STEM,FLUID VALVE
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QZA24
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation for the procurement of a STEM, FLUID VALVE, classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820. This procurement is a total small business set-aside, inviting qualified small business contractors to submit offers for the manufacture and delivery of this critical shipboard component.
**Purpose and Scope**
The STEM, FLUID VALVE is designated as a Special Emphasis Material (Level I, Scope of Certification, or Quality Assured), intended for use in a crucial shipboard system. The integrity of this component is paramount, as the use of incorrect or defective material could result in catastrophic failure, including serious personnel injury, loss of life, or loss of vital shipboard systems. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the highest standards of safety and reliability.
**Key Requirements and Deliverables**
- **Technical Specifications:** The stem must be manufactured in accordance with NAVSEA drawing 845-7108906, item 12, with specific modifications and amplifications as detailed in the solicitation. The primary material is QQ-N-286, Form 2, annealed and age-hardened, with welding on this material strictly prohibited.
- **Testing and Certification:** Quantitative chemical and mechanical analysis is required for the stem, with certifications for annealing, age hardening, and ultrasonic inspection of starting material (especially for items with a diameter or minimum distance between parallel surfaces of 4 inches or greater). The Slow Strain Rate Tensile Test must be performed by one of several specified laboratories.
- **Thread and Surface Inspection:** All threads must be inspected per FED-STD-H28 or ASME B1 series, with specific requirements for O-ring grooves and mating sealing surfaces. The General Acceptance Criteria (GAC) standard applies where drawings or specifications do not provide defect criteria.
- **Traceability and Documentation:** Full traceability from material to certification test reports is mandatory. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, via the Wide Area Work Flow (WAWF) system. No material may be shipped before acceptance is received.
- **Quality System:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208), with calibration systems per ISO-10012 or ANSI-Z540.3 with ISO-17025. The system and all products are subject to government evaluation, verification, and inspection.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and the contract schedule.
- **Warranty:** A one-year warranty from the date of delivery is required for all supplied items.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH)
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Robert H. Langel, Telephone: 717-605-3353, Email: [email protected]
**Procurement Type and Special Considerations**
This is a fixed-price solicitation, issued under Emergency Acquisition Flexibilities (EAF), and will result in a bilateral award requiring the contractor’s written acceptance. The contract will be DO certified for national defense under the Defense Priorities and Allocations System (DPAS), indicating its priority for national defense and emergency preparedness. All contractual documents will be considered issued upon electronic transmission or mailing by the government.
The solicitation is a total small business set-aside, with a NAICS size standard of 750 employees. Past performance will be considered in the evaluation of offers, and all applicable federal, military, and commercial specifications and standards are invoked as referenced in the solicitation.
**Constant Elements Throughout Contract Lifecycle**
- The requirement for strict adherence to technical drawings, specifications, and quality assurance procedures.
- The necessity for comprehensive traceability and certification for all materials and processes.
- The obligation to maintain and document a robust quality management system, subject to government audit and inspection.
- The use of WAWF for submission of certification data and the prohibition of shipment prior to government acceptance.
- The application of MIL-STD 2073 packaging and a one-year warranty on all supplied items.
- The contract’s status as a rated order under DPAS for national defense.
**Summary**
This procurement represents a critical opportunity for small business manufacturers with expertise in high-precision, high-reliability metal valve and pipe fitting production, particularly those experienced with Level I/SUBSAFE Navy material requirements. Contractors must demonstrate the ability to meet rigorous technical, quality, and traceability standards, and be prepared for comprehensive government oversight throughout the contract lifecycle. Interested parties should review the full solicitation and associated drawings (available via SAM.gov upon request) and direct any technical or contractual inquiries to the primary contact listed above.
For further details and to access solicitation documents, visit the official notice at: https://sam.gov/opp/14bc6f4a05d84e6585edecb210a561aa/view