59--CABINET,ASSEMBLY, IN REPAIR/MODIFICATION OF

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0038326QPA83

NAICS

334412 - Bare Printed Circuit Board Manufacturing

Classification Code

5998

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
Documents1
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support, has issued a solicitation (Procurement Identifier: N0038326QPA83) for the repair and modification of a Cabinet Assembly, specifically identified as NIIN 016718115, Part Number 2056AS4000-G01, under Product Service Code 5998 (Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware). This procurement is classified under NAICS Code 334412, Bare Printed Circuit Board Manufacturing. **Purpose and Scope** The primary objective of this solicitation is to secure qualified contractor services for the comprehensive repair, overhaul, and recertification of a critical Cabinet Assembly used in shipboard systems that enable the launch and recovery of aircraft. The material is designated as a Critical Safety Item (CSI), reflecting its essential role in mission-critical operations and the potential for severe consequences in the event of failure, including personnel injury, loss of life, or loss of vital shipboard systems and aircraft. The scope of work encompasses the disassembly, inspection, repair or replacement of defective components, reassembly, and rigorous testing to restore the Cabinet Assembly to a Ready for Issue (RFI) condition. All work must be performed in strict accordance with the latest revisions of applicable technical drawings, specifications, and the Statement of Work (SOW) provided by the Navy. The contractor is responsible for all labor, materials, parts, and specialized tooling or test equipment required for the repair process, as no Government Furnished Property will be provided. **Key Requirements and Deliverables** - **Repair Turnaround Time (RTAT):** The contractor must complete repairs and obtain final Government inspection and acceptance within 271 days of asset receipt, as tracked in the Commercial Asset Visibility (CAV) system. Early and incremental deliveries are accepted and preferred. - **Throughput Constraint:** Contractors must specify their monthly repair capacity for the NSN; a throughput of “no constraint” is acceptable if applicable. - **Induction Expiration:** Assets must be received for repair within 365 days of contract award; late assets require bilateral agreement for induction. - **Quality Assurance:** The contractor must maintain a quality system compliant with ISO 9001 or SAE AS9100 and a calibration system per ANSI/NCSL Z540.3 or equivalent. All repairs are subject to Government inspection and acceptance, with NAWCAD Lakehurst (NAWCADLKE) providing technical assistance and optional QA surveillance. - **Critical Safety Item Controls:** Special procedures are invoked for CSI material, including certification and marking with a Material Identification Code (MIC) as directed by NAWCADLKE QA. All records related to CSI/CAI manufacture, inspection, and test must be maintained for seven years and provided to the ALRE Cognizant Technical Authority. - **Inspection and Testing:** The contractor must support both interim and final inspections, providing adequate facilities, equipment, and skilled personnel. All critical and major features must be inspected and documented 100%, with specific requirements for plating, hardness, and non-destructive testing (NDT). NDT must be performed by accredited laboratories. - **Configuration Management:** The contractor must maintain a configuration management plan per NAVSUP WSS requirements and obtain approval for any changes to repair procedures, drawings, specifications, or repair sources. - **Parts and Materials:** All parts and materials must be new and conform to the latest approved drawings and specifications unless otherwise authorized in writing by the Procuring Contracting Officer (PCO). Cannibalization is not permitted without explicit approval. - **Documentation:** Contractors must submit data covering all parts, components, and assemblies, including material certifications and process data for new or replaced CSI/CAI components. Overhaul procedures beyond the existing approved process require NAVAIR approval prior to commencement. **Contracting Entity and Contact Information** - **Contracting Entity:** NAVSUP Weapon Systems Support, Department of the Navy, Department of Defense - **Location:** Not specified in the notice; work is to be performed at the contractor’s facility. - **Primary Contact:** Brian J. Emde, Telephone: 215-697-4313, Email: [email protected] **Procurement Type and Special Considerations** This is a competitive solicitation for repair services, with source approval required by the Naval Air Systems Command (NAVAIR). Only companies with approved source status or those who submit and receive source approval as outlined in the solicitation will be eligible for award. The procurement is not identified as a set-aside for small business or other socioeconomic programs. The contract will be governed by a range of standard and specialized clauses, including those related to the Buy American Act, Free Trade Agreements, warranty provisions (12 months or 60 days after discovery of defect), and security prohibitions. All contractual documents may be issued electronically, and the Government’s acceptance of the contractor’s proposal constitutes bilateral agreement. **Constant Elements Over Contract Lifecycle** - The requirement for strict adherence to technical specifications, quality assurance, and configuration management will remain throughout the contract. - The critical safety designation and associated controls, including certification, marking, and recordkeeping, are enduring requirements. - The contractor’s responsibility for all materials, parts, and specialized equipment, as well as compliance with all inspection and documentation protocols, will persist for the duration of the contract. **Summary for Contractors** This opportunity is suited for contractors with demonstrated experience in the repair and overhaul of complex, mission-critical electronic assemblies for defense applications, robust quality management systems, and the ability to comply with stringent configuration and safety controls. Contractors must be prepared to support detailed inspection and certification processes, maintain comprehensive records, and coordinate closely with Navy technical and quality authorities. Only source-approved entities or those able to obtain such approval will be considered for award. Interested parties should review the full solicitation and submit their proposals via email to the designated contact by the specified due date. For further details and access to attachments, refer to the official notice at [SAM.gov](https://sam.gov/opp/8cea8f4f891449c7bb611a5b8939ae81/view).