CONNECTOR,PENETRATI
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFC04
NAICS
335931 - Current-Carrying Wiring Device Manufacturing
Classification Code
5935
Additional Details
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support office in Mechanicsburg, PA, has issued a solicitation (N0010426QFC04) for the procurement of a specialized electrical connector, specifically a "Connector, Penetration" (Product Service Code 5935 – Connectors, Electrical), intended for use in critical shipboard systems. This procurement falls under NAICS code 335931 (Current-Carrying Wiring Device Manufacturing).
**Purpose and Scope**
The primary objective of this procurement is to acquire pressure-proof electrical hull penetrators and associated cable harness assemblies for the SSN 688 Class Vertical Launch System. These components are designated as "Special Emphasis Material" (Level I, Scope of Certification, or Quality Assured) due to their application in vital shipboard systems where failure could result in catastrophic consequences, including loss of life, shipboard systems, or the vessel itself. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the highest level of reliability and safety.
**Key Requirements and Deliverables**
- **Manufacturing and Design:** The supplied items must conform to Electric Boat (EB) Specification 3004 and related drawings, with specific part numbers and material requirements detailed in the solicitation. Pressure-proof caps and sealing plugs are not required.
- **First Article Testing (FAT):** A government-conducted, destructive first article test is required. The contractor must deliver one Penetrator Assembly to Portsmouth Naval Shipyard for testing in accordance with EB Specification 3004, paragraph 4.4. The FAT sample is not to be counted against the contract quantity.
- **Material and Certification:** All materials used must meet specified chemical and mechanical properties, with quantitative analysis required for certain parts. Certifications for non-destructive testing, dye penetrant inspection, ultrasonic inspection, and other tests are mandatory. Only laboratories listed in the solicitation are authorized to perform certain critical tests (e.g., Slow Strain Rate Tensile Test of QQ-N-286).
- **Traceability:** Full traceability from raw material to finished product is required, with permanent marking and documentation to ensure compliance with all specifications. Certification data must be submitted and accepted prior to shipment.
- **Quality Assurance:** The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. Government source inspection at the contractor’s facility is required, and the contractor’s quality system is subject to audit and approval.
- **Configuration Control:** The contractor is responsible for maintaining the equipment baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface.
- **Welding and Brazing:** All welding and brazing must comply with NAVSEA and Electric Boat standards, with procedures and personnel qualifications submitted for approval prior to production. Repair welding on certain materials is prohibited.
- **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and other contract-specific requirements.
- **Documentation:** Certificates of compliance, test certifications, and other objective quality evidence (OQE) must be provided with each shipment, referencing all applicable standards and contract requirements.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support (WSS) Mechanicsburg
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Benjamin T. Spangler, Phone: 771-229-0573, Email: [email protected]
- **Submission and Acceptance:** Certification data must be submitted via Wide Area Work Flow (WAWF) and accepted by Portsmouth Naval Shipyard (DODAAC N50286) prior to shipment.
**Procurement Type and Special Considerations**
- **Procurement Type:** Solicitation for a fixed-price supply contract.
- **Set-Aside Status:** The solicitation was previously set aside for small business but this set-aside has been dissolved per recent amendments.
- **DPAS Rating:** Any resulting contract will be a "DO" rated order under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense.
- **Emergency Acquisition Flexibilities:** The order is issued under Emergency Acquisition Flexibilities (EAF).
- **Evaluation Criteria:** Past performance will be considered in the evaluation of offers.
- **Access to Drawings:** Contractors must request access to controlled drawings via SAM.gov and notify the primary POC.
**Constant Elements Over Contract Lifecycle**
- The requirement for strict adherence to technical specifications, quality assurance, and traceability will remain throughout the contract.
- All documentation, certification, and configuration control processes are integral and ongoing.
- Government source inspection and acceptance procedures will be enforced for all deliveries.
- The contract’s critical safety designation and associated controls will persist for the duration of performance.
**Summary for Contractors**
This opportunity is highly specialized and best suited for manufacturers with proven experience in producing critical, pressure-proof electrical connectors for naval applications, and with robust quality assurance, traceability, and configuration management systems. The contract’s requirements for first article testing, extensive material and process certifications, and compliance with a wide range of military and industry standards are stringent. Contractors must be prepared for detailed government oversight, including source inspection and documentation review, and must have the capability to manage complex certification and traceability requirements throughout their supply chain. The contract’s DPAS rating and emergency acquisition status underscore the urgency and importance of timely, compliant delivery.
Interested parties should review the full solicitation and associated specifications, ensure they can meet all technical and quality requirements, and contact the listed POC for access to controlled documents or with any questions regarding compliance or submission procedures.
For more information and to access the solicitation, visit: [SAM.gov Opportunity Link](https://sam.gov/opp/7fd04c05fbc145d0abea16cb25ee8b0a/view).