NUT, UNION
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFB04
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4730
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation (Procurement Identifier: N0010426QFB04) for the supply of a specialized component: the 1/4 inch Union Nut, manufactured in accordance with Leslie drawing number 19881N, Piece number 25. This procurement falls under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4730, indicating its relevance to contractors specializing in metal valve and pipe fitting production.
**Purpose and Scope**
The Union Nut is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) due to its critical application in shipboard systems. The correct manufacture and supply of this item are essential, as any defect or nonconformance could result in catastrophic failure, serious injury, loss of life, or loss of vital shipboard systems. The contract invokes stringent control procedures to ensure the receipt of correct material, reflecting its role as a Critical Safety Item (CSI).
**Key Requirements and Objectives**
- **Material and Manufacturing:** The Union Nut must be produced from ASTM-B505 C90300 or C92200, or ASTM-B584 C90300 or C92200 materials. Weld repair is strictly prohibited for these materials.
- **Testing and Certification:** Each Union Nut must undergo hydrostatic testing as specified in General Note 4.2.2 of BUSHIPs Drawing 1385946. Certifications for chemical and mechanical analysis are required, and all certification data must be traceable to the material’s unique marking.
- **Thread Inspection:** All threads must be inspected per FED-STD-H28 series, with System 21 as the minimum requirement unless otherwise specified. Internal threads must be formed by cutting, not cold forming.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001, ISO-10012, ANSI-Z540.3, and ISO-17025, or MIL-I-45208 with MIL-STD-45662 calibration requirements. The quality system and products are subject to government evaluation, verification, and audit.
- **Traceability:** Rigorous traceability from material to certification test report and Objective Quality Evidence (OQE) is required. Markings must be permanent and legible, with alternate methods allowed only if specified.
- **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements.
- **Mercury-Free:** No mercury or mercury-containing compounds may be used or come into contact with supplied hardware.
**Expected Deliverables**
- Union Nuts manufactured and tested per the specified drawings and standards.
- Complete certification data, including test results, traceability, and compliance statements, submitted via Wide Area Work Flow (WAWF) for review and acceptance by Portsmouth Naval Shipyard (DODAAC N50286).
- Certificates of compliance and material certification reports, referencing all applicable standards and specifications.
- Documentation of quality system procedures, inspection records, and traceability controls.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS)
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Lydia M. Shaloka, Telephone: 215-697-4717, Email: [email protected]
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/339f39ab48444220ab0f939073f8ae73/view)
**Procurement Type and Special Considerations**
- **Solicitation Type:** Fixed-price contract with inspection and acceptance at destination (FOB Destination).
- **Priority Rating:** Any contract resulting from this solicitation will be a "DO" rated order under the Defense Priorities and Allocations System (DPAS), certified for national defense use.
- **Emergency Acquisition Flexibilities (EAF):** This order is issued pursuant to EAF, indicating expedited processes and requirements.
- **Buy American/Free Trade Agreements:** Compliance with Buy American and Free Trade Agreements is required, with relevant certifications and representations.
- **Warranty:** Supplies of a noncomplex nature are warranted for one year from the date of delivery.
- **AbilityOne Support:** Navy use of AbilityOne support contractor provisions apply.
**Submission and Review Process**
- Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment. No material may be shipped before acceptance is received.
- All documentation must be submitted via WAWF, with notifications sent to [email protected] and the primary contact.
- Contractors must ensure all requirements, including traceability, quality assurance, and configuration control, are met throughout the contract lifecycle.
**Constant Elements Over Contract Lifecycle**
- The Union Nut’s critical safety designation and associated quality, traceability, and certification requirements.
- The requirement for compliance with specified standards, drawings, and quality systems.
- The necessity for government review, audit, and acceptance prior to shipment.
- The prohibition of mercury and weld repair, and the requirement for permanent traceability markings.
- The use of WAWF for documentation submission and acceptance.
**Conclusion**
This solicitation represents a highly specialized and controlled procurement for a critical shipboard component. Contractors with expertise in precision metal valve and pipe fitting manufacturing, robust quality assurance systems, and experience with defense-related traceability and certification requirements are well-positioned to respond. The opportunity demands strict adherence to technical specifications, quality standards, and government review processes, ensuring the safety and reliability of vital naval systems.
For further information or to request access to drawings, contractors should contact Lydia M. Shaloka at the provided email or phone number and refer to the solicitation page on SAM.gov.