SCREW, HEX CAP
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QNB63
NAICS
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Classification Code
5305
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (N0010426QNB63) for the procurement of a specialized Screw, Hex Cap. This procurement is classified under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5305, reflecting its focus on critical fastener components for shipboard applications. The solicitation is a total small business set-aside, inviting qualified small business manufacturers to participate.
**Purpose and Scope**
The primary objective of this procurement is to acquire hex cap screws that will be used in crucial shipboard systems. These screws are designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), meaning their integrity is vital to the safety and operational readiness of naval vessels. The failure of these components could result in serious personnel injury, loss of life, or catastrophic damage to shipboard systems or the vessel itself. As such, the procurement invokes stringent quality assurance and traceability requirements to ensure only fully compliant material is delivered.
**Key Requirements and Deliverables**
Contractors are required to manufacture and deliver hex cap screws conforming to MIL-DTL-1222, with the following specific attributes:
- Material: K-MONEL, Grade 500 (QQ-N-286), solution annealed and age hardened
- Size: 7/8 inch diameter, 2 3/4 inches length
- Thread Series: 9 UNC, Class 3A fit, chamfered end configuration
- Marking: As per MIL-DTL-1222 and MIL-STD-792, including material symbol, manufacturer’s ID, and traceability marking
- Unit of Issue: Each, with one additional fastener per heat/lot for traceability
The screws must be manufactured, tested, and certified in accordance with a comprehensive set of referenced standards, including but not limited to ANSI/ASQ Z1.4, ASTM-A574, ASTM-F606, MIL-STD-792, MIL-STD-2132, ISO 9001, ISO 10012, and ISO/IEC 17025. All heat treatment, mechanical, and non-destructive testing must be performed as specified, with certain tests (e.g., Slow Strain Rate Tensile Test) required to be conducted at approved laboratories.
**Quality Assurance and Certification**
Given the critical nature of the application, the contract mandates a robust quality system (ISO 9001 or MIL-I-45208 with calibration per MIL-STD-45662 or ANSI-Z540.3/ISO-17025). Contractors must maintain detailed inspection and test records, ensure full traceability from raw material to finished product, and submit comprehensive certification data for each shipment. Certification must include chemical and mechanical test results, traceability markings, and a certificate of compliance affirming conformance to all contract requirements.
Government Quality Assurance (GQA) at source is required, and the place of performance may not be changed without contracting officer approval. All certification documentation must be submitted via Wide Area Workflow (WAWF) and accepted by Portsmouth Naval Shipyard prior to shipment. No material may be shipped before formal acceptance.
**Packaging and Delivery**
Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and any additional contract requirements. The delivery term is FOB Destination, with a required delivery date of 180 days from award.
**Contracting Entity and Contact Information**
- Contracting Office: NAVSUP Weapon Systems Support Mechanicsburg
- Department: Department of Defense, Department of the Navy
- Primary Contact: Heather R. Jones, 717-605-4866, [email protected]
- Solicitation Close Date: March 27, 2026
- Solicitation URL: [SAM.gov Opportunity](https://sam.gov/opp/1c66a4abf92e42cc89c3c89ffd42595a/view)
**Procurement Type and Special Considerations**
This is a bilateral, fixed-price solicitation issued under Emergency Acquisition Flexibilities (EAF), and the resultant contract will be DO-rated under the Defense Priorities and Allocations System (DPAS) for national defense. The procurement is a total small business set-aside, and past performance will be considered in accordance with FAR 13.106(a)(2). The contract will be awarded bilaterally, requiring written acceptance by the contractor.
**Constant Elements Throughout Contract Lifecycle**
- Strict adherence to technical and quality requirements for Level I/SUBSAFE material
- Full traceability and certification for all delivered items
- Government source inspection and acceptance prior to shipment
- Compliance with all referenced military and industry standards
- Maintenance of a robust, auditable quality system
- Packaging and marking per military standards
- Ongoing configuration control and change management, with all waivers, deviations, and engineering changes subject to government approval
**Summary for Contractors**
This opportunity is suited for small business manufacturers with demonstrated experience in producing high-reliability, traceable fasteners for defense or similarly regulated industries. Contractors must be capable of meeting rigorous technical, quality, and documentation requirements, and must have systems in place for configuration management, traceability, and government source inspection. The contract’s critical safety designation and DPAS rating underscore the importance of compliance and reliability throughout the contract lifecycle.
Interested parties should review the full solicitation and referenced specifications, and direct any questions to the contracting officer listed above.