COUPLING,VALVE STEM
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFC06
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4730
Additional Details
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support office in Mechanicsburg, PA, has issued a solicitation (Procurement Identifier: N0010426QFC06) for the supply of a "COUPLING, VALVE STEM." This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4730, indicating its focus on specialized metal components for shipboard systems.
**Purpose and Scope**
The primary objective of this solicitation is to acquire a Coupling Set, comprising specific pieces (8, 9, 93, and 181), for use in a critical shipboard system. The application of this material is of such importance that any deviation, defect, or nonconformance could result in catastrophic consequences, including personnel injury, loss of life, or loss of vital shipboard systems. As such, the material is designated as "SPECIAL EMPHASIS" (Level I, Scope of Certification, or Quality Assured), invoking stringent control and certification procedures to ensure the highest level of quality and traceability.
**Key Requirements and Deliverables**
Contractors are required to manufacture and deliver the Coupling Set in strict accordance with detailed Naval Sea Systems Command drawings (803-4384539, 803-4384678, and DRN 4384678C01), as well as a comprehensive list of referenced federal, military, and industry standards. The solicitation specifies exact material compositions, mechanical properties, and required certifications for each component:
- **Male and Female Half Couplings (Pieces 8 and 9):** Must be manufactured from forged ASTM-B283 or ASTM-B150, Alloy C63200, Temper TQ50, meeting defined tensile and yield strengths and elongation requirements.
- **Self-Locking Nut (Piece 93):** Must conform to QQ-N-281, Class B, with a self-locking element per ASTM-D4066.
- **Socket Head Cap Screw (Piece 181):** Must be produced from MIL-DTL-1222, Type II, QQ-N-286, annealed and age-hardened.
A range of non-destructive and conformance tests are required, including liquid and dye penetrant inspections, ultrasonic inspections, and wedge tensile tests, with certifications to be provided for each. Only laboratories specifically listed in the solicitation are authorized to perform certain critical tests (e.g., Slow Strain Rate Tensile Test of QQ-N-286).
**Quality Assurance and Traceability**
The contract mandates a robust quality system, compliant with ISO 9001 (or MIL-I-45208 as an alternate), and calibration systems per ISO 10012 or ANSI-Z540.3 with ISO-17025. Contractors must maintain comprehensive inspection records, ensure traceability from raw material to finished product, and provide certificates of compliance and test certifications with each shipment. All fasteners must be marked for traceability, and special requirements apply to the marking, handling, and segregation of materials.
Government Quality Assurance (GQA) at the source is required, and the contractor must coordinate with the Defense Contract Management Agency (DCMA) or the appropriate government representative for inspection and acceptance. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support, Mechanicsburg, PA
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Scott R. Youngblood, Telephone: 717-605-2379, Email: [email protected]
**Procurement Type and Set-Aside**
This is a fixed-price solicitation and is a total small business set-aside, as indicated by the inclusion of the "Notice of Total Small Business Set-Aside" clause. Only qualified small businesses are eligible to respond.
**Special Considerations**
- The contract is a DO-rated order under the Defense Priorities and Allocations System (DPAS), signifying its importance for national defense.
- All applicable documentation, drawings, and specifications must be obtained and adhered to; access to controlled drawings requires a request via the SAM.gov solicitation page and coordination with the primary POC.
- Mercury and mercury-containing compounds are strictly prohibited.
- Any waivers, deviations, or engineering changes must be formally submitted and approved by the Contracting Officer.
- The contract includes detailed requirements for packaging, marking, and the handling of government-furnished material.
**Constant Elements Over Contract Lifecycle**
Throughout the contract, the following elements remain constant:
- The requirement for strict adherence to all referenced specifications and drawings.
- The necessity for comprehensive traceability and certification of all materials and processes.
- The obligation to maintain and provide a robust quality assurance system and documentation.
- The need for government source inspection and acceptance prior to shipment.
- The prohibition of mercury and the requirement for special handling and marking of all materials.
**Summary for Contractors**
This opportunity is suited for small businesses with demonstrated expertise in precision manufacturing of metal valve and pipe fittings for critical defense applications, robust quality assurance systems, and the ability to comply with extensive certification, traceability, and government inspection requirements. Contractors must be prepared to manage complex documentation, maintain configuration control, and coordinate closely with government quality representatives throughout the contract lifecycle.
Interested parties should review the full solicitation and referenced documents, and direct any questions or requests for drawing access to the primary contact. The response deadline is March 24, 2026.
For more information and to access the solicitation, visit: [SAM.gov Opportunity](https://sam.gov/opp/5c325ed6fcf2411b908dccb691bf0ec4/view).