STUD,CONTINUOUS THR

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFA72

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5307

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS Mech), has issued a solicitation (Procurement Identifier: N0010426QFA72) for the supply of a "STUD, CONTINUOUS THR" (Product Service Code: 5307 – Studs), classified under NAICS 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing). This procurement is critical in nature, supporting a crucial shipboard system where material failure could result in severe consequences, including personnel injury, loss of life, or loss of vital shipboard systems. As such, the item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures. **Purpose and Scope** The primary objective of this procurement is to acquire continuous thread studs manufactured in strict accordance with William Powell Company Drawing 67153, Piece 14, and as further specified in the solicitation. The studs are intended for use in high-reliability naval applications, where the integrity and traceability of materials are paramount. The contract encompasses the supply, certification, inspection, and delivery of these studs, with comprehensive requirements for material traceability, quality assurance, and compliance with applicable military and federal standards. **Key Requirements and Deliverables** - **Material and Manufacturing:** The studs must be produced from QQ-N-286, Class A material, with full quantitative chemical and mechanical analysis required. K-MONEL fasteners must be heat treated per QQ-N-286, with specific requirements for solution annealing and age hardening after heading and thread rolling operations. - **Testing and Certification:** Certifications are required for liquid penetrant inspection (per T9074-AS-GIB-010/271 and MIL-DTL-1222), ultrasonic inspection (for items with a diameter or minimum distance between parallel surfaces of 4 inches or greater), and mechanical properties (tensile, yield, elongation, and hardness). Slow strain rate tensile tests must be performed by one of several specified laboratories. - **Traceability:** Complete traceability from raw material to finished product is mandatory. Each shipment must include one additional fastener per heat/lot for traceability purposes. All certification data must be uniquely traceable to the material supplied. - **Marking:** Fasteners must be permanently marked in accordance with MIL-DTL-1222 and MIL-STD-792, including material symbol, manufacturer’s identification, and traceability marking. - **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3 with ISO-17025. The quality system and products are subject to government evaluation and source inspection. - **Documentation:** Certificates of compliance, test certifications, and material certification reports must be provided, referencing all applicable standards and specifications. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, via Wide Area Work Flow (WAWF). - **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements. - **Configuration Control:** The contractor is responsible for maintaining configuration control and must submit Engineering Change Proposals (ECPs) for any changes affecting form, fit, function, or interface parameters. - **Mercury-Free Requirement:** No mercury or mercury-containing compounds may be used or come into contact with the supplied hardware. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS Mech) - **Department/Agency:** Department of Defense, Department of the Navy - **Primary Contact:** Jordan D. Neely, Telephone: 717-605-8197, Email: [email protected] - **Alternate POC (as per amendment):** Lydia M. Shaloka, Email: [email protected] **Procurement Type and Special Considerations** - **Solicitation Type:** This is a formal solicitation (active as of the notice date). - **Set-Aside:** No specific set-aside is indicated in the provided information. - **Contract Priority:** Any contract awarded will be a "DX" rated order under the Defense Priorities and Allocations System (DPAS), certified for national defense use. - **Evaluation Criteria:** Past performance will be considered in the evaluation of offers, in accordance with FAR 13.106(a)(2) and DFARS 252.213-7000. - **Emergency Acquisition:** The procurement is issued under Emergency Acquisition Flexibilities. - **Delivery Schedule:** Submission of all certification data is required 20 days prior to delivery, with final delivery of material within 365 days. Early and incremental deliveries are acceptable at no additional cost. **Constant Elements Over Contract Lifecycle** - The requirement for strict material traceability, quality assurance, and compliance with all referenced standards and specifications will remain constant throughout the contract. - The need for government source inspection, configuration control, and submission of all required documentation prior to shipment is ongoing. - The prohibition of mercury and the requirement for proper marking and packaging will persist for all contract deliverables. **Summary for Contractors** This opportunity is highly specialized and suitable for manufacturers with demonstrated experience in producing high-reliability, traceable fasteners for critical naval applications. Contractors must have robust quality management systems, the ability to perform or coordinate specialized testing and certification, and the infrastructure to ensure full compliance with all traceability, marking, and documentation requirements. The contract’s criticality, configuration control, and government oversight make it essential that only those with proven capabilities and a strong track record in similar defense procurements consider responding. For further details and to access the full solicitation, interested parties should refer to the official notice at [SAM.gov Opportunity ID 3e12d7d6a43048bc84a56a70537d0833](https://sam.gov/opp/3e12d7d6a43048bc84a56a70537d0833/view).