BELL CRANK
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFB71
NAICS
333613 - Mechanical Power Transmission Equipment Manufacturing
Classification Code
3040
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QFB71) for the manufacture and delivery of a Bell Crank, classified under Product Service Code 3040 (Miscellaneous Power Transmission Equipment) and NAICS Code 333613 (Mechanical Power Transmission Equipment Manufacturing). This procurement is a Total Small Business Set-Aside, inviting qualified small business contractors to participate.
**Purpose and Scope**
The Bell Crank to be procured is a critical component intended for use in a crucial shipboard system. Due to the nature of its application, any failure or defect in this part could result in severe consequences, including personnel injury, loss of life, or catastrophic failure of vital shipboard systems. As such, the Bell Crank is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures to ensure the delivery of correct and fully compliant material.
**Key Requirements and Deliverables**
Contractors are required to manufacture the Bell Crank in strict accordance with Naval Sea Systems Command drawings 751-6402626 and DN6402626A1, with all applicable specifications and modifications as detailed in the solicitation. The primary material specified is QQ-N-286, annealed and age-hardened, with no weld repairs permitted. Comprehensive quantitative chemical and mechanical analysis is mandatory, and certifications for annealing, age hardening, and ultrasonic inspection of starting material are required, particularly for items with a diameter or minimum distance between parallel surfaces of 4 inches or greater.
Testing must be performed by one of several specified laboratories, including Huntington Alloys, Metallurgical Consultants, Naval Surface Warfare Center Carderock, Teledyne Allvac, Westmoreland Mechanical Testing and Research, Mannesmann Rohrenwerke, or ThyssenKrupp VDM USA, Inc. All certifications must be submitted and accepted prior to shipment, and traceability from raw material to finished product must be meticulously maintained and documented.
Contractors must provide a Certificate of Compliance for each shipment, certifying full compliance with all requirements, including traceability, test results, and conformance to all invoked specifications and drawings. The certificate must reference the contract/purchase order, National Stock Number, and include the contractor’s signature.
**Quality Assurance and Control**
A robust quality system is required, compliant with ISO-9001 (or MIL-I-45208), and calibration systems must meet ISO-10012 or ANSI-Z540.3 with ISO-17025 standards. The contractor’s quality system and products are subject to government evaluation, verification, and inspection at source. All inspection and test records must be traceable and available for government review. Subcontractor quality assurance and traceability requirements must be flowed down and enforced throughout the supply chain.
Government Source Inspection (GSI) is required, and the place of performance may not be changed without authorization. The contractor must notify the appropriate government representative or DCMA office upon receipt of the order to coordinate inspection planning.
**Packaging and Delivery**
Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and the contract schedule. Final delivery of material is required within 365 days after the effective date of the contract. No material may be shipped prior to acceptance, and all certification documentation must be submitted via the Wide Area Work Flow (WAWF) system for review and acceptance by Portsmouth Naval Shipyard.
**Contract Administration and Special Considerations**
This solicitation is a fixed-price procurement and is certified as a "DX" rated order under the Defense Priorities and Allocations System (DPAS), indicating its priority for national defense use. The procurement is subject to the Buy American Act, Free Trade Agreements, and Balance of Payments Program requirements. A one-year warranty from the date of delivery is required for all supplies.
All waivers, deviations, and engineering change proposals must be submitted for government approval, with detailed justification and impact analysis. Mercury and mercury-containing compounds are strictly prohibited in the manufacturing process.
**Contracting Entity and Contact Information**
- Contracting Entity: NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH)
- Department: Department of Defense, Department of the Navy
- Primary Contact: Jordan D. Neely, Telephone: 717-605-8197, Email: [email protected]
- Notice URL: [https://sam.gov/opp/83288a62393c4e668d712c4f220ae9af/view](https://sam.gov/opp/83288a62393c4e668d712c4f220ae9af/view)
- Response Due Date: April 17, 2026, 20:04
**Summary for Contractors**
This opportunity is best suited for small businesses with demonstrated experience in manufacturing high-reliability, traceable mechanical components for defense applications, and with robust quality assurance systems in place. The contract’s requirements for material traceability, rigorous testing and certification, and government source inspection reflect the critical safety and operational importance of the Bell Crank in Navy shipboard systems. Contractors must be prepared to comply with all technical, quality, and administrative requirements throughout the contract lifecycle, ensuring full traceability, documentation, and adherence to all specifications and standards.
Interested parties should review the solicitation in detail and ensure they can meet all requirements before submitting a proposal. Access to technical drawings may require additional steps as outlined in the solicitation. All inquiries and requests for access should be directed to the primary contact listed above.