Gas Adsorbent Modules
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
W6QK ACC-PICA
Contract Value
Not provided
Codes & Classification
Solicitation Number
W15QKN-25-X-1AXT
NAICS
326199 - All Other Plastics Product Manufacturing
Classification Code
9330
Additional Details
Documents4
The Army Contracting Command-New Jersey (ACC-NJ), located at Picatinny Arsenal, NJ, is conducting a market survey to identify qualified sources for the production of Gas Adsorbent Modules (GAMs) in support of the Project Manager for Combat Ammunition Systems (PM-CAS). This Sources Sought Notice (Procurement Identifier: W15QKN-25-X-1AXT) is issued strictly for informational and planning purposes and does not constitute a Request for Proposal or a commitment to contract. No reimbursement will be provided for any costs incurred in responding to this notice.
The primary objective of this procurement activity is to support the warfighter by ensuring the availability of Gas Adsorbent Modules for Fiscal Years 2026 through 2030. GAMs are critical safety components designed to mitigate and neutralize phosphine gas emissions within ammunition containers and fiber tubes. Phosphine gas, when present in high concentrations (greater than 500 ppm), poses a significant risk of spontaneous combustion and presents lethal health hazards to personnel. The GAM is engineered to adsorb and minimize phosphine levels, thereby enhancing safety during storage and handling of ammunition.
The Gas Adsorbent Module is a two-piece red plastic ring constructed from high-impact polystyrene. Its approximate dimensions are a height of 1.85 inches, an outer diameter of 3.1 inches, and an inner diameter of 2.3 inches. The housing consists of upper and lower interlocking sections, secured with identifying tape that includes a printed warning. Inside the housing, two Tyvek bags containing commercially available phosphine adsorbent are retained by two packet retainers made of Melt Processable Rubber (MPR). Each retainer is approximately 1.68 inches tall, with a cross-section of .265 inches by .335 inches, and features a C-shaped notch to secure the bag.
Interested contractors must be capable of manufacturing GAMs to these specifications and must be able to handle technical data marked Distribution D, which is authorized for Department of Defense and U.S. DoD contractors only. To access the Technical Data Package (TDP), firms are required to submit a signed and completed DD Form 2345 (Militarily Critical Technical Data Agreement), AMSTA-AR Form 1350 (Technical Data Request Questionnaire), and a Non-Disclosure Agreement. It is important to note that no classified information or materials are required for this effort.
The procurement is classified under NAICS Code 326199 (All Other Plastics Product Manufacturing), with Product Service Code 9330. The place of performance is within the United States. Contractors must be registered in the System for Award Management (SAM) at http://www.sam.gov to be eligible for any future contract award.
Capability statements and inquiries should be submitted via email only—telephone inquiries will not be accepted. The primary point of contact is Contract Specialist Kaley Casagrande ([email protected]), and the secondary contact is Contracting Officer Christopher W. Brown ([email protected]). Responses to this notice are due no later than March 31, 2026.
This opportunity is managed by W6QK ACC-PICA, a federal office under the Department of Defense, Department of the Army. Contractors evaluating this opportunity should consider their ability to manufacture high-impact polystyrene components, assemble chemical adsorbent modules, and comply with DoD technical data handling requirements. The scope and requirements outlined in this notice are expected to remain constant throughout the contract lifecycle.
For further details and access to attachments, interested parties may refer to the official notice at https://sam.gov/opp/cb734da0e8234975b179110bfabcaf56/view.