CAP,SCREW SOCKET HD

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QNB65

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5305

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QNB65) for the supply of "Cap, Screw Socket Head" fasteners. This procurement is classified under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5305, indicating its focus on high-quality, precision fasteners for critical shipboard applications. **Purpose and Scope** The primary purpose of this solicitation is to acquire socket head cap screws for use in vital shipboard systems. These fasteners are designated as "Special Emphasis Material" (Level I, Scope of Certification, or Quality Assured), reflecting their critical role in ensuring the safety and operational integrity of naval vessels. The use of incorrect or defective material could result in catastrophic failure, serious injury, or loss of shipboard systems, underscoring the stringent requirements and controls imposed throughout the contract lifecycle. **Key Requirements and Objectives** Contractors are required to manufacture and deliver socket head cap screws that strictly conform to MIL-DTL-1222 and other referenced specifications. The fasteners must be: - Type II, Grade 500 (QQ-N-286), solution annealed and age hardened - 1 1/4 inch in diameter, 3 1/2 inches in length, with 7 UNRC thread series, Class 3A fit, and chamfered end configuration - Marked for traceability, including material symbol, manufacturer identification, and unique heat/lot numbers - Subject to rigorous testing and certification, including liquid penetrant inspection, ultrasonic inspection (for certain sizes/materials), wedge tensile tests, and slow strain rate tensile tests performed by approved laboratories Complete traceability is required for each fastener, including an extra fastener per heat/lot for verification. Certifications must be submitted for all required tests, and material certification reports must be positive, unqualified, and traceable to the actual attributes of the material supplied. **Quality Assurance and Deliverables** The contract mandates a robust quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. Quality system documentation must be available for government review, and government quality assurance will be performed at the source. Inspection records, test reports, and material certifications must be maintained and made available for government inspection. Final inspection requires zero defects for lot acceptance, with sampling plans per applicable military standards or ANSI/ASQ-Z1.4. All metallic material must be 100% inspected for traceability marking and legibility. Certificates of compliance must show traceability to individual item markings and include detailed information as specified in the contract. **Packaging and Delivery** Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and contract schedule requirements. The delivery date is set at 180 days FOB Destination. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before receipt of acceptance. **Contracting Entity and Contact Information** - Contracting Entity: NAVSUP Weapon Systems Support Mechanicsburg (Federal Office) - Department: Department of Defense, Department of the Navy - Primary Contact: Heather R. Jones, Telephone: 717-605-4866, Email: [email protected] - Notice URL: [SAM.gov Opportunity](https://sam.gov/opp/f7d4d3b5ad3941de9eedb679f03af5c0/view) **Procurement Type and Set-Aside** This is a fixed-price solicitation, issued under Emergency Acquisition Flexibilities (EAF), and is a total small business set-aside. The award will be bilateral, requiring written acceptance by the contractor. The contract is DO certified under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense and emergency preparedness. **Special Considerations** - Past performance will be considered in offer evaluation per FAR 13.106(a)(2). - Access to drawings, if included, must be requested via SAM.gov and coordinated with the listed POC. - Contractors must maintain configuration control and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface. - Mercury and mercury-containing compounds are strictly prohibited. - Subcontractor quality assurance and traceability requirements are extensive, with government rights to inspect at source. **Constant Elements Throughout Contract Lifecycle** - Stringent material, testing, and certification requirements - Robust quality assurance and traceability controls - Compliance with military and industry standards - Government inspection and acceptance procedures - Total small business set-aside and DPAS priority rating **Response and Timeline** The solicitation is active, with a response deadline of March 27, 2026. Contractors interested in this opportunity should ensure their capabilities align with the technical, quality, and traceability requirements outlined above and be prepared to comply with all documentation, inspection, and certification procedures specified by the Department of the Navy. This opportunity is well-suited for manufacturers with proven experience in producing high-integrity fasteners for defense applications, robust quality systems, and the ability to meet rigorous traceability and certification standards.