NUT,SELF-LOCKING,HE

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QNB15

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5310

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
Documents1
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation (N0010426QNB15) for the procurement of a specialized self-locking hex nut, classified as a critical safety item (CSI) for use in vital shipboard systems. This procurement is designated as a total small business set-aside under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing), with a Product Service Code of 5310. The solicitation is active and responses are due by November 12, 2026. **Purpose and Scope** The primary objective of this procurement is to acquire 100 units of an 800°F, silver-plated, self-locking hex nut, manufactured in strict accordance with Newport News Shipbuilding drawing 501-4457023 item 25, NASM25027, and a modified NASM21046. These nuts are intended for installation in critical shipboard systems where material failure could result in catastrophic consequences, including loss of life, shipboard systems, or the vessel itself. As such, the item is designated as "Special Emphasis Material" (Level I, Scope of Certification, or Quality Assured), invoking rigorous control and quality assurance procedures. **Key Requirements and Deliverables** - **Technical Specifications:** The nut must meet detailed dimensional, material, and performance requirements, including modifications to NASM21046 (e.g., size 2 - 4-1/2 UNJC - 2B, minimum axial tensile strength of 225,000 lbs). The material specified is SAE-AMS-QQ-S-763, Class 304, silver-plated. - **Testing and Certification:** The contractor must provide certifications for dye penetrant inspection (per T9074-AS-GIB-010/271 or ASTM-E1417/ASTM-E1444), intergranular corrosion testing (for applicable material classes), and quality conformance tests (per NASM25027). First Article Testing (FAT) is required unless previously qualified, with documentation to be submitted as specified. - **Traceability and Marking:** Each nut must be traceable to its heat/lot number, with permanent marking in accordance with MIL-DTL-1222 and MIL-STD-792. Markings must include the material symbol, manufacturer’s identification, and traceability code. - **Quality Assurance:** The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration per ISO-10012 or ANSI-Z540.3/ISO-17025. The system and products are subject to government evaluation and source inspection. - **Documentation:** A comprehensive certificate of compliance is required, demonstrating full traceability and compliance with all contract requirements. Test certifications must reference applicable standards and acceptance criteria. - **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements. - **Government Source Inspection:** All items are subject to government quality assurance at the source, and no material may be shipped prior to receipt of government acceptance. - **Subcontractor Controls:** The prime contractor is responsible for ensuring all sub-tier suppliers meet the same quality and traceability requirements, with periodic audits and documented supplier selection criteria. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH) - **Department/Agency:** Department of Defense, Department of the Navy - **Primary Contact:** Zachary R. Morrill, [email protected], Tel: 717-605-1552 - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/ae3ee6f3d1dd48b781db0f5be2ecc9ba/view) **Procurement Type and Special Considerations** This is a fixed-price solicitation issued under Emergency Acquisition Flexibilities (EAF) and will result in a bilateral award requiring written contractor acceptance. The contract will be DO-rated under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense and emergency preparedness. All contractual documents may be issued electronically, and the government will consider past performance in the evaluation of offers. **Set-Aside and Compliance** The opportunity is a total small business set-aside. Contractors must comply with all applicable federal, military, and commercial specifications and standards as referenced in the solicitation. The procurement invokes strict configuration control, traceability, and quality assurance requirements due to the critical nature of the item. **Summary for Contractors** This solicitation represents a highly controlled, technically demanding procurement for a critical shipboard fastener. Contractors must demonstrate robust quality management systems, proven experience with high-reliability hardware, and the ability to maintain full material traceability and compliance with stringent Navy and industry standards. The opportunity is well-suited for small businesses with established capabilities in precision fastener manufacturing for defense applications, particularly those familiar with Level I/SUBSAFE requirements and government source inspection protocols. Interested parties should review the full solicitation and referenced documents for complete technical and quality requirements, and ensure all certifications, documentation, and quality procedures are in place prior to submission. All inquiries and requests for access to drawings should be directed to the primary contact listed above.