SCREW,CAP,HEXAGON H

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFB93

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5305

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QFB93) for the supply of Self-Locking Hex Cap Screws, classified under NAICS Code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5305. This procurement is critical to the operational integrity of shipboard systems, with the supplied material designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured), reflecting its role in preventing catastrophic failures that could result in serious injury, loss of life, or loss of vital shipboard systems. **Purpose and Scope** The primary objective of this solicitation is to procure Self-Locking Hex Cap Screws in accordance with Oil States drawing 302893, part number 302893-104, and as further specified in the contract. These fasteners are intended for use in crucial shipboard systems, requiring rigorous quality assurance and traceability to ensure compliance with Navy standards and to mitigate risks associated with incorrect or defective material. **Key Requirements and Deliverables** - **Technical Specifications:** Fasteners must conform to detailed requirements, including material composition (QQ-N-286, Class A, Form 2, Annealed and Age Hardened per MIL-DTL-1222), self-locking element compliance with MIL-DTL-18240, and mechanical properties verified through tensile, yield, elongation, and hardness tests. - **Testing and Certification:** Certifications are required for liquid penetrant inspection, ultrasonic inspection (for materials with diameter or minimum distance between parallel surfaces of 4 inches or greater), and wedge tensile tests. All tests must be performed by approved laboratories, with results traceable to each heat/lot of material. - **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. The quality system is subject to government audit and must be documented and available for review. - **Traceability and Marking:** Each fastener must be permanently marked for traceability, including material symbol, manufacturer identification, and unique heat/lot numbers. Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to shipment, via Wide Area Work Flow (WAWF). - **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements. - **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. - **Compliance and Documentation:** Certificates of compliance must be provided, demonstrating full adherence to specifications, with positive and unqualified statements. All waivers and deviations require contracting officer approval. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), a federal office under the Department of Defense, Department of the Navy. - **Primary Contact:** Jordan D. Neely, Telephone: 717-605-8197, Email: [email protected]. - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/253e6cfbace44adba8e83267cc81b76a/view) - **Response Deadline:** March 27, 2026, 20:03. **Procurement Type and Special Considerations** This is a fixed-price solicitation with a DO priority rating under the Defense Priorities and Allocations System (DPAS), certified for national defense use. Only sources with an acceptable Quality Control Manual are eligible for award; the procurement will not be delayed for approval of additional sources. Early and incremental delivery is acceptable at no additional cost. The final delivery of material is required within 365 days of contract award. **Constant Elements Throughout Contract Lifecycle** - Rigorous quality assurance and traceability requirements. - Compliance with Navy and federal specifications and standards. - Mandatory certification and documentation procedures. - Government review and acceptance prior to shipment. - Configuration control and change management protocols. - DPAS priority rating and national defense certification. **Summary for Contractors** Contractors considering this opportunity must possess robust manufacturing capabilities for high-integrity fasteners, a documented and auditable quality system, and experience with military-grade traceability and certification processes. The scope and requirements are stringent, reflecting the critical safety and operational role of the supplied material. All deliverables must be fully compliant with the specified standards, and contractors must be prepared for comprehensive government oversight and documentation throughout the contract lifecycle. For further information or to submit a response, contact Jordan D. Neely at NAVSUP WSS Mechanicsburg. The solicitation remains active, and interested parties should review the full requirements and ensure alignment with their technical and quality assurance capabilities.