PARTS KIT, BALL VAL
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFC65
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
Documents1
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation for the refurbishment and supply of a Parts Kit for a Ball Valve, intended for use in a critical shipboard system. This procurement, identified by solicitation number N0010426QFC65, is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820. The solicitation is currently active, with a response deadline of June 10, 2026.
**Purpose and Scope**
The primary objective of this procurement is to ensure the availability of a refurbished ball valve parts kit that meets stringent quality and traceability requirements for naval applications. The material covered under this contract is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), reflecting its critical role in shipboard systems where failure could result in serious injury, loss of life, or catastrophic damage to the vessel. As such, the contract invokes special control procedures to guarantee the receipt of correct and fully compliant material.
**Key Requirements and Deliverables**
Contractors are required to perform teardown, evaluation, inspection, and full repair of the ball valve kit to restore it to "like new" or "A" condition, in accordance with NAVSEA Drawing 845-7016077 and associated liability drawings. The kit consists of one Ball (Item 2), one Seat (Item 114), and one Seat (Item 115), with specific material and dimensional requirements:
- **Ball (Item 2):** Must be made from centrifugally cast 6AL-4V titanium (ASTM-B367, Grade C-5) or ASTM-B381, Grade F-5, with defined mechanical properties.
- **Seats (Items 114 and 115):** Manufactured from MC903 (Type 6 cast nylon), meeting Electric Boat Division Specification 2000 and detailed physical property requirements.
All parts must be inspected for refurbishment potential, with traceability maintained through unique markings (MIC code, heat/heat lot code, or contractor traceability number). Non-usable or improperly marked parts must be replaced, and certifications submitted. The refurbishment process includes dimensional rework, surface waviness verification, and application of Chemours (formerly DuPont) Teflon coatings per specified drawings.
Additional requirements include:
- Submission of Certification Data CDRLs at least 20 days prior to scheduled delivery.
- PNSY review/acceptance of Certification CDRLs within 6 working days.
- Final delivery of material within 274 days after contract effective date.
- Provision of NOT TO EXCEED (NTE) or FIRM FIXED PRICE (FFP) quotes, including teardown, evaluation, inspection, and repair.
- Submission of beyond repair (BR)/beyond economic repair (BER) pricing.
- Exclusion of shipping costs, as government shipping systems will be used.
- Utilization of Commercial Asset Visibility (CAV) for asset tracking.
**Quality Assurance and Certification**
The contract mandates a robust quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. Contractors must submit documented quality system procedures for review and maintain records of all inspections and tests. Government Quality Assurance will be performed at source, and any changes to the quality system require government concurrence.
Material traceability and certification are paramount. Contractors must ensure traceability from material to certification test reports, with permanent marking requirements specified for each component. Certifications must be positive, unqualified, and reference the applicable standards and specifications. Nonconforming products must be controlled and reported, and all material requiring traceability must be 100% inspected for marking and legibility.
**Special Considerations**
- Access to NOFORN and/or Naval Nuclear Propulsion Information is required; contractors must complete a security agreement form for drawing access.
- The order is "DO" rated under the Defense Priorities and Allocations System (DPAS), certified for national defense use.
- Emergency Acquisition Flexibilities (EAF) are invoked.
- This is a Level 1 Repair, with special emphasis on configuration control, waivers/deviations, and engineering change proposals.
- Mercury and mercury-containing compounds are strictly prohibited.
- Preservation, packaging, and marking must comply with MIL-STD 2073.
**Contracting Entity and Contact Information**
The contracting entity is NAVSUP Weapon Systems Support Mechanicsburg, a federal office under the Department of Defense, Department of the Navy. The primary point of contact is Alana M. Boyer, reachable at 717-605-1234 or via email at [email protected]. Certification documentation must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to shipment, with notifications sent to [email protected].
**Procurement Type and Set-Aside**
While the solicitation initially included a small business set-aside, amendments have dissolved this requirement. Contractors are encouraged to review the solicitation for any updated clauses or requirements.
**Constant Elements Throughout Contract Lifecycle**
Throughout the contract lifecycle, the following elements will remain constant:
- Rigorous quality assurance and traceability requirements.
- Compliance with specified material, dimensional, and certification standards.
- Government inspection and acceptance procedures.
- Configuration control and documentation requirements.
- Security and access controls for sensitive information.
**Summary**
This solicitation represents a highly specialized opportunity for contractors with expertise in metal valve and pipe fitting manufacturing, particularly those capable of meeting stringent naval quality, traceability, and certification requirements. The scope encompasses refurbishment, testing, certification, and compliance with detailed technical specifications, with a strong emphasis on safety, reliability, and configuration control. Interested contractors should carefully review the solicitation documents and ensure their capabilities align with the outlined requirements before submitting a response.
For further details and access to solicitation documents, visit the official SAM.gov opportunity page: [https://sam.gov/opp/6bacc3cd7a4d45c48d846f43f42ef670/view](https://sam.gov/opp/6bacc3cd7a4d45c48d846f43f42ef670/view).