Mobile Gantry Crane
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
FA5205 35 CONS PK
Contract Value
Not provided
Codes & Classification
Solicitation Number
FA520526QB015
NAICS
333923 - Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
Classification Code
3950
Additional Details
Documents2
The 35th Contracting Squadron, operating under the U.S. Air Force, has issued a combined synopsis/solicitation seeking qualified vendors to supply and deliver a Mobile Gantry Crane to Misawa Air Base, Japan. This procurement is classified under NAICS code 333923, which pertains to Overhead Traveling Crane, Hoist, and Monorail System Manufacturing, and is further identified by Product Service Code 3950. The solicitation is open to all vendors, as there are no set-aside restrictions associated with this opportunity.
The primary objective of this procurement is to acquire a mobile gantry crane that meets or exceeds a comprehensive set of technical specifications, ensuring robust performance and operational safety for use at Misawa Air Base. The crane must have a minimum lifting capacity of 10 tons and be constructed with steel frames and steel I-beams, including an 18-inch main trolley I-beam. Dimensional requirements are precise: the crane must not exceed a maximum height of 19 feet 5 inches, with a minimum height of 12 feet 7 inches. The maximum width at the casters is specified as 15 feet 8 inches, with an overall gantry top I-beam width of 15 feet. Depth parameters range from a minimum of 7 feet 10 inches to a maximum of 11 feet 4 inches. Additionally, the crane must provide at least 18 inches of clearance between the legs under the I-beam at maximum height and spread.
Key safety and operational features are mandated, including self-aligning I-beams, a safety cable to prevent over-spreading during adjustment, and pin-locking casters with four-position swivel locks. The crane must be equipped with eight 10-inch diameter polyurethane casters, all featuring brakes for secure positioning. Compatibility with a push trolley is required, with a headroom of 4.7 inches and flange width adjustment between 5.5 and 8.66 inches (actual 6 inches). The hoist must be powered, operating on 120V AC 60 Hz with a wall plug, and capable of variable speed operation with a maximum creep speed of 1.75 feet per minute. The hook must reach the floor, with a minimum hook height of 17 feet 1.5 inches and a minimum load clearance height of 15 feet 0.5 inches. The minimum pinch point between support beams is specified at 10 feet.
The successful contractor will be responsible for the direct delivery of the crane to Misawa Air Base, Japan. All equipment must be new and conform to the detailed requirements outlined in the attached Request for Quotation (RFQ) documents, which provide further technical and contractual details.
The procurement is managed by the 35th Contracting Squadron (FA5205 35 CONS PK), a federal office located at Misawa Air Base. Interested vendors may direct inquiries to the primary point of contact, Katie Kershaw, at [email protected] or by phone at 315-226-8035. A secondary contact, Kade Forrester, is also available at [email protected] or 315-226-8072.
The solicitation is currently active, with a response deadline of December 18, 2025, at 23:12 JST. Vendors are encouraged to review the full RFQ and attachments available via the official SAM.gov opportunity listing (https://sam.gov/opp/f1e23c1d03114881b06518260f575931/view) to ensure compliance with all requirements and to submit a comprehensive quotation by the specified due date.
This opportunity is well-suited for manufacturers and suppliers with experience in heavy-duty crane systems, particularly those capable of meeting stringent dimensional, safety, and operational specifications, and who can facilitate international delivery to a U.S. military installation in Japan.