ROD,OPERATING
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFB53
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
Documents1
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (Procurement Identifier: N0010426QFB53) for the manufacture and delivery of an "Operating Rod" to be used in a critical shipboard system. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, indicating its alignment with specialized metal component manufacturing for naval applications.
**Purpose, Scope, and Intended Outcomes**
The primary objective of this procurement is to acquire an Operating Rod that meets stringent technical and quality requirements for use in a vital shipboard system. The criticality of the application is underscored by its designation as "SPECIAL EMPHASIS material" (Level I, Scope of Certification, or Quality Assured), meaning that any failure or defect could result in severe consequences, including personnel injury, loss of life, or catastrophic failure of ship systems. The intended outcome is to ensure the Navy receives a fully compliant, traceable, and high-reliability component that supports the operational integrity and safety of its fleet.
**Key Requirements, Objectives, and Deliverables**
- **Technical Specifications:** The Operating Rod must be manufactured in strict accordance with Naval Sea Systems Command drawing 7068535, item number 62, and associated engineering references (ERH841-0311A2, ERH841-0311A3, ERH841-0311A7, ERH841-311A10, ERH841-0311A12, ERH841-0311A16, and ERH841-0311A45). No weld repair is permitted on QQ-N-286 material.
- **Material and Testing:** The rod must be fabricated from QQ-N-286, form 2, annealed and age-hardened, finish A. Quantitative chemical and mechanical analysis is required, and certifications must be provided for annealing, age hardening, and ultrasonic inspection (for material with a diameter or minimum distance between parallel surfaces of 4 inches or greater, or as otherwise specified).
- **Testing Laboratories:** Slow Strain Rate Tensile Tests must be performed by one of several specified, pre-approved laboratories.
- **Quality Assurance:** The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208), with calibration per ISO-10012 or ANSI-Z540.3 and ISO-17025. The system and products are subject to government evaluation and verification.
- **Traceability and Certification:** Full traceability from raw material to finished product is mandatory, with unique traceability markings and comprehensive certification data. Certificates of compliance and test certifications must be submitted and accepted prior to shipment.
- **Inspection and Acceptance:** Government source inspection is required at the contractor’s facility, and all material must be inspected for form, fit, function, and traceability. Lot acceptance is based on zero defects.
- **Packaging:** Preservation, packaging, and marking must comply with MIL-STD 2073 and contract-specific requirements.
- **Data Deliverables:** Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance via Wide Area Work Flow (WAWF) prior to each shipment.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH)
- **Department/Agency:** Department of Defense, Department of the Navy
- **Primary Contact:** Alana M. Boyer, Email: [email protected], Telephone: 717-605-1234
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/117ce331ae1645d1bd13517f826550e8/view)
**Procurement Type, Set-Aside, and Special Considerations**
- **Procurement Type:** Solicitation for a fixed-price supply contract.
- **Set-Aside:** This is a total small business set-aside, restricting competition to qualified small business concerns.
- **DPAS Rating:** The resulting contract will be a "DO" rated order under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense.
- **Security and Export Controls:** The requirement involves access to NOFORN (Not Releasable to Foreign Nationals) and/or Naval Nuclear Propulsion Information. Contractors must complete a security agreement to access drawings, and all distribution is controlled per Navy regulations.
- **Emergency Acquisition Flexibilities:** The order is issued under Emergency Acquisition Flexibilities (EAF).
- **Past Performance:** NAVSUP WSS will consider past performance in the evaluation of offers.
**Additional Considerations**
- **Amendments:** The solicitation has been amended to extend the closing date to March 27, 2026, due to delays in drawing delivery, and to update DODAAC references.
- **Deliverables Schedule:** Certification data must be submitted at least 20 days prior to scheduled delivery, with final material delivery required within 365 days of contract award.
- **Quality and Compliance:** The contract invokes numerous military and industry standards (e.g., MIL-STD-792, MIL-STD-2132, ISO 9001, ISO 17025) and requires detailed documentation, traceability, and compliance with all invoked specifications and drawings.
- **No Mercury:** Mercury and mercury-containing compounds are strictly prohibited.
**Summary for Contractors**
This opportunity is highly specialized and suitable for small businesses with demonstrated expertise in precision metal manufacturing, particularly for defense and naval applications. Contractors must have robust quality assurance systems, experience with Level I/SUBSAFE material traceability, and the ability to comply with strict certification, inspection, and security requirements. The contract’s critical safety designation, DPAS rating, and NOFORN controls underscore the importance of compliance and reliability throughout the contract lifecycle. Interested parties should review all technical documentation, ensure their quality systems and certifications are current, and be prepared to manage secure data and deliverables in accordance with Navy protocols.
For further information or to request access to controlled drawings, contact Alana M. Boyer at [email protected].