VALVE,GLOBE
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QZA43
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (Procurement Identifier: N0010426QZA43) for the manufacture and delivery of a specialized shipboard component: the Globe In-Line Stop Valve, in accordance with NAVSHIPS Drawing 803-2177934 Assembly No. 803-2177934-C311AF. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, and is set aside exclusively for small business participation.
**Purpose and Scope**
The primary objective of this procurement is to acquire 80 units of a complete Globe In-Line Stop Valve, a critical component designated as "Special Emphasis Material" (Level I, Scope of Certification, or Quality Assured) for use in vital shipboard systems. The integrity of these valves is paramount, as any failure or defect could result in severe personnel injury, loss of life, or catastrophic failure of shipboard systems, including the potential loss of the ship itself. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the highest standards of safety and reliability.
**Key Requirements and Deliverables**
Contractors are required to manufacture the valves strictly in accordance with the referenced NAVSHIPS drawing and associated specifications, with certain modifications and amplifications detailed in the solicitation. The scope of work includes:
- **Material and Certification:** All critical parts (body, bonnet, bonnet ring, stem, disk) must be fabricated from specified alloys (e.g., MIL-C-24679 Alloy C71500, QQ-N-281, ASTM-B564, ASTM-B164) with full quantitative chemical and mechanical analysis. Certifications for pressure and non-destructive tests are mandatory.
- **First Article Testing (FAT):** The contract requires First Article Approval through contractor testing, including non-destructive inspection of one unit, to be conducted in accordance with General Note 7 of Drawing 803-2177934. The FAT must be completed within 30 days, with results submitted for government review and acceptance prior to full production.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. Government Quality Assurance at source is required, and the contractor’s quality system is subject to audit and approval.
- **Traceability:** Full traceability from raw material to finished product is required, with unique traceability markings maintained throughout all processing steps, including subcontracted operations. Certification data must be submitted and approved prior to shipment.
- **Welding and Brazing:** All welding, brazing, and allied processes must comply with NAVSEA standards (S9074-AR-GIB-010A/278, 0900-LP-001-7000, S9074-AQ-GIB-010/248). Procedures and qualification data must be submitted and approved before any such work is performed.
- **Inspection and Acceptance:** All threads must be cut (not cold-formed) and inspected per FED-STD-H28 or ASME B1 series. O-ring grooves and sealing surfaces must meet General Acceptance Criteria (GAC) unless otherwise specified. Final inspection includes 100% verification of material properties, traceability, and certification completeness.
- **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements.
- **Documentation:** Certificates of Compliance, test certifications, and all required objective quality evidence (OQE) must be submitted via Wide Area Workflow (WAWF) and accepted by Portsmouth Naval Shipyard prior to shipment. No material may be shipped without formal acceptance.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), Department of the Navy, Department of Defense
- **Primary Contact:** Robert H. Langel, Email: [email protected], Telephone: 717-605-3353
- **Submission and Acceptance:** Certification data and notifications must be sent to [email protected]
**Procurement Type and Special Considerations**
This is a fixed-price solicitation issued under Emergency Acquisition Flexibilities (EAF) and is a DO-rated order under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense and emergency preparedness. The procurement is a total small business set-aside, and all contractual documents will be issued bilaterally, requiring written contractor acceptance. Past performance will be considered in the evaluation of offers.
**Additional Considerations**
- Access to technical drawings must be requested via SAM.gov, with follow-up notification to the listed point of contact.
- All waivers, deviations, and engineering change proposals (ECPs) must be submitted for government approval.
- Mercury and mercury-containing compounds are strictly prohibited.
- Subcontractor quality and inspection requirements must be flowed down and enforced by the prime contractor.
- The contract includes detailed requirements for material handling, discrepancy reporting, and final inspection protocols.
**Constant Elements Throughout Contract Lifecycle**
The criticality of the valve as a Level I/SUBSAFE item, the requirement for rigorous quality assurance and traceability, the necessity for government source inspection and acceptance, and the prohibition of mercury will remain unchanged throughout the contract. The contractor’s obligation to maintain configuration control, submit all required documentation, and comply with all referenced specifications and standards is also constant.
**Summary**
This solicitation represents a highly controlled and technically demanding procurement for the U.S. Navy, requiring contractors with proven capabilities in precision metal valve manufacturing, robust quality systems, and experience with Level I/SUBSAFE or similarly critical shipboard components. Interested small businesses must be prepared to meet all technical, quality, and documentation requirements, and should carefully review the referenced drawings and specifications prior to proposal submission.
For further details and to access solicitation documents, contractors should refer to the official notice at [SAM.gov Opportunity ID 2e216b4433fd4b60b73aad5118618683](https://sam.gov/opp/2e216b4433fd4b60b73aad5118618683/view).