ADAPTER,STRAIGHT,PI

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFB18

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4730

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
Documents1
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support office in Mechanicsburg, PA, has issued a solicitation (Procurement Identifier: N0010426QFB18) for the supply of a straight adapter fitting, classified under Product Service Code 4730 (Hose, Pipe, Tube, Lubrication, and Railing Fittings) and NAICS Code 332919 (Other Metal Valve and Pipe Fitting Manufacturing). This procurement is critical to the operational integrity of shipboard systems and is designated as SPECIAL EMPHASIS material, reflecting its importance to personnel safety and mission assurance. **Purpose and Scope** The primary objective of this solicitation is to procure adapters that will be used in crucial shipboard systems where the failure of supplied material could result in severe consequences, including personnel injury, loss of life, or loss of vital shipboard systems. As such, the procurement is governed by stringent quality assurance, traceability, and certification requirements to ensure only fully compliant and qualified products are delivered. **Key Requirements and Deliverables** - **Qualified Product List (QPL) Item:** Only items that have been tested and approved in accordance with the qualification requirements of the referenced specifications will be considered. The adapter must meet the requirements of MIL-F-24787, with additional requirements as specified in the solicitation. - **Material and Design:** The adapter must be manufactured using specified materials (e.g., QQ-N-281, QQ-N-286, ASTM-A494, MIL-C-24723) and must be compatible with MIL-H-24135/2 hoses. All internal threads must be cut, not cold-formed, and must be inspected per FED-STD-H28 or ASME B1 series. - **Testing and Certification:** Comprehensive certification is required for chemical and mechanical properties, ultrasonic inspection, non-destructive testing, and age hardening, as applicable. Only certain laboratories are authorized to perform specific tests (e.g., slow strain rate tensile tests for QQ-N-286 material). - **Traceability:** Full traceability from raw material to finished product is mandatory. Certification data must be linked to unique traceability markings on each item, and all records must be maintained and available for government review. - **Quality System:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. The system and procedures are subject to government audit and approval. - **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements. - **Government Source Inspection:** Inspection and acceptance will be performed at the source, and no material may be shipped prior to government acceptance. - **Configuration Control:** Contractors must maintain configuration control and submit any waivers, deviations, or engineering change proposals for government approval. - **Mercury-Free Requirement:** No mercury or mercury-containing compounds may be used or come into contact with the supplied hardware. - **Warranty:** A one-year warranty from the date of delivery is required. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support (WSS) Mechanicsburg - **Department:** Department of Defense, Department of the Navy - **Primary Contact:** Benjamin Spangler, Phone: 771-229-0573, Email: [email protected] - **Submission and Acceptance:** Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system. **Procurement Type and Special Considerations** - **Procurement Method:** Solicitation (active as of 06/05/2026) - **Set-Aside Status:** This requirement is NOT a small business set-aside; it is a QPL item open to all qualified sources. - **DPAS Rating:** Any contract awarded will be a "DO" rated order under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense. - **Emergency Acquisition Flexibilities:** The order is issued under Emergency Acquisition Flexibilities (EAF). - **Evaluation Criteria:** Past performance will be considered in accordance with FAR 13.106(a)(2) and DFARS 252.213-7000. **Applicable Standards and Documentation** The solicitation references a comprehensive list of federal, military, and industry standards (e.g., FED-STD-H28, ANSI/ASQ Z1.4, MIL-STD-792, ISO 9001, MIL-F-24787, QPL 24135, QPL 24787, etc.), which contractors must obtain and comply with. The order of precedence is established, with the contract text taking priority over referenced documents in case of conflict. **Submission Details** - **Response Deadline:** August 5, 2026, 20:05 - **Notice URL:** [https://sam.gov/opp/67314e4b2b094d54b37300f9bc7299fc/view](https://sam.gov/opp/67314e4b2b094d54b37300f9bc7299fc) **Summary for Contractors** This opportunity is suited for manufacturers with proven experience in producing high-reliability, QPL-listed metal pipe and hose fittings for defense applications. Contractors must demonstrate robust quality assurance, traceability, and configuration management systems, and be prepared to comply with rigorous testing, certification, and government inspection requirements. The contract’s critical safety designation and DPAS rating underscore the importance of timely, compliant delivery. Interested parties should review all referenced specifications and ensure their processes and documentation meet the Navy’s stringent standards before submitting an offer. For further information or to submit questions, contractors should contact Benjamin Spangler at the details provided above.