PARTS KIT,BALL VALV
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFB27
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
Documents2
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support in Mechanicsburg, PA, has issued a solicitation (N0010426QFB27) for the procurement of a Parts Kit for a 3-inch Ball Valve. This requirement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820 (Valves, Nonpowered), and is designated as a Total Small Business Set-Aside. The solicitation is active and responses are due by April 30, 2026.
**Purpose and Scope**
The primary objective of this procurement is to acquire a Parts Kit for a 3-inch Ball Valve, which is a critical component used in vital shipboard systems. The kit consists of one ball (part number 25) and two matching seats (part number 26), manufactured in accordance with Electric Boat drawing 2641-747 and subject to stringent material, testing, and certification requirements. The use of incorrect or defective material in this application could result in catastrophic failure, including serious personnel injury, loss of life, or loss of shipboard systems. As such, the material is designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured), invoking special control procedures to ensure the highest standards of quality and traceability.
**Key Requirements and Deliverables**
- **Material Specifications:**
- The ball must be manufactured from SAE-AMS-6931 or centrifugally cast 6AL-4V titanium (ASTM-B367, Grade C-5), with mechanical properties as specified in the applicable drawing.
- The seats must be made from DuPont AF DE588 (Teflon-filled Acetal/Delrin), meeting detailed physical and mechanical property requirements, including specific gravity, melting point, tensile strength, impact resistance, compressive stress, water absorption, hardness, Teflon fiber content, and dimensional stability.
- **Testing and Certification:**
- Each ball must undergo a hydrostatic test (30 minutes at 1050 PSI with the stem hole plugged) with no leakage or deformation, or alternatively, a dye penetrant inspection per specified standards.
- Certification data (CDRLs) must be submitted at least 20 days prior to scheduled delivery, with review and acceptance by Portsmouth Naval Shipyard (PNSY) within 18-30 working days.
- All material must be traceable to certification test reports, and traceability markings must be maintained throughout all process operations.
- **Quality Assurance:**
- Only sources with an acceptable Quality Control Manual are eligible for award; the quality system must comply with ISO-9001 (or MIL-I-45208 as an alternate), with calibration per ISO-10012 or ANSI-Z540.3/ISO-17025.
- Government Quality Assurance at source is required, and the contractor’s quality system and facilities are subject to audit.
- Inspection and acceptance will be performed at destination, and all deliverables must be accompanied by certificates of compliance and test certifications referencing applicable standards and acceptance criteria.
- **Configuration and Change Control:**
- The contractor must maintain configuration control and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface.
- All waivers and deviations require review and approval by the Contracting Officer.
- **Packaging and Marking:**
- Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements.
- Special marking and tagging requirements apply to ensure traceability, especially for non-metallic (Teflon) seats.
- **Delivery and Acceptance:**
- Final delivery of material is required within 365 days of contract award.
- Early and incremental deliveries are acceptable at no additional cost.
- No material may be shipped prior to receipt of acceptance from PNSY.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support, Mechanicsburg, PA
- **Department/Agency:** Department of Defense, Department of the Navy
- **Primary Contact:** Jordan D. Neely, Phone: 717-605-8197, Email: [email protected]
- **Submission and Notification:** Certification documentation must be submitted via Wide Area Work Flow (WAWF) with notifications to [email protected].
**Procurement Type and Special Considerations**
- **Set-Aside:** Total Small Business Set-Aside
- **Contract Type:** Fixed-Price
- **DPAS Rating:** DO-rated order, certified for national defense use under the Defense Priorities and Allocations System (DPAS)
- **Emergency Acquisition Flexibilities (EAF):** This requirement is being pursued under EAF provisions.
- **Past Performance:** NAVSUP WSS will consider past performance in the evaluation of offers.
**Constant Elements Over Contract Lifecycle**
- The requirement for strict material traceability, certification, and compliance with all specified standards and drawings will remain constant.
- The need for a robust, auditable quality system and adherence to configuration control and change management procedures is ongoing.
- All deliverables must meet the critical safety and performance requirements due to the application in vital shipboard systems.
- The contract will continue to require government source inspection, detailed documentation, and compliance with all packaging, marking, and delivery instructions.
**Summary for Contractors**
This solicitation represents a highly specialized and controlled procurement for a Parts Kit, Ball Valve, intended for use in critical Navy shipboard systems. Contractors must demonstrate proven capability in manufacturing to exacting military and industry standards, maintain rigorous quality and traceability systems, and be prepared for comprehensive government oversight. Only those with an established, auditable quality control program and experience in Level I/SUBSAFE or similar high-assurance environments should consider responding. The opportunity is well-suited for small businesses with expertise in precision valve component manufacturing, robust documentation practices, and the ability to manage complex certification and compliance requirements.
For further details and to access solicitation documents, visit the official notice at [SAM.gov Opportunity ID 7e9687186b084c36945e1e1f1de0588b](https://sam.gov/opp/7e9687186b084c36945e1e1f1de0588b/view).