TEE,PIPE

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QNB78

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4730

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (Procurement Identifier: N0010426QNB78) for the supply of a specialized pipe fitting, specifically a 2 1/2 X 2 X 2 inch NPS TEE, to be used in critical shipboard systems. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4730, reflecting its focus on high-integrity metal pipe fittings for naval applications. **Purpose and Scope** The primary objective of this solicitation is to acquire TEE, PIPE components that are integral to the safe and reliable operation of vital shipboard systems. The nature of the application means that any failure or defect in the supplied material could result in catastrophic consequences, including personnel injury, loss of life, or loss of the ship itself. As such, the material is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures throughout the procurement and manufacturing process. **Key Requirements and Deliverables** Contractors are required to manufacture the TEE in strict accordance with NAVSHIPS Drawing 1385942, piece 9, with specific modifications and amplifications as detailed in the solicitation. The material for the TEE must be either Alloy UNS C92200 (per ASTM-B61, ASTM-B584, or ASTM-B505) or Alloy UNS C90300 (per ASTM-B584 or ASTM-B505). Welding is expressly prohibited on these materials. Each TEE must undergo and be certified for hydrostatic testing as specified in Note 4.2.2 of the referenced NAVSHIPS drawing. Radiographic testing (RT) is mandatory for each TEE, with all pieces to be permanently marked with "RT" and a unique RT serial number traceable to the RT film. The contractor is responsible for preparing and submitting radiographic shooting sketches (RSS) for approval, and production radiography must receive final Navy acceptance prior to shipment. A comprehensive Certificate of Compliance is required, certifying full conformance to all contract requirements, including traceability to material certifications, test results, and compliance with all invoked specifications and drawings. The contractor must also maintain configuration control and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. Quality assurance is paramount. The contractor must implement and maintain a quality system compliant with ISO-9001 (or MIL-I-45208), with calibration systems per ISO-10012 or ANSI-Z540.3 with ISO-17025. The quality system and all related procedures are subject to government review and audit. Government Quality Assurance (GQA) at source is required, and the place of performance may not be changed without contracting officer authorization. All certification data, including test and inspection results, must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before formal acceptance is received. **Contracting Entity and Contact Information** - Contracting Entity: NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH) - Department: Department of Defense, Department of the Navy - Primary Contact: Jocelyne Dzonangfouego - Telephone: 717-605-2982 - Email: [email protected] **Procurement Type and Special Considerations** This is a formal solicitation (SOLICITATION) and is a Total Small Business Set-Aside, in accordance with applicable federal regulations. The procurement is conducted under Emergency Acquisition Flexibilities (EAF), and the resultant award will be issued bilaterally, requiring written acceptance by the contractor prior to execution. The contract will be certified for national defense under the Defense Priorities and Allocations System (DPAS), with a rated order for national defense, emergency preparedness, and energy program use. All contractual documents may be issued electronically, and the government’s acceptance of the contractor’s proposal constitutes bilateral agreement to this process. Contractors must ensure that all subcontractors comply with the same quality and traceability requirements, and government inspection rights extend to all sub-tier suppliers. **Constant Elements Over Contract Lifecycle** - The requirement for strict adherence to technical drawings, specifications, and quality assurance protocols will remain unchanged. - The need for traceability, certification, and compliance documentation is a constant throughout the contract. - Government source inspection and acceptance procedures, including the use of WAWF and submission to Portsmouth Naval Shipyard, are fixed requirements. - The prohibition on the use of mercury or mercury-containing compounds, and the requirement for all materials to be free from such contamination, is non-negotiable. - The contract’s classification as a Critical Safety Item (CSI) and the associated controls and definitions will persist for the duration of the contract. **Summary for Contractors** This opportunity is suited for small businesses with demonstrated expertise in the manufacture of high-integrity, certified metal pipe fittings for defense applications, and with robust quality assurance systems in place. Contractors must be capable of meeting rigorous technical, testing, and documentation requirements, and must be prepared for comprehensive government oversight and source inspection. The contract’s critical safety designation and national defense priority underscore the importance of reliability, traceability, and compliance at every stage of production and delivery. Interested parties should review the full solicitation and associated technical documents, and direct any requests for drawing access or clarifications to the primary contact listed above. The deadline for receipt of offers is June 30, 2026. For further details and to access the solicitation, visit: [SAM.gov Opportunity Link](https://sam.gov/opp/b17bd5e7dd9d43f083b7f6edb9cc4a2a/view).