VALVE,BALL
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QZA47
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation for the manufacture and supply of a 6-inch ball valve, classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820. This procurement is part of the TRIPER Program and is designated as a total small business set-aside, offering an opportunity for qualified small business manufacturers specializing in high-integrity metal valves and pipe fittings.
Purpose and Scope:
The ball valve to be procured is intended for use in a critical shipboard system, where the integrity and reliability of the material are paramount. The contract explicitly identifies the valve as "SPECIAL EMPHASIS material" (Level I, Scope of Certification, or Quality Assured), invoking rigorous control procedures to ensure the correct material is received and installed. The consequences of failure—ranging from personnel injury to loss of vital shipboard systems or the ship itself—underscore the importance of strict adherence to specifications and quality assurance requirements.
Key Requirements and Objectives:
The valve must be manufactured in accordance with detailed Naval Ship Systems Command drawings and specifications, with numerous referenced documents and standards (including MIL, ASTM, ANSI, ISO, and Federal specifications). The scope includes:
- Strict material requirements for all components, including traceability and certification for both metallic and non-metallic parts.
- Special machining instructions (e.g., undrilled bolt holes and dowel pin holes for actuator mounting).
- Rigorous testing and certification protocols, including non-destructive testing (NDT), radiography, pressure testing, and chemical/mechanical analysis.
- Quality system requirements compliant with ISO-9001, ISO-10012, ISO-17025, or MIL-I-45208, with calibration systems per MIL-STD-45662 or ANSI-Z540.3.
- Configuration control, including procedures for waivers, deviations, and engineering change proposals (ECPs).
- Detailed marking and traceability requirements for all components, including fasteners and seats, to ensure full traceability to certification data.
- Government Furnished Equipment (GFE) handling and control procedures.
- Comprehensive inspection and acceptance protocols, including government quality assurance at source and mandatory submission of quality system procedures.
- Warranty of supplies for one year from date of delivery.
Expected Deliverables:
The contractor is expected to deliver fully compliant 6-inch ball valves, manufactured, tested, and certified per the contract requirements. Deliverables include:
- All required certification data (CDRLs) submitted 20 days prior to delivery.
- Final delivery of material within 450 days.
- Complete test certifications, material traceability documentation, and compliance certificates.
- Properly marked and packaged valves, with TRIPER program serial numbers and nameplates provided by NAVSUP WSS MECH.
- Adherence to all configuration control and quality assurance requirements throughout the contract lifecycle.
Contracting Entity and Contact Information:
The contracting entity is NAVSUP Weapon Systems Support Mechanicsburg, a federal office under the Department of Defense, Department of the Navy. The primary point of contact is Michael E. Thoman, reachable at 717-605-4608 or via email at [email protected]. The solicitation is active, with a response deadline of March 12, 2026. Full details and updates are available at the SAM.gov opportunity page: https://sam.gov/opp/af0d229a631f41ab9ee2458bd3038c6f/view.
Procurement Type and Special Considerations:
This is a fixed-price procurement, certified as a rated order for national defense use under the Defense Priorities and Allocations System Regulation (15 CFR 700). The contract is a total small business set-aside, and past performance will be considered in the evaluation of offers. Partial and early delivery is authorized and encouraged at no additional cost. The award will be issued bilaterally, requiring written acceptance by the contractor prior to execution.
Constant Elements Throughout Contract Lifecycle:
Throughout the contract, the following elements will remain constant:
- The requirement for strict compliance with all referenced specifications, drawings, and quality assurance standards.
- The need for traceability, certification, and configuration control for all materials and components.
- The obligation to maintain and document a robust quality system, subject to government review and audit.
- The handling and marking of all components per TRIPER program requirements.
- The prohibition of mercury and mercury-containing compounds in supplied materials.
- The requirement for government inspection and acceptance at source, including at subcontractor facilities.
Summary for Contractors:
This solicitation represents a highly specialized, technically demanding opportunity for small business manufacturers with proven capabilities in precision metal valve fabrication, quality assurance, and traceability. Contractors must be prepared to meet extensive documentation, testing, and certification requirements, maintain configuration control, and support government quality assurance activities. The contract is critical to national defense and shipboard safety, and only firms with robust quality systems, experience in Level I/SUBSAFE material, and the ability to deliver fully compliant products within the specified timeline should consider responding.
For further information, specifications, and submission instructions, contractors should consult the SAM.gov opportunity page and contact the designated NAVSUP WSS MECH representative.