Steel Plates and Beams
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
W2R2 USA ENGR R AND D CTR
Contract Value
Not provided
Codes & Classification
Solicitation Number
W912HZ26Q3424
NAICS
331210 - Iron and Steel Pipe and Tube Manufacturing from Purchased Steel
Classification Code
9640
Additional Details
The U.S. Army Engineer Research and Development Center (ERDC), operating under the Department of Defense and represented by the W2R2 USA ENGR R AND D CTR office, has issued an award notice for the procurement of various steel plates and beams. This procurement activity is classified under NAICS code 331210, which pertains to Iron and Steel Pipe and Tube Manufacturing from Purchased Steel, and is further identified by Product Service Code 9640. The place of performance for this contract is Vicksburg, Mississippi.
The primary objective of this procurement is to acquire a range of steel materials, precisely fabricated to stringent specifications, to support ongoing research, development, or construction activities at the ERDC. The scope of work is divided into several tasks, each with distinct material and dimensional requirements:
- **Task 1** involves the supply of three (3) A572 Grade 50 steel plates, each measuring 40" x 35" x 1.0", and three (3) A36 steel angles (two at 6" x 6" x 0.5" and 20 ft in length, and one at 6" x 6" x 0.5" and 10 ft in length).
- **Task 2** requires the provision of steel plates fabricated from preferred materials such as American Bureau of Shipping (ABS) grades AH36, EH36, or DH36, with A588 Grade A also being acceptable. This includes eight (8) plates at 19' x 8' x 0.25" and fourteen (14) plates at 19' x 3' x 0.25".
- **Task 3** specifies the supply of steel plates made from ASTM A992 or A572 Grade 50, including eighty (80) plates at 15' x 3.375" x 0.1875", fourteen (14) plates at 15' x 4.75" x 0.5", fourteen (14) plates at 15' x 10" x 0.5", one (1) plate at 12' x 8' x 0.375", and three (3) steel beams (W12x22) each at 40 ft in length.
A critical requirement across all tasks is that all plate cutting must result in fully cut-out parts with no ripping, and the finished products must adhere to strict tolerances for straightness, squareness, and flatness, not exceeding 0.125". These specifications underscore the importance of precision fabrication and quality control in the deliverables.
This procurement is set aside for Small Business Administration (SBA) eligible entities, reflecting the government's commitment to supporting small business participation in federal contracting. Interested contractors should ensure they meet the SBA set-aside requirements and are capable of delivering materials that conform to the detailed technical specifications.
The contracting activity is managed by the U.S. Army Corps of Engineers, with primary and secondary points of contact provided for further inquiries: Tam Coronel ([email protected], 601-634-7249) and David Ammermann ([email protected], 217-373-4490).
This opportunity remains active as of the posting date and is accessible via the official SAM.gov portal (Opportunity ID: 5a7e4a289cdc406097263afe0f91e1ab). Contractors with expertise in steel fabrication and supply, particularly those familiar with military or federal quality standards, are encouraged to review the full notice and assess alignment with their capabilities.