems throughout the contract lifecycle. All certifications, including chemical and mechanical test reports, must be traceable to the delivered items and reference the applicable standards and acceptance criteria. Government Quality Assurance (GQA) at source is required, with the Defense Contract Management Agency (DCMA) or designated government representatives conducting inspections and audits. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, via the Wide Area Work Flow (WAWF) system, with no material shipped before acceptance is granted. **Configuration Control and Change Management** Contractors are responsible for maintaining the total equipment baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. All waivers and deviations require prior approval from the Contracting Officer, with detailed justification and impact analysis. **Special Considerations** - This is a rated order certified for national defense use under the Defense Priorities and Allocations System (DPAS), and contractors must comply with all related regulations. - Partial and early deliveries are authorized and encouraged, at no additional cost. - Past performance will be considered in the evaluation of offers. - The procurement is subject to Buy American and Free Trade Agreements provisions. - Mercury and mercury-containing compounds are strictly prohibited. - All packaging, preservation, and marking must comply with MIL-STD-2073 and contract-specific instructions. **Contracting Entity and Contact Information** - Contracting Agency: NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS) - Department: Department of Defense, Department of the Navy - Primary Contact: Michael E. Thoman, Telephone: 717-605-4608, Email: [email protected] - Place of Delivery: Portsmouth Naval Shipyard (N50286) - Notice URL: [https://sam.gov/opp/25e1a36b4a474fb8b4ce2acfd55e729f/view](https://sam.gov/opp/25e1a36b4a474fb8b4ce2acfd55e729f) **Procurement Timeline** - Notice Post Date: March 18, 2026 - Response Due Date: May 11, 2026 **Summary for Contractors** This solicitation represents a highly controlled, technically demanding procurement for critical shipboard valve components. Contractors must demonstrate proven capabilities in precision manufacturing, material traceability, and compliance with complex military and industry standards. The opportunity is well-suited for small businesses with established quality systems, experience in defense or naval applications, and the ability to manage detailed certification and configuration control requirements. Interested parties should carefully review all referenced drawings, specifications, and quality assurance provisions to ensure full compliance and eligibility. All contractual documents, including purchase orders and modifications, will be issued electronically, and bilateral agreement is required prior to execution. Contractors are encouraged to access all relevant drawings and documents via sam.gov and the Electronic Contractor Data Submission (ECDS) system as directed in the solicitation. For further information or to submit proposals, contact the NAVSUP WSS representative listed above.