STEM

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QZA23

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (Procurement Identifier: N0010426QZA23) for the manufacture and supply of a critical shipboard component, specifically a "Stem" (item 14), in accordance with Naval Sea Systems Command Drawing 7285216. This procurement falls under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, indicating its relevance to metal valve and pipe fitting manufacturing for naval applications. **Purpose and Scope** The primary purpose of this procurement is to acquire a stem component that will be used in a crucial shipboard system. The item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), reflecting its criticality to ship safety and operational integrity. The use of incorrect or defective material could result in catastrophic failure, serious injury, loss of life, or loss of vital shipboard systems. As such, stringent quality assurance and traceability requirements are imposed to ensure the correct material is received and installed. **Key Requirements and Objectives** - **Material and Manufacturing:** The stem must be manufactured from QQ-N-286, Alloy UNS N05500, form 2, annealed and age hardened. Weld repair is not permitted on QQ-N-286 material. - **Testing and Certification:** Quantitative chemical and mechanical analysis is required, with certifications for annealing, age hardening, and ultrasonic inspection on starting material (especially for items with a diameter or minimum distance between parallel surfaces of 4 inches or greater). Testing must be performed by approved laboratories, including Huntington Alloys, Metallurgical Consultants, Naval Surface Warfare Center Carderock, Teledyne Allvac, Westmoreland Mechanical Testing, Mannesmann Rohrenwerke, and ThyssenKrupp VDM USA. - **Traceability:** All material must be traceable to certification test reports via unique traceability markings, which must be permanently applied or affixed to the material. Traceability must be maintained through all process operations, including subcontracted operations. - **Quality System:** Contractors must maintain a quality system compliant with ISO-9001, ISO-10012, ANSI-Z540.3, and ISO-17025, or MIL-I-45208 and MIL-STD-45662. The system is subject to government evaluation, verification, and audit. - **Inspection:** All threads must be inspected per FED-STD-H28 or ASME B1 series. O-ring grooves and sealing surfaces must be inspected per contractually invoked drawings/specifications or General Acceptance Criteria (GAC) if not specified. - **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. - **Mercury-Free:** Mercury and mercury-containing compounds are strictly prohibited. - **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements. - **Documentation:** Certificates of compliance, test certifications, and material certification data must be submitted via Wide Area Work Flow (WAWF) for review and acceptance by Portsmouth Naval Shipyard prior to shipment. No material may be shipped before acceptance. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), a federal office under the Department of Defense, Department of the Navy. - **Primary Contact:** Robert H. Langel, Telephone: 717-605-3353, Email: [email protected]. - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/b8e917d3abaa45af87918883ef0acbb6/view) **Procurement Type and Set-Aside** - This solicitation is a total small business set-aside, as indicated by the applicable FAR clause. Only qualified small businesses under NAICS 332919 (size standard: 750 employees) are eligible to submit offers. - The procurement is a fixed-price contract, with inspection and acceptance at destination (FOB Destination). - Emergency Acquisition Flexibilities (EAF) are invoked, and the contract will be DO certified for national defense under the Defense Priorities and Allocations System (DPAS). **Special Considerations** - Access to technical data and drawings requires a request through SAM.gov and subsequent email notification to the listed POC. - Past performance will be considered in the evaluation of offers. - Government Quality Assurance will be performed at the source, and the place of performance may not be changed without authorization. - Subcontractor quality assurance and traceability requirements must be flowed down to all sub-tier suppliers. - Electronic signatures on certification documents are permitted, provided they are controlled and unique to the individual signing. **Constant Elements Over Contract Lifecycle** - The critical safety nature of the item and associated quality, traceability, and certification requirements will remain unchanged. - The requirement for compliance with specified standards, configuration control, and government inspection/audit will persist throughout the contract. - The prohibition of mercury and the need for proper packaging and marking will be constant. - The use of WAWF for documentation submission and acceptance by Portsmouth Naval Shipyard is a fixed process. **Summary for Contractors** This opportunity is highly specialized and demands rigorous adherence to quality assurance, traceability, and certification protocols. Contractors must demonstrate robust quality systems, experience with critical safety items, and the ability to manage complex documentation and inspection requirements. The solicitation is open exclusively to small businesses in the relevant NAICS category, and offers must be submitted in accordance with the most current technical data and drawings available via SAM.gov. Interested parties should carefully review the technical specifications, quality requirements, and submission instructions to ensure alignment with their capabilities and compliance with all contract terms. For further information or to request access to technical data, contact Robert H. Langel at the provided email or phone number. The solicitation remains active, with responses due by April 15, 2026.