52000QR260003271 USCGC WILLIAM CHADWICK HULL INSPECTION

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

SFLC PROCUREMENT BRANCH 1(00080)

Contract Value

Not provided

Codes & Classification
Solicitation Number

52000QR260003271

NAICS

336611 - Ship Building and Repairing

Classification Code

J020

Additional Details
Set Aside

SBA

Place of Performance

Boston, Massachusetts, UNITED STATES

SourceSAM
Documents2
The United States Coast Guard (USCG), through its Surface Force Logistics Center (SFLC) Procurement Branch 1, is soliciting quotations from qualified small business contractors for the hull inspection and maintenance of the USCGC WILLIAM CHADWICK. This procurement, identified by Request for Quote (RFQ) number 52000QR260003271, is a combined synopsis/solicitation for commercial services, processed in accordance with FAR Part 12 and utilizing simplified acquisition procedures under FAR Part 13. The opportunity is set aside exclusively for small businesses under NAICS code 336611 (Ship Building and Repairing). **Purpose and Scope** The primary objective of this contract is to ensure the operational integrity and longevity of the USCGC WILLIAM CHADWICK by performing a thorough cleaning and inspection of the vessel’s underwater (U/W) body, as well as renewing bolt-on zinc anodes. All work will be conducted while the vessel is moored pier side at 427 Commercial Street, Boston, Massachusetts (MA 02109), during the cutter’s scheduled availability from March 16, 2026, to April 5, 2026. **Key Requirements and Deliverables** Contractors are required to: - Clean all U/W body surfaces, removing marine growth, debris, and other contaminants in accordance with USCG Maintenance Procedure Card B10015.D. Care must be taken to avoid damage to existing coatings or non-coated surfaces, and transducer surfaces must be cleaned using only hand-held brushes. - Inspect the hull and related components, including bow thruster, propellers, rudders, transducers, and any heavily fouled areas. - Polish propellers and, if necessary, remove and replace sea chest grating to access and clean sea chest suction. - Renew government-furnished zinc anodes and associated hardware, as specified in the solicitation, following Maintenance Procedure Card B10018.D. Some anodes may require minor modifications for proper fit. - Provide video highlights of underwater body surfaces before and after cleaning as part of the deliverable package. - Furnish and install protective coverings to safeguard non-affected vessel components, equipment, and spaces from contamination during work, and restore all areas to their original condition upon completion. - Handle all interferences in accordance with SFLC Standard Specification 0000, paragraph 3.3.5. The government will supply specific components (anodes, nuts, screws, etc.) as detailed in the solicitation, and contractors must utilize these items in the renewal process. **References and Standards** Work must adhere to relevant Coast Guard drawings and publications, including: - Coast Guard Drawings (Shell Expansion, Skegs and Stern Tubes, Rudder Details, Fin Stabilizer System, Bow Thruster System, Docking Plan) - SFLC Standard Specification 0000 (General Requirements) - Maintenance Procedure Cards B10015.D and B10018.D **Contracting Entity and Contact Information** The procurement is managed by SFLC PROCUREMENT BRANCH 1 (Entity Key: 100181484), a federal office under the Department of Homeland Security, US Coast Guard. Primary and secondary points of contact are: - Timothy Ford ([email protected]) - Joshua Miller ([email protected], 757-628-4801) **Procurement Details and Submission Requirements** - This is a total small business set-aside under NAICS 336611. - The contract will be awarded as a firm-fixed price purchase order, with evaluation based on best value, considering specification, price, past performance, and quality. - Contractors must be registered in SAM.gov and provide their Unique Entity ID (UEI) and Cage Code. - Quotations must include a detailed cost breakdown, unit and extended prices, total price, payment terms, any prompt payment discounts, and warranty information. - Quotes must be submitted on company letterhead and received no later than March 6, 2026, at 9:00 AM Eastern Standard Time via email to the contacts listed above. - The government reserves the right to award on an “all or none” basis. **Applicable Clauses and Provisions** The solicitation incorporates numerous FAR clauses and provisions, including but not limited to: - FAR 52.212-1 through 52.212-5 (Instructions, Evaluation, Representations, Contract Terms) - FAR 52.204-7 (System for Award Management) - FAR 52.222-3, 52.222-19, 52.222-35, 52.222-36, 52.222-37, 52.222-50, 52.225-1, 52.225-13, 52.232-33, 52.233-3, 52.233-4 - Additional clauses as specified in the attached FAR Clause Matrix **Constant Elements Throughout Contract Lifecycle** - The place of performance is Boston, Massachusetts. - The contract is governed by federal acquisition regulations and Coast Guard standards. - The requirement is for cleaning, inspection, and renewal of underwater hull components, with government-furnished materials. - The procurement is set aside for small businesses and will be awarded as a firm-fixed price contract. - All communications and submissions must be directed to the designated contracting officers. **Summary** This opportunity is ideal for small business contractors specializing in ship building and repair, particularly those with experience in underwater hull maintenance and zinc anode renewal. The contract requires strict adherence to Coast Guard specifications, comprehensive documentation (including video evidence), and careful handling of government-furnished materials. Interested parties should ensure compliance with all submission requirements and federal regulations, and direct any questions to the listed contacts. For full details and attachments, refer to the official notice at https://sam.gov/opp/eea91d198c964702b7caa7c717faf5ce/view.