Bolts

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

W6QK SIAD CONTR OFF

Contract Value

Not provided

Codes & Classification
Solicitation Number

W912GY26QA002

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5306

Additional Details
Set Aside

SBA

Place of Performance

Herlong, California, UNITED STATES

SourceSAM
Documents1
The Sierra Army Depot, located in Herlong, California, has issued a combined synopsis/solicitation for the procurement of a substantial quantity of various bolts and related fasteners. This requirement is intended to support ongoing operations at the Depot and is structured as a 100% small business set-aside, in accordance with SBA guidelines. The procurement will be conducted under Simplified Acquisition Procedures as outlined in FAR Parts 12 and 13.5, with the intent to award a single firm-fixed price purchase order. The scope of this solicitation encompasses the supply and delivery of four distinct types of bolts, each with specific technical and dimensional requirements: 1. **Steel Eyebolts for Lifting**: A total of 6,520 units are required. Each eyebolt must feature an M8 x 1.25 mm thread size, 76 mm thread length, be fully threaded, and have a closed, round eye with a 25 mm diameter and shoulder. The vertical lifting capacity must be at least 975 lbs. The specification references McMaster-Carr Part 3040T31 or an equivalent product. 2. **Carriage Bolts, Zinc Plated Steel**: The Depot requires 12,300 units of square-style carriage bolts, each with a 1/2-inch diameter, 13 thread count, 7-1/2 inch length, and coarse thread density. Additional dimensional requirements include a head diameter of 1.032 to 1.094 inches, head height of 0.250 to 0.270 inch, square width of 0.492 to 0.515 inch, square depth of 0.250 to 0.281 inch, and a minimum thread length of 1-1/2 inches. These bolts must conform to ASME B18.5 standards and be comparable to Bolt Depot Part 12040 or equal. 3. **Hex Head Lag Screws, Zinc-Plated**: The solicitation calls for 94,000 lag screws, each with a 3/8-inch diameter, 3-1/2 inch length, and 7 thread count. The width across flats must be 9/16 inch, head height between 0.226 and 0.268 inch, shoulder diameter from 0.360 to 0.388 inch, and a minimum shoulder length of 0.125 inch. These must meet ASME B18.2.1 standards and be similar to Bolt Depot Part 1077 or equal. 4. **Hex Head Bolts, Hot Dipped Galvanized Steel**: A total of 92,300 bolts are required, each with a 3/8-inch diameter, 5-1/2 inch length, 7 thread count, and similar dimensional requirements as the lag screws. These bolts must be hot-dipped galvanized to A153 plating specifications and conform to ASME B18.2.1, comparable to Bolt Depot Part 994 or equal. All products must meet the specified standards and be equivalent to the referenced commercial parts or better. Substitutions must be clearly identified and demonstrate full compliance with the stated requirements. The North American Industry Classification System (NAICS) code for this procurement is 332722, covering Bolt, Nut, Screw, Rivet, and Washer Manufacturing, with a small business size standard of 600 employees. The Product Service Code (PSC) is 5306. The place of performance is Herlong, California. The contracting office responsible for this solicitation is W6QK SIAD Contracting Office. The primary point of contact for contractual and technical inquiries is Jason Huth ([email protected]), with Melissa Kaarbo ([email protected]) as the secondary contact. Offerors must be registered in the System for Award Management (SAM) at the time of submission and maintain registration throughout the contract period, as required by FAR Clause 52.204-7. All questions regarding the solicitation must be submitted in writing via email, referencing the RFQ number, at least three business days prior to the closing date. No telephone inquiries will be accepted. Any amendments or updates to the solicitation will be posted exclusively on the SAM.gov website, and it is the responsibility of offerors to monitor the site for changes. This opportunity is well-suited for small businesses specializing in the manufacturing or supply of industrial fasteners who can meet the technical specifications, delivery requirements, and compliance obligations outlined in the solicitation. The firm-fixed price nature of the contract ensures price stability over the contract lifecycle, and the large quantities involved may offer economies of scale for qualified suppliers. For further details and to access the solicitation documents, interested parties should refer to the official posting on SAM.gov (Opportunity ID: 8826bec12e31437885ab41f186b9de08).