TUBE,METALLIC

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QNB35

NAICS

331420 - Copper Rolling, Drawing, Extruding, and Alloying

Classification Code

4710

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (Procurement Identifier: N0010426QNB35) for the supply of a metallic tube, specifically a copper-nickel alloy tube, to be used in a critical shipboard system. This procurement is classified under NAICS code 331420 (Copper Rolling, Drawing, Extruding, and Alloying) and Product Service Code 4710, and is a total small business set-aside, inviting offers exclusively from qualified small business concerns. **Purpose and Scope** The primary objective of this solicitation is to procure seamless, annealed copper-nickel alloy tubing (alloy number 715, 70/30 composition) for use in vital naval shipboard applications. The material is designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured), reflecting its criticality: any failure or defect could result in severe personnel injury, loss of life, or catastrophic shipboard system failure. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the highest standards of material integrity and performance. **Key Requirements and Deliverables** - **Material Specifications:** The tube must conform to MIL-T-16420, with specific requirements for composition (70/30 copper-nickel), temper (annealed), type (seamless), class (6000 Special), and grade (2). The outside diameter for nonstandard size tubing is specified as 0.250 inch, with a minimum wall thickness of 0.065 inch. Tubing must be supplied in mill lengths unless otherwise specified. - **Testing and Certification:** Each tube must undergo a hydrostatic pressure test at 9,000 PSI (minimum and maximum) for at least five minutes, with certifications required for both hydrostatic and ultrasonic inspections. All material must be accompanied by a Certificate of Compliance, referencing all applicable specifications and test results, and must be traceable to the material’s unique heat/lot number. - **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. The quality system and all related procedures are subject to government review and audit. Suppliers of Level I/SUBSAFE material must submit their quality system procedures to the Procurement Contracting Officer (PCO) prior to award unless already on file. - **Traceability and Marking:** Permanent and temporary traceability markings are required on each tube, ensuring direct linkage to certification data. Marking methods must comply with MIL-STD-792 and other referenced standards, with strict controls to prevent commingling of materials. - **Packaging and Handling:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements. The maximum gross weight of containers and other packaging details are specified elsewhere in the contract. - **Inspection and Acceptance:** Inspection and acceptance will be performed at destination, with government quality assurance rights at both contractor and subcontractor facilities. No material may be shipped prior to receipt of acceptance, and all certification data must be submitted via Wide Area Workflow (WAWF) for review by Portsmouth Naval Shipyard. - **Subcontractor Controls:** The prime contractor is responsible for ensuring all sub-tier suppliers meet the same quality and traceability requirements, with periodic audits and documented supplier selection criteria. - **Configuration Control:** Contractors must maintain configuration control and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), Department of the Navy, Department of Defense - **Primary Contact:** Jocelyne Dzonangfouego, Telephone: 717-605-2982, Email: [email protected] - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/9ad5d42d71084d3da81a169390f2cb89/view) **Procurement Type and Special Considerations** This is a fixed-price solicitation issued under Emergency Acquisition Flexibilities (EAF), with a bilateral award process requiring written contractor acceptance. The contract will be a rated order certified for national defense under the Defense Priorities and Allocations System (DPAS), with a priority rating of "DO." All contractual documents may be issued electronically, and the government’s acceptance of the contractor’s proposal constitutes bilateral agreement. **Set-Aside and Evaluation** The solicitation is a total small business set-aside. Award will be made based on the lowest aggregate total price for the total quantity required, provided all technical and quality requirements are met. **Constant Elements Over Contract Lifecycle** Throughout the contract, the following elements will remain constant: - The requirement for strict adherence to material, testing, and certification standards - The necessity for robust quality assurance and traceability systems - The obligation to submit all required documentation and certifications prior to shipment and acceptance - The government’s right to inspect and audit contractor and subcontractor facilities and records - The requirement for configuration control and formal approval of any waivers, deviations, or engineering changes **Summary for Contractors** This opportunity is suited for small businesses with proven capabilities in manufacturing, testing, and certifying high-integrity copper-nickel alloy tubing for critical defense applications. Contractors must demonstrate robust quality management systems, experience with Level I/SUBSAFE material controls, and the ability to comply with detailed traceability, marking, and certification requirements. The contract’s critical safety designation and DPAS rating underscore the importance of reliability, documentation, and timely performance. Interested parties should review the full solicitation and referenced specifications, ensure their quality and traceability systems are compliant, and prepare to submit all required documentation via WAWF. For technical questions or to request access to drawings, contractors should contact the POC listed above. **Response Deadline:** Offers are due by April 16, 2026. For further details and to access the solicitation, visit the [SAM.gov opportunity page](https://sam.gov/opp/9ad5d42d71084d3da81a169390f2cb89/view).