VALVE,BALL

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QZA20

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
Documents1
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (Procurement Identifier: N0010426QZA20) for the supply of a specialized 5-inch, 3-way ball valve, classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820. This procurement is designated as a total small business set-aside, inviting qualified small business contractors to respond. **Purpose and Scope** The ball valve to be procured is intended for use in a critical shipboard system, where the integrity and reliability of the supplied material are paramount. The valve is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), reflecting its role in systems where failure could result in serious injury, loss of life, or catastrophic shipboard failures. As such, the contract invokes stringent control procedures to ensure the correct material is received and installed. **Key Requirements and Objectives** The contract requires the manufacture and delivery of a complete 5-inch, 3-way ball valve in accordance with Newport News Shipbuilding drawing 6404977, Assembly 96, engineering report 5959311C5, and engineering notice 117895, with specific modifications and exclusions detailed in the solicitation. The valve is to be supplied less the hydraulic actuator (Find 74), and all actuator-associated mounting parts must be bagged and attached to the valve. Bolt holes on mounting flanges must not be drilled, and the thermocouple hole for the ball (Find 31) is not required. Material certifications and traceability are required for several key components, including the body, stem retaining nut, tailpiece, continuous threaded studs, stem, self-locking heavy hex nuts, ball, seats, thrust washer, and bearing. Each material must conform to specified standards (e.g., ASTM, MIL-DTL, QQ-N, SAE AMS) and undergo quantitative chemical and mechanical analysis. Non-metallic components, such as seats and bearings, must meet defined physical properties and be certified accordingly. Testing and inspection requirements are extensive, including liquid penetrant, dye penetrant, ultrasonic, weldability, quality conformance, and production tests. Radiography is required for the valve body, and hydrostatic pressure testing must be performed to confidential specifications. All threads must be inspected per FED-STD-H28 or ASME B1 series, and thread lubricants containing molybdenum disulfide are prohibited. The contract mandates a robust quality assurance system, compliant with ISO-9001 (or MIL-I-45208 as an alternate), and calibration systems per ISO-10012 or ANSI-Z540.3 with ISO-17025. Contractors must maintain detailed inspection and test records, ensure traceability from material to certification, and provide certificates of compliance for all supplied items. Subcontractor oversight and periodic audits are required to ensure continued quality and compliance. **Expected Deliverables** - Complete 5-inch, 3-way ball valve assemblies (quantity: 5), manufactured and tested per the specified drawings and standards. - All actuator mounting parts, bagged and attached to each valve. - Comprehensive material certifications, traceability documentation, and test reports for all components. - Certificates of compliance, including traceability to marking applied on each item. - Quality assurance documentation and inspection system procedures. - Radiographic film, shooting sketches, reader sheets, and documentation records for radiographed items. - Marking and tagging of all components per contract requirements. **Contracting Entity and Contact Information** The solicitation is issued by NAVSUP Weapon Systems Support Mechanicsburg, a federal office under the Department of Defense, Department of the Navy. The primary point of contact is Robert H. Langel, reachable at 717-605-3353 or via email at [email protected]. The solicitation and associated drawings are accessible via SAM.gov, with access requests required for classified documents (CONFIDENTIAL level). Offerors must possess a valid U.S. Security Clearance of CONFIDENTIAL or higher to respond, as the solicitation includes classified annexes. **Procurement Type and Special Considerations** This is a fixed-price procurement, utilizing Emergency Acquisition Flexibilities (EAF) and requiring bilateral contract execution. The award will be DO certified for national defense under the Defense Priorities and Allocations System (DPAS), and all contractual documents will be considered "issued" upon electronic transmission or mailing. The procurement is a total small business set-aside, with NAICS code 332919 and a size standard of 750 employees. Contractors must comply with equal opportunity requirements for veterans and workers with disabilities, Buy American and Free Trade Agreements provisions, and must submit annual representations and certifications. Past performance will be considered in the evaluation of offers, and all contractual documents, modifications, and communications will be handled electronically. **Constant Elements Over Contract Lifecycle** Throughout the contract lifecycle, the following elements will remain constant: - The requirement for strict material traceability, certification, and compliance with specified standards. - The necessity for a robust quality assurance system and comprehensive documentation. - The obligation to maintain configuration control and submit engineering change proposals for any modifications. - The prohibition of mercury and molybdenum disulfide in supplied materials. - The requirement for U.S. security clearance and handling of classified documents per DoD regulations. - The expectation of government quality assurance at source and periodic audits of subcontractors. **Summary for Contractors** This opportunity is highly specialized, requiring expertise in manufacturing metal valves for critical shipboard applications, with rigorous quality, traceability, and certification requirements. Contractors must have the capability to handle classified information, maintain a certified quality system, and ensure compliance with all material, testing, and documentation standards. The contract is suitable for small businesses with proven experience in defense-related valve manufacturing and a demonstrated ability to meet stringent government requirements. Interested parties should review the solicitation and associated drawings on SAM.gov, ensure they meet the security clearance requirements, and prepare comprehensive responses addressing all technical, quality, and compliance aspects. For further information or access to classified documents, contact Robert H. Langel at the provided email or phone number. For full solicitation details and attachments, visit: https://sam.gov/opp/a4fbf29f86f84a4fb3b08653a713c257/view