31--BEARING, SPR LINK

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFB95

NAICS

332991 - Ball and Roller Bearing Manufacturing

Classification Code

3120

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
Documents1
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QFB95) for the manufacture and supply of a Bearing, Spring Link (BEARING, SPR LINK), classified under Product Service Code 3120 (Bearings, Plain, Unmounted) and NAICS Code 332991 (Ball and Roller Bearing Manufacturing). This procurement is critical to the operational integrity of shipboard systems, as the specified bearing is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured). The use of incorrect or defective material could result in catastrophic failure, including serious personnel injury, loss of life, or loss of vital shipboard systems. The scope of this procurement requires the contractor to manufacture the Bearing, Spring Link in strict accordance with NAVSEA drawing 7106789, item 216, and Engineering Report H547-0253A83, with all requirements and modifications as specified in the solicitation. Kamatics, per Note 7004 of the referenced NAVSEA drawing, is the approved source of supply, and Kamatics drawing no. KJB911500F is provided for reference only. The bearing contains non-metallic materials, which must meet the toxicity and flammability requirements of NAVSEA SS800-AG-MAN-010/P-9290. No substitutions of material are permitted without special engineering approval and, if necessary, additional testing. Key requirements include: - **Quality Assurance and Certification:** The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3 with ISO-17025. The contractor’s quality system and products are subject to government evaluation, verification, and inspection. Government Quality Assurance (GQA) will be performed at the source, and any changes to the place of performance require prior authorization from the Procurement Contracting Officer (PCO). - **Traceability and Objective Quality Evidence (OQE):** Full traceability from material to OQE is mandatory. Traceability markings must be permanently applied to the material or affixed via tag, and all OQE must be 100% inspected for completeness and legibility. Certification documentation must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, via the Wide Area Work Flow (WAWF) system. - **Inspection and Testing:** The contractor must perform final inspection for form, fit, and function, with lot acceptance based on zero defects. Sampling plans must follow applicable military or federal standards, or ANSI/ASQ-Z1.4 if not otherwise specified. Statistical Process Control (SPC) may be used, but government acceptance will follow attribute sampling plans. - **Configuration Control:** The contractor is responsible for maintaining the equipment baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. All waivers and deviations require government review and approval. - **Packaging and Marking:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and the contract schedule. - **Warranty:** A one-year warranty is required, effective for 365 days after the last delivery under the contract. - **Compliance with Regulations:** The procurement is subject to Buy American, Free Trade Agreements, and Balance of Payments Program requirements. Mercury and mercury-containing compounds are strictly prohibited. The solicitation includes detailed instructions for the submission of certification data, which must be provided 20 days prior to delivery for review and acceptance by Portsmouth Naval Shipyard. Final delivery of material is required within 210 days. The hour and date for receipt of offers has been extended to 4:30 PM EST on March 24, 2026. The contracting entity is NAVSUP Weapon Systems Support Mechanicsburg, a federal office under the Department of Defense, Department of the Navy. The primary point of contact for this solicitation is Noelle M. Smith, who can be reached at 717-605-3992 or via email at [email protected]. Contractors considering this opportunity should have demonstrated experience in manufacturing critical shipboard components to stringent military specifications, robust quality assurance systems, and the ability to maintain comprehensive traceability and certification records. The requirement for government source inspection, configuration control, and compliance with special emphasis material protocols underscores the need for mature processes and disciplined execution. This procurement does not specify any set-aside requirements or special socioeconomic considerations. Interested parties can access the full solicitation and any attachments via the official SAM.gov opportunity listing at: https://sam.gov/opp/f91255c540094e7b920fcef4dab1b4f5/view. The notice remains active, with a response deadline of May 5, 2026, at 8:05 PM. This opportunity is well-suited for contractors with established capabilities in high-reliability bearing manufacturing for defense applications, particularly those familiar with NAVSEA drawings, DSSP material controls, and Navy shipboard system requirements.