TUBE,PERISCOPE

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFB48

NAICS

336612 - Boat Building

Classification Code

2040

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support office in Mechanicsburg, PA, has issued a solicitation (Procurement Identifier: N0010426QFB48) for the manufacture and delivery of a TUBE, PERISCOPE, a critical component intended for use in vital shipboard systems. This procurement is classified under NAICS code 336612 (Boat Building) and Product Service Code 2040, reflecting its application in marine and naval vessel systems. **Purpose and Scope** The primary objective of this procurement is to acquire a periscope tube that meets stringent technical and quality requirements, as it will be integrated into crucial shipboard systems where failure could result in severe consequences, including personnel injury, loss of life, or catastrophic shipboard system failure. The item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking special control procedures to ensure the delivery of correct and fully compliant material. **Key Requirements and Deliverables** - **Technical Specifications:** The outer tube must conform to Kollmorgen drawing 933F055301, with material requirements specified as CRES per drawing P5611722 and SAE AMS-QQ-S-763, Class 316. All applicable drawings and specifications are referenced and must be strictly adhered to. - **Testing and Certification:** The contract mandates comprehensive testing and certification, including: - Non-destructive testing for weld repairs and production welds. - Intergranular corrosion testing for each outer tube. - Hydrostatic pressure testing, with detailed pressure and time tolerances specified. - **First Article Testing (FAT):** Contractor testing and approval of a first article unit is required, with FAT reports due 180 days after approval of the production lot release, and government approval of FAT reports within 60 days of receipt. - **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternative), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. Government Quality Assurance at source is required, and the contractor’s quality system is subject to government review and audit. - **Traceability and Certification:** Rigorous traceability from raw material to finished product is required, with unique markings and comprehensive certification data. All certifications must be positive, unqualified, and directly traceable to the delivered items. - **Configuration Control:** Contractors must maintain the equipment baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface. - **Welding and Brazing:** All welding and brazing must comply with NAVSEA and applicable military standards, with procedures and personnel qualifications submitted for approval prior to production. - **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements. - **Government Source Inspection:** The government reserves the right to inspect at source, including subcontractor facilities, and all inspection records must be maintained and made available for review. **Contract Administration and Submission Requirements** - **Submission of Certification Data:** All certification documentation must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to shipment, via the Wide Area Work Flow (WAWF) system. No material may be shipped before receipt of acceptance. - **Contract Type and Rating:** This is a fixed-price contract, issued as a "DX" rated order under the Defense Priorities and Allocations System (DPAS), indicating its priority for national defense. - **Set-Aside and Source:** The solicitation was amended to dissolve the small business set-aside and is now a sole source procurement. - **Emergency Acquisition Flexibilities:** The order is issued under Emergency Acquisition Flexibilities (EAF), reflecting the critical and urgent nature of the requirement. - **Evaluation Criteria:** Past performance will be considered in the evaluation of offers, in accordance with FAR and DFARS provisions. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support, Mechanicsburg, PA (Department of the Navy, Department of Defense) - **Primary Contact:** Alana M. Boyer, Email: [email protected], Telephone: 717-605-1234 - **Notice Status:** Active - **Response Deadline:** November 9, 2026 **Special Considerations** - **Critical Safety Item (CSI):** The periscope tube is classified as a Critical Safety Item, with failure modes that could result in catastrophic outcomes. - **Proprietary Drawings and Data:** Access to certain drawings may require request and approval via the SAM.gov solicitation page and coordination with the primary point of contact. - **Mercury-Free Requirement:** No mercury or mercury-containing compounds may be used or come into contact with the supplied hardware. - **Subcontractor Controls:** The prime contractor is responsible for ensuring all subcontracted materials and processes meet the same stringent requirements, including traceability, certification, and government inspection rights. **Summary for Contractors** This opportunity is suited for contractors with demonstrated experience in manufacturing high-reliability, precision marine or naval components, and with robust quality assurance, traceability, and configuration management systems. The contract’s requirements for first article testing, comprehensive certification, and government source inspection underscore the criticality of the item and the need for mature, audited quality systems. Contractors must be prepared to manage detailed documentation, maintain strict material traceability, and comply with all referenced military and industry standards throughout the contract lifecycle. Interested parties should review all referenced drawings and specifications, ensure their quality systems and personnel qualifications are current and compliant, and be prepared for rigorous government oversight and documentation requirements. For further information or to request access to controlled documents, contact the contracting officer at the details provided above. For full solicitation details and updates, refer to the official posting at: https://sam.gov/opp/620333e0c05c4fa88c022ac787c807a4/view