PARTS KIT,BALL VALV

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFA78

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QFA78) for the supply of a Parts Kit for a 1-inch Ball Valve, intended for use in critical shipboard systems. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, reflecting its focus on specialized valve components for naval applications. **Purpose and Scope** The primary objective of this solicitation is to acquire a parts kit comprising one ball (piece 18, per Naval Sea Systems Command Drawing 8617511) and two mating seats (piece 17, per Drawing 7285297). These components are designated as SPECIAL EMPHASIS material due to their application in vital shipboard systems where material failure could result in catastrophic outcomes, including personnel injury, loss of life, or loss of the ship. As such, stringent quality assurance and traceability requirements are invoked to ensure the integrity and reliability of supplied materials. **Key Requirements and Deliverables** Contractors are required to deliver a parts kit that meets exacting material, manufacturing, and certification standards: - **Material Specifications**: - The ball must be manufactured from SAE-AMS-6931 or centrifugally cast 6AL-4V, ASTM-B367, Grade C-5, with mechanical properties as specified in supplementary requirements. - Seats must be made from MD71-GG Mearthane (Graphite Filled Urethane), exclusively manufactured by Mearthane Products Inc., Cranston, RI, and must meet defined ASTM property values. - **Testing and Certification**: - Hydrostatic testing of each ball at 1800 PSI for 30 minutes is required, with no leakage or deformation permitted. Dye penetrant inspection may substitute for hydrostatic testing if necessary. - Non-destructive testing for weld repairs and production welds must be performed per applicable fabrication specifications. - Certifications for all tests, including material properties and performance, must be submitted and traceable to each item. - **Quality Assurance**: - Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. - Government Quality Assurance at source is required, and facilities must be available for audit by the Contracting Officer or authorized representative. - All inspection and test records must be maintained and traceable to the material inspected. - **Traceability and Configuration Control**: - Complete traceability from material to certification test reports is mandatory, with permanent marking requirements for balls and seats as specified. - Configuration control must be maintained, and any waivers, deviations, or engineering changes require prior approval and submission of detailed proposals. - **Packaging and Delivery**: - Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements. - Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before acceptance. - **Warranty**: - A one-year warranty from the date of delivery is required for supplies of a noncomplex nature. **Contracting Entity and Contact Information** The solicitation is managed by NAVSUP Weapon Systems Support Mechanicsburg, a federal office under the Department of Defense, Department of the Navy. The primary point of contact is Lydia M. Shaloka, reachable at 215-697-4717 or [email protected]. Additional notifications regarding WAWF submissions should be sent to [email protected]. **Procurement Type and Special Considerations** This is a fixed-price procurement, issued as a total small business set-aside, ensuring that only qualified small businesses are eligible to compete. The order is "DO" rated under the Defense Priorities and Allocations System (DPAS), signifying its importance for national defense and emergency preparedness. Emergency Acquisition Flexibilities (EAF) are applied, and past performance will be considered in the evaluation of offers. **Relevant Documentation and Standards** The solicitation references multiple technical documents, standards, and drawings, including but not limited to: - ANSI/ASQ Z1.4, ASTM-B367, MIL-STD-792, MIL-STD-2035, SAE AMS 6931, ISO 9001, ISO 10012, ISO/IEC 17025, MIL-I-45208, MIL-STD-45662, ANSI/NCSL Z540.3, and NAVSEA-specific welding and brazing standards. - Access to drawings and technical data may require registration and request via the Government’s beta.SAM website and the Electronic Contractor Data Submission (ECDS) system. **Constant Elements Throughout Contract Lifecycle** Throughout the contract, the following elements will remain constant: - The requirement for traceability, certification, and compliance with specified material and quality standards. - The necessity for government source inspection and acceptance prior to shipment. - The obligation to maintain configuration control and submit any changes for approval. - The application of DPAS priority rating and adherence to emergency acquisition procedures. - The expectation of rigorous quality assurance, documentation, and record-keeping. **Summary for Contractors** This opportunity is highly specialized, demanding strict adherence to material, manufacturing, testing, and certification requirements for components used in critical naval systems. Contractors must possess robust quality assurance systems, experience with traceability and configuration control, and the capability to comply with government inspection and documentation protocols. The solicitation is open exclusively to small businesses, and the contract’s national defense priority underscores the importance of timely and reliable performance. Interested parties should review the full solicitation and technical requirements at https://sam.gov/opp/c670164cb5ed48358b51c7f1f105c66a/view and direct any inquiries to the designated point of contact. The response deadline is March 19, 2026.