STEM,NEEDLE VALVE
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QZA63
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation for the procurement of a STEM, NEEDLE VALVE, classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820. This procurement is designated as a Level One Program requirement and is a Critical Safety Item (CSI), intended for use in a crucial shipboard system where material failure could result in catastrophic consequences, including personnel injury, loss of life, or loss of vital shipboard systems.
**Purpose and Scope**
The primary objective of this solicitation is to acquire STEM, NEEDLE VALVE components that meet stringent quality, traceability, and certification requirements, as specified by NAVSEA drawing 556-7015840, part number 4, and associated specifications. The material, specifically ASTM-B150 Alloy C63200, must be manufactured, tested, and certified to ensure compliance with all applicable standards and to maintain the integrity of shipboard systems.
**Key Requirements and Deliverables**
Contractors must adhere to a comprehensive set of requirements, including:
- **Material Certification and Traceability:** Quantitative chemical and mechanical analysis is required, with traceability maintained from raw material to finished component. Certification data must be uniquely marked and permanently applied to each item, ensuring direct traceability to material properties.
- **Testing and Inspection:** Non-destructive testing certifications are required for weld repairs and production welds. O-ring grooves and sealing surfaces must be inspected per invoked drawings or specifications, with repairs subject to approval if they exceed specified limits.
- **Welding and Brazing:** All welding, brazing, and allied processes must comply with NAVSEA standards (S9074-AR-GIB-010A/278, 0900-LP-001-7000, S9074-AQ-GIB-010/248). Procedures and qualification data must be submitted for review and approval prior to any welding or brazing activities.
- **Quality System:** Contractors must maintain a quality system in accordance with ISO-9001, ISO-10012, ANSI-Z540.3, and ISO-17025, or MIL-I-45208 with MIL-STD-45662 calibration requirements. Quality system documentation must be available for review and audit by the Government.
- **Configuration Control:** Contractors are responsible for maintaining baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters.
- **Certificate of Compliance:** A certificate of compliance must be submitted, certifying that all items furnished comply with the procurement document, specifications, and drawings, and showing traceability to the marking applied on each item.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements.
- **Electronic Data Submission:** Certification documentation must be submitted via Wide Area Work Flow (WAWF) and reviewed by Portsmouth Naval Shipyard prior to shipment. No material may be shipped before acceptance is received.
**Contracting Entity and Contact Information**
The solicitation is managed by NAVSUP Weapon Systems Support Mechanicsburg, a federal office under the Department of Defense, Department of the Navy. The primary point of contact is Michael E. Thoman, reachable at 717-605-4608 or via email at [email protected].
**Procurement Type and Set-Aside**
This is a fixed-price procurement and is a total small business set-aside, as indicated by the applicable clause. The award will be issued bilaterally, requiring written acceptance by the contractor prior to execution. Past performance will be considered in the evaluation of offers.
**Special Considerations**
- The requirement is a rated order certified for national defense use, subject to Defense Priorities and Allocations System Regulation (15 CFR 700).
- Partial and early delivery is authorized and desired, at no additional cost.
- Government Quality Assurance will be performed at source, and contractors must notify the appropriate Government representative or DCMA office upon receipt of the order.
- All waivers and deviations require review and approval by the Contracting Officer.
- Mercury and mercury-containing compounds are strictly prohibited.
- Electronic signatures on certification documents are acceptable, provided they are controlled and unique to the individual signing.
**Constant Elements Throughout Contract Lifecycle**
Throughout the contract lifecycle, the following elements will remain constant:
- Adherence to NAVSEA drawings and specifications
- Maintenance of rigorous quality assurance and traceability standards
- Compliance with configuration control and change management procedures
- Submission and review of certification data prior to shipment
- Government inspection and acceptance requirements
- Total small business set-aside status
- National defense priority rating
**Response and Additional Information**
The solicitation is active, with a response deadline of March 25, 2026. Contractors interested in this opportunity should review the full solicitation details and associated documents available at [SAM.gov](https://sam.gov/opp/3a43a02464414c0b99cb86b8f33b7df9/view).
This procurement represents a highly specialized and regulated opportunity for qualified small businesses in the metal valve and pipe fitting manufacturing sector, particularly those with experience in defense-related, quality-assured, and traceable manufacturing processes. Contractors must be prepared to meet rigorous technical, quality, and documentation requirements to ensure the safety and reliability of critical shipboard systems.