NUT, STEM RETAINING
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QNB21
NAICS
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Classification Code
5310
Additional Details
Documents1
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation (Procurement Identifier: N0010426QNB21) for the supply of Nut, Stem Retaining components, specifically for 6-inch valves, to be used in critical shipboard systems. This procurement is classified under NAICS Code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5310, reflecting its focus on specialized fastener manufacturing for defense applications.
**Purpose and Scope**
The primary objective of this solicitation is to procure 50 units of Nut, Stem Retaining, which are integral to the operation and safety of vital shipboard systems. The components are designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), underscoring their criticality; incorrect or defective material could result in catastrophic system failure, serious injury, or loss of life. As such, stringent quality assurance and traceability requirements are imposed to ensure the integrity and reliability of the supplied items.
**Key Requirements and Deliverables**
- **Technical Specifications:** The nuts must conform to Naval Ship Systems Command Drawing 845-4558769, Item 27A, with material specified as ASTM-B505, Alloy C90300. Weld repair is explicitly prohibited for this material.
- **Testing and Certification:** Contractors must provide quantitative chemical and mechanical analysis for each nut, accompanied by certifications for visual inspection and thread inspection per FED-STD-H28 or ASME B1 series. O-ring grooves and sealing surfaces must be inspected according to contractually invoked standards, with repairs subject to approval if they exceed specified tolerances.
- **Traceability:** Each item must be marked with a unique traceability number, heat-lot, or heat-treat number, directly linking it to certification data. Certification reports must be positive, unqualified, and signed, with no disclaimers permitted.
- **Quality System:** Suppliers are required to maintain a quality system compliant with ISO-9001, ISO-10012, ISO/IEC 17025, or ANSI/NCSL Z540.3, or MIL-I-45208 with MIL-STD-45662 calibration requirements. Documentation of the quality system must be submitted to the Procurement Contracting Officer (PCO) prior to award, unless already on file.
- **Inspection and Acceptance:** Government Quality Assurance will be performed at the source, and the place of performance may not be changed without PCO authorization. All inspection records must be traceable, and the government reserves the right to inspect supplies at subcontractor facilities.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements.
- **Compliance and Certification:** A certificate of compliance must be submitted, showing traceability to the marking applied on each item and certifying full compliance with all specifications and requirements. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, via Wide Area Work Flow (WAWF), with no material shipped before acceptance.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), a federal office under the Department of Defense, Department of the Navy.
- **Primary Contact:** Zachary R. Morrill, Telephone: 717-605-1552, Email: [email protected].
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/3fea7f8df83b46a8ae0c3fd8ed71067f/view)
**Procurement Type and Special Considerations**
- **Solicitation Type:** This is a fixed-price solicitation, with inspection and acceptance points to be determined.
- **Set-Aside:** The procurement is a total small business set-aside, encouraging participation from qualified small business manufacturers.
- **Emergency Acquisition Flexibilities:** The requirement is issued under Emergency Acquisition Flexibilities (EAF), and the resultant contract will be DO certified for national defense under the Defense Priorities and Allocations System (DPAS).
- **Bilateral Award:** The contract will be awarded bilaterally, requiring written acceptance from the contractor prior to execution.
- **AbilityOne Support:** The Navy may utilize AbilityOne support contractors, and offeror information may be released accordingly.
- **Warranty:** A one-year warranty from the date of delivery is required for all supplied items.
**Constant Elements Throughout Contract Lifecycle**
- The requirement for traceability, certification, and compliance with quality assurance standards will remain in force throughout the contract.
- Government inspection and acceptance procedures, including submission of certification data to Portsmouth Naval Shipyard, are mandatory for each shipment.
- The prohibition of mercury and mercury-containing compounds, as well as the requirement for positive, unqualified certification statements, are enduring contract stipulations.
- Configuration control, including the submission of Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface, is a constant requirement.
- All waivers and deviations must be reviewed and approved by the Contracting Officer, with detailed documentation and classification.
**Summary for Contractors**
This solicitation represents a highly specialized and regulated opportunity for manufacturers of critical shipboard fasteners, specifically Nut, Stem Retaining for 6-inch valves. Contractors must demonstrate robust quality assurance systems, traceability protocols, and the ability to comply with rigorous certification and inspection requirements. The contract is set aside for small businesses and is subject to emergency acquisition and national defense priority regulations. Interested parties should carefully review the technical specifications, quality system requirements, and certification procedures to ensure alignment with their capabilities and compliance infrastructure. For further information or to request access to drawings, contractors should contact the primary POC and refer to the solicitation page on SAM.gov.
Response to this solicitation is due by August 5, 2026, and all inquiries should be directed to Zachary R. Morrill at NAVSUP WSS Mechanicsburg.