BUSHING,SLEEVE

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFC87

NAICS

332991 - Ball and Roller Bearing Manufacturing

Classification Code

3120

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
Documents2
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support (WSS) Mechanicsburg, has issued a solicitation (N0010426QFC87) for the procurement of a Bushing, Sleeve component. This procurement is classified under NAICS code 332991 (Ball and Roller Bearing Manufacturing) and Product Service Code 3120, and is designated as a total small business set-aside, inviting participation exclusively from qualified small business concerns. **Purpose and Scope** The Bushing, Sleeve to be procured is a critical component intended for use in a crucial shipboard system. The nature of this application means that the supplied material is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured). The failure or malfunction of this part could result in serious personnel injury, loss of life, or catastrophic damage to shipboard systems or the vessel itself. As such, the procurement is subject to stringent quality assurance, traceability, and certification requirements to ensure the highest standards of safety and reliability. **Key Requirements and Deliverables** - **Technical Specifications:** The Hull Stem Sleeve must be manufactured in accordance with NAVSEA Drawing 803-5959302, Item 11, and General Notes Drawing 803-5959311, with material conforming to EB Spec 3644 (as modified by Supplementary Notes S4.F and S4.J). - **Testing and Certification:** Quantitative chemical and mechanical analysis is required, along with certifications for dye penetrant inspection and non-destructive testing (NDT) as specified. Radiography is required per the applicable drawings and standards, and all radiographic data must be submitted and approved prior to shipment. - **Quality Assurance:** The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. The quality system and all products are subject to government evaluation, verification, and acceptance. - **Traceability:** Full traceability from raw material to finished product is mandatory, with unique traceability markings and comprehensive certification data required for each item. Certification must include positive, unqualified statements of compliance and be signed (electronic signatures are acceptable under controlled processes). - **Welding and Brazing:** All welding, brazing, and allied processes must comply with NAVSEA and MIL standards, with procedures and qualification data submitted for approval prior to production or repair welding. - **Configuration Control:** The contractor is responsible for maintaining the equipment baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface. - **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements. - **Security and Information Control:** Access to certain drawings and technical data is restricted (NOFORN/NNPI). Contractors must complete a security agreement to obtain these documents. - **Government Source Inspection:** Government Quality Assurance at source is required, and the place of performance may not be changed without authorization. - **Submission and Acceptance:** Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to shipment. No material may be shipped before acceptance is received. **Schedule and Deliverables** - Submission of Certification Data CDRLs: At least 20 days prior to scheduled delivery. - Review/Acceptance of Certification CDRLs: Within 30 working days of receipt. - Radiographic Shooting Sketches (RSS): Due within 45 days after contract award; approval within 30 days. - Production Radiography: 135 days after RSS approval; approval within 30 days. - Final delivery of material: No later than 365 days after contract effective date. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg - **Department:** Department of Defense, Department of the Navy - **Primary Contact:** Ashton K. Perry, [email protected], Tel: 717-605-7574 - **Submission Portal:** Wide Area Work Flow (WAWF) - **Notification Email:** [email protected] **Procurement Type and Special Considerations** - **Solicitation Type:** Fixed-price supply contract - **Set-Aside:** Total Small Business Set-Aside - **DPAS Rating:** DO rated order, certified for national defense use under the Defense Priorities and Allocations System (DPAS) - **Security:** Access to certain technical data is restricted; compliance with NOFORN and Naval Nuclear Propulsion Information (NNPI) requirements is mandatory. - **Compliance:** Strict adherence to all referenced military, federal, and commercial specifications and standards is required. All waivers, deviations, and engineering changes must be submitted for government approval. **Constant Elements Over Contract Lifecycle** - The critical safety and quality assurance requirements, including traceability, certification, and configuration control, will remain in force throughout the contract. - The need for government source inspection, compliance with security protocols, and adherence to specified technical standards will persist for the duration of the contract. - The requirement for timely submission and approval of all certification and inspection data prior to shipment is a constant contractual obligation. **Summary for Contractors** This opportunity is suited for small businesses with demonstrated expertise in manufacturing high-reliability, precision components for naval or defense applications, and with robust quality assurance, traceability, and configuration management systems. Contractors must be prepared to comply with rigorous technical, quality, and security requirements, and to coordinate closely with government quality assurance and contracting personnel throughout the contract lifecycle. Access to restricted technical data and the ability to manage sensitive information in accordance with Navy protocols is essential. Interested parties should review the full solicitation and associated attachments on SAM.gov (Opportunity ID: fe9f1069d00c403f96445ca0557e39d2) and direct any questions to the primary contact listed above. The solicitation is currently active, with a response deadline of December 5, 2026.