NUT
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFC45
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4730
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation (Procurement Identifier: N0010426QFC45) for the manufacture and supply of a specialized nut, designated as MIL-DTL-24231, part number M24231/11-031. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4730, reflecting its critical role in shipboard systems.
**Purpose and Scope**
The material covered by this contract is intended for use in a crucial shipboard system, where the integrity and reliability of components are paramount. The nut is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), meaning that incorrect or defective material could result in catastrophic failure, serious personnel injury, loss of life, or loss of vital shipboard systems. As such, the procurement invokes stringent control procedures to ensure the receipt of correct, fully compliant material.
**Key Requirements and Objectives**
Contractors are required to manufacture the nut strictly in accordance with MIL-DTL-24231, part number M24231/11-031, with specific material requirements: QQ-N-286, Form 2, Annealed and Age Hardened, meeting mechanical properties as outlined in MIL-DTL-24231, paragraph 3.3.2. Weld repair is not permitted on QQ-N-286 material.
Certifications are required for:
- Quantitative chemical and mechanical analysis of the material.
- Ultrasonic inspection of starting material (for items with diameter or minimum distance between parallel surfaces of 4 inches or greater, or as specified).
- Dye penetrant inspection (per paragraph 4.5.9 of MIL-DTL-24231, with acceptance criteria of no cracks).
Heat treatment and thread formation requirements are detailed, including solution annealing and age hardening for fasteners, and strict inspection protocols for threads per FED-STD-H28 or ASME B1 series. Internal threads must be formed by cutting; cold forming is not acceptable.
Testing for slow strain rate tensile properties must be performed by approved laboratories, including Huntington Alloys, Metallurgical Consultants, Naval Surface Warfare Center Carderock Division, Teledyne Allvac, Westmoreland Mechanical Testing, Mannesmann Rohrenwerke, and ThyssenKrupp VDM USA, Inc.
**Quality Assurance and Certification**
A robust quality system is required, compliant with ISO-9001, ISO-10012, ANSI-Z540.3, and ISO-17025, or MIL-I-45208 with MIL-STD-45662 calibration requirements. The contractor’s quality system and products are subject to government evaluation, verification, inspection, and acceptance. Suppliers of Level I/SUBSAFE material must submit documented quality system procedures to the Procurement Contracting Officer (PCO) prior to award, unless already on file.
Traceability and certification requirements are extensive. Material must be traceable from the raw stock through all process operations to the finished component, with unique traceability markings linked to certification test reports. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, via Wide Area Work Flow (WAWF). No material may be shipped prior to receipt of acceptance.
Electronic signatures are permitted for certification documents, provided they are controlled and unique to the individual signing. Certification statements must be positive and unqualified; disclaimers are not acceptable.
**Inspection and Acceptance**
Government Quality Assurance will be performed at source, and the place of performance may not be changed without authorization. Inspection records must be maintained and traceable to the material inspected. Subcontractor inspection requirements are also specified, with the government reserving the right to inspect supplies or services not manufactured within the contractor’s facility.
Final inspection includes material sampling for form, fit, and function, with lot acceptance based on zero defects. All data concerning material verification, traceability, and nondestructive test certifications must be 100% inspected.
**Packaging and Marking**
Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and the contract schedule. Fasteners must be marked with a material symbol/designator as specified.
**Contracting Entity and Contact Information**
- Contracting Entity: NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS)
- Department: Department of Defense, Department of the Navy
- Primary Contact: Alana M. Boyer, Telephone: 717-605-1234, Email: [email protected]
- Notice URL: [SAM.gov Opportunity](https://sam.gov/opp/b0a45c17ffe84bf1af37b3facfa17028/view)
**Procurement Type and Special Considerations**
This is a fixed-price solicitation. The order is "DO" rated under the Defense Priorities and Allocations System (DPAS), certified for national defense use, and issued pursuant to Emergency Acquisition Flexibilities (EAF). The procurement was initially set aside for small business, but the set-aside has been dissolved via amendment. Security prohibitions and exclusions apply per class deviation 2026-O0025.
**Relevant Documentation and Standards**
Applicable documents include federal and military standards and specifications (FED-STD-H28, ANSI/ASQ Z1.4, QQ-N-286, MIL-STD-792, MIL-DTL-1222, MIL-STD-2132, ISO 9001, ISO 10012, ISO/IEC 17025, MIL-I-45208, MIL-STD-45662, ANSI/NCSL Z540.3, T9074-AS-GIB-010/271, MIL-DTL-24231), with ordering information provided in the solicitation.
**Constant Elements Over Contract Lifecycle**
Throughout the contract lifecycle, the following elements remain constant:
- The requirement for strict compliance with material, manufacturing, and certification standards.
- The necessity for traceability and robust quality assurance.
- The obligation to submit certification data for review and acceptance prior to shipment.
- The prohibition of mercury and mercury-containing compounds.
- The requirement for government source inspection and acceptance.
- The use of WAWF for certification and payment processing.
- The maintenance of configuration control and the submission of engineering change proposals for any modifications.
**Summary for Contractors**
This opportunity is highly specialized and demands rigorous adherence to technical, quality, and certification requirements. Contractors must possess proven capabilities in manufacturing high-integrity metal components for critical shipboard applications, maintain advanced quality systems, and demonstrate experience with traceability and certification protocols. The contract is suitable for organizations with established processes for compliance with military standards, government inspection, and electronic data submission. Interested parties should review the full solicitation and ensure alignment with all requirements before responding.
For further information or to submit a response, contact Alana M. Boyer at the details provided above. The solicitation remains active, with a response deadline of May 27, 2026.