SEAT,VALVE
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QZA62
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
Documents1
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QZA62) for the supply of a SEAT, VALVE component, classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820. This procurement is a Total Small Business Set-Aside, inviting qualified small business contractors to participate.
**Purpose and Scope**
The SEAT, VALVE to be procured is a critical component intended for use in a crucial shipboard system. The nature of this application means that the supplied material is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured). The failure of this component could result in serious personnel injury, loss of life, or catastrophic failure of vital shipboard systems, including the potential loss of the ship itself. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the highest standards of safety and reliability.
**Key Requirements and Deliverables**
- **Technical Specifications:** The seats are for a 3-inch Ball Valve and must conform to Naval Sea Systems Command drawing 517-5486333, Item 7, with specific material and property requirements. The material specified is Delrin (DuPont AF DE588, Teflon Filled Acetal), with detailed ASTM test methods and property values provided for specific gravity, melting point, tensile strength, impact resistance, compressive stress, water absorption, Rockwell hardness, Teflon fiber content, and dimensional stability.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO 9001, with calibration systems meeting ISO 10012 or ANSI/NCSL Z540.3 and ISO/IEC 17025. MIL-I-45208 is also referenced as an acceptable quality system standard. The contractor’s quality system and products are subject to government evaluation, verification, and inspection.
- **Certification and Traceability:** Full traceability from raw material to finished product is required, with unique batch or lot numbers marked on each seat (except Teflon seats, which are tagged). Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, via the Wide Area Workflow (WAWF) system.
- **Inspection and Testing:** Visual and dimensional inspections are required, with acceptance criteria specified in the ECDS (Electronic Contractor Data Submission) system. Sampling for certification must be performed on each heat/lot or batch. Government Source Inspection (GSI) at the contractor’s facility is mandatory.
- **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters.
- **Material Handling and Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements. Mercury and mercury-containing compounds are strictly prohibited.
- **Documentation:** Contractors must submit a Certificate of Compliance (C of C) with each shipment, detailing traceability, compliance with all specifications, and listing all conformance/compliance tests performed.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH)
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Kathryn E. Skutlin, Telephone: 717-605-2430, Email: [email protected]
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/e1147c4aef2e4176827886c57062f889/view)
**Procurement Type and Special Considerations**
- **Solicitation Type:** This is a bilateral solicitation, requiring written acceptance by the contractor prior to award.
- **Set-Aside:** Total Small Business Set-Aside.
- **DPAS Rating:** The resultant contract will be a “DO” rated order under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense.
- **Quality Manual Requirement:** Only sources with an acceptable Quality Assurance Manual are eligible for award.
- **Drawings and Data:** Access to technical drawings must be requested via SAM.gov, with CAGE code provided.
- **Submission Deadlines:** The solicitation closing date is extended to 07 April 2026 to allow for posting of drawings and vendor responses. The response deadline is 04 August 2026.
**Constant Elements Over Contract Lifecycle**
- The requirement for strict adherence to technical specifications, traceability, and quality assurance will remain throughout the contract.
- The need for government source inspection, configuration control, and compliance with all certification and documentation requirements will persist.
- The prohibition of mercury and the requirement for proper material handling and packaging are enduring stipulations.
- The contract will maintain its status as a small business set-aside and a DPAS-rated order for national defense.
**Conclusion**
This procurement represents a highly controlled and technically demanding opportunity for small business manufacturers with robust quality systems and experience in supplying critical shipboard components. Contractors must be prepared to meet rigorous certification, traceability, and inspection requirements, and to maintain close coordination with NAVSUP WSS and Portsmouth Naval Shipyard throughout the contract lifecycle. Interested parties should review the full solicitation and associated technical data, and ensure their quality assurance documentation is current and available for government review.
For further information or to request access to drawings, contact Kathryn E. Skutlin at the details provided above.