HEAD,FLUID FILTER
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QZA31
NAICS
333998 - All Other Miscellaneous General Purpose Machinery Manufacturing
Classification Code
4330
Additional Details
The Naval Supply Systems Command (NAVSUP) Weapon Systems Support, Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QZA31) for the procurement of a "Head, Fluid Filter," classified under Product Service Code 4330 (Centrifugals, Separators, and Pressure and Vacuum Filters) and NAICS Code 333998 (All Other Miscellaneous General Purpose Machinery Manufacturing). This procurement is critical in nature, supporting vital shipboard systems where material failure could result in severe consequences, including personnel injury, loss of life, or loss of shipboard systems. As such, the item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures.
**Purpose and Scope**
The primary objective of this solicitation is to acquire a Head, Fluid Filter, to be used in a crucial shipboard application. The procurement mandates the use of Additive Manufacturing (AM) for specific piece part components, as detailed in the technical data package (TDP). The contractor must ensure full compliance with all technical, material, marking, testing, and acceptance requirements for both individual piece parts and the total end item. The scope encompasses not only the manufacture and delivery of the filter head but also comprehensive certification, traceability, and quality assurance documentation.
**Key Requirements and Deliverables**
- **Additive Manufacturing:** The solicitation requires mandatory use of Additive Manufacturing for designated components. Contractors must submit the applicable AM manufacturer or industry standard(s) for approval prior to production, and maintain conformance with all specified requirements.
- **Technical Data and Drawings:** Contractors must adhere to Admiral Filter Company Drawing 601491 (item 1) and Drawing 204452, with specific revisions and distribution codes as referenced in the solicitation. These documents are not provided with the contract and must be obtained by the contractor.
- **Material and Process Control:** All materials must meet specified standards (e.g., PPD 802-8979760 Class 1 Grade B, MIL-DTL-21562, MIL-EN67 CuNi), with controlled interpass temperatures and heat treatment processes. Feedstock lots from separate heats are not to be mixed within a manufacturing lot.
- **Testing and Certification:** The contractor is responsible for performing and certifying a range of tests, including volumetric (ultrasonic) inspection, visual inspection, quality conformance/compliance inspection, heat treatment verification, non-destructive testing (as applicable), and hydrostatic testing of assemblies. Complete records of all tests, heat treatments, and weld repairs must be provided.
- **Traceability and Marking:** Each additively manufactured component must be permanently marked with "AM-DED" and traceability markings per MIL-STD-792, ensuring direct linkage to material certification data. Markings must not affect form, fit, or function.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. The system and products are subject to government evaluation, verification, and acceptance.
- **Documentation and Data Submission:** Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, via the Wide Area Work Flow (WAWF) system. No material may be shipped before acceptance is received.
- **Configuration Control:** The contractor is responsible for maintaining the equipment baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters.
- **Subcontractor Oversight:** The prime contractor must ensure all sub-tier suppliers meet the same quality and traceability requirements, with periodic audits and flow-down of all applicable requirements.
- **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific instructions.
**Contracting Entity and Contact Information**
- **Contracting Agency:** NAVSUP Weapon Systems Support, Mechanicsburg (NAVSUP WSS MECH)
- **Location:** Mechanicsburg, PA
- **Primary Contact:** Jeffrey A. Dietrich, Telephone: 717-605-4078, Email: [email protected]
**Procurement Type and Special Considerations**
This is a bilateral, fixed-price solicitation requiring the contractor’s written acceptance prior to award execution. The order will be a "DO" rated order under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense, emergency preparedness, and energy program use. The procurement is not identified as a set-aside for small business or other socioeconomic programs in the provided information.
**Additional Considerations**
- **Government Source Inspection (GSI):** Government quality assurance will be performed at the source, and contractors must notify the appropriate government representative or DCMA office upon receipt of the order.
- **Waivers and Deviations:** All requests for waivers or deviations must be submitted to the Contracting Officer for review and approval, with detailed justification and impact analysis.
- **Mercury-Free Requirement:** No mercury or mercury-containing compounds may be used or come into contact with the supplied hardware.
- **Electronic Data Submission:** The Electronic Contractor Data Submission (ECDS) system is used for certain data submissions, clarifications, and waiver requests.
**Constant Elements Throughout Contract Lifecycle**
- The requirement for additive manufacturing and strict adherence to technical data package specifications.
- Rigorous quality assurance, traceability, and certification protocols.
- Government review and acceptance of all certification data prior to shipment.
- Maintenance of configuration control and prompt reporting of any changes or nonconformances.
- Ongoing oversight of subcontractors and flow-down of all requirements.
- Compliance with all applicable federal, military, and industry standards as referenced.
**Summary for Contractors**
This opportunity is suited for contractors with advanced capabilities in additive manufacturing, robust quality assurance systems, and experience with high-assurance, traceable supply chains for critical shipboard components. The solicitation demands meticulous compliance with technical, material, and process requirements, comprehensive documentation, and proactive engagement with government quality assurance processes. Contractors must be prepared for detailed oversight, configuration management, and timely submission of all required data and certifications.
Interested parties should review the full solicitation and referenced documents, and direct any questions to the primary contact listed above. The response deadline is January 30, 2026.
For more information and to access the solicitation, visit: [SAM.gov Opportunity](https://sam.gov/opp/5ad9a32706294a04819fa3c886949dba/view).