PIPE,METALLIC
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QNB42
NAICS
331420 - Copper Rolling, Drawing, Extruding, and Alloying
Classification Code
4710
Additional Details
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support (WSS) office in Mechanicsburg, PA, has issued a solicitation (Procurement Identifier: N0010426QNB42) for the supply of metallic pipe, classified under Product Service Code 4710. This procurement is a critical requirement intended for use in vital shipboard systems, where material integrity is paramount due to the potential for catastrophic failure, serious personnel injury, or loss of shipboard capability if incorrect or defective materials are used. As such, the material is designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures.
**Purpose, Scope, and Intended Outcomes**
The primary objective of this solicitation is to procure 16-inch nominal size, Schedule 100 seamless carbon steel pipe, manufactured and tested in strict accordance with MIL-P-24691 and MIL-P-24691/1, for integration into critical Navy shipboard systems. The procurement supports national defense priorities and is certified as a DO-rated order under the Defense Priorities and Allocations System (DPAS), reflecting its essential role in emergency preparedness and energy program use.
**Key Requirements, Objectives, and Deliverables**
Contractors are required to supply seamless carbon steel pipe meeting the following specifications:
- **Material:** Seamless carbon steel pipe, Grade B, per MIL-P-24691/1.
- **Dimensions:** 16-inch nominal pipe size, Schedule 100. Lengths must be single random lengths of 15 to 22 feet, with up to 5% permissible at 12 to 15 feet and 5% at 22 to 24 feet.
- **Testing and Inspection:** Ultrasonic inspection (shear wave test in two opposite circumferential directions) is mandatory. Hydrostatic testing is required; eddy current testing is not an acceptable substitute. Customer source inspection/witness of ultrasonic testing is required.
- **Certification:** Comprehensive certification is required for chemical and mechanical properties, quality conformance, and compliance with all invoked specifications and drawings. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, via the Wide Area Work Flow (WAWF) system.
- **Traceability:** Full traceability from material to certification test reports is required, with permanent and temporary marking on each pipe end as per MIL-STD-792 and other referenced standards.
- **Quality System:** Contractors must maintain a quality system compliant with ISO 9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO 10012 or ANSI-Z540.3 with ISO 17025. The system and procedures are subject to government review and audit.
- **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements. The use of varnish as a preservative is prohibited.
- **Mercury Exclusion:** No mercury or mercury-containing compounds may be intentionally added or come into contact with the supplied material.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support (WSS) Mechanicsburg
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Jocelyne Dzonangfouego, Telephone: 717-605-2982, Email: [email protected]
- **Location:** Mechanicsburg, PA
- **NAICS Code:** 331420 (Copper Rolling, Drawing, Extruding, and Alloying)
- **PSC:** 4710
**Procurement Type, Set-Aside, and Special Considerations**
This solicitation is issued as a total small business set-aside, in accordance with FAR 52.219-6 (OCT 2020) and related deviations. Only qualified small businesses are eligible to participate. The procurement leverages Emergency Acquisition Flexibilities (EAF), and the resultant award will be bilateral, requiring written contractor acceptance prior to execution. All contractual documents will be considered issued upon electronic transmission or mailing by the government.
The solicitation includes security prohibitions and exclusions per Class Deviation 2026-O0025 (FEB 2026), and contractors must comply with all applicable laws, regulations, and referenced standards. Access to any included drawings must be requested via the solicitation page on SAM.gov, with follow-up to the listed point of contact.
**Quality Assurance and Lifecycle Considerations**
Given the critical safety item (CSI) designation, the contract invokes rigorous quality assurance, traceability, and configuration control requirements. Contractors must maintain detailed inspection and test records, ensure traceability through all processing and subcontracted operations, and provide objective quality evidence (OQE) for all supplied material. Any waivers, deviations, or engineering changes require prior government approval and must be submitted through the Electronic Contractor Data Submission (ECDS) system.
No material may be shipped prior to government acceptance of certification data. The contract also specifies requirements for handling government-furnished material, subcontractor oversight, and discrepancy reporting.
**Response and Submission Details**
- **Solicitation Post Date:** March 23, 2026
- **Offer Due Date:** April 20, 2026 (extended)
- **Submission Platform:** WAWF (Wide Area Work Flow)
- **Notice URL:** [https://sam.gov/opp/90dba9dc813044918c96bccd75ae997b/view](https://sam.gov/opp/90dba9dc813044918c96bccd75ae997b/view)
**Summary for Contractors**
This opportunity is suited for small businesses with demonstrated expertise in manufacturing and certifying high-integrity, large-diameter seamless carbon steel pipe for defense applications. Contractors must have robust quality systems, experience with military standards, and the ability to manage comprehensive traceability and certification processes. The contract’s requirements for configuration control, government inspection, and strict adherence to technical and quality standards will remain constant throughout the contract lifecycle. Interested parties should carefully review all referenced specifications and ensure their capabilities align with the Navy’s critical safety and quality assurance expectations.