NUT, RETAINING
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFA63
NAICS
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Classification Code
5310
Additional Details
The Naval Supply Systems Command Weapon Systems Support (NAVSUP WSS) in Mechanicsburg, PA, has issued a solicitation (Procurement Identifier: N0010426QFA63) for the supply of a specialized retaining nut, classified under Product Service Code 5310 (Nuts and Washers) and NAICS Code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing). This procurement is a total small business set-aside, offering an opportunity exclusively for qualified small business manufacturers in the relevant sector.
**Purpose and Scope**
The retaining nut to be procured is a critical component intended for use in a crucial shipboard system. The solicitation underscores the importance of this item by designating it as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), meaning that any deviation, defect, or nonconformance could result in catastrophic failure, serious personnel injury, loss of life, or loss of vital shipboard systems. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the highest level of reliability and safety.
**Key Requirements and Deliverables**
- **Technical Specifications:** The Valve Disc Nut must be manufactured in accordance with Naval Sea drawing 845-7016077, Item 10, with reference to General Notes drawing 803-5959311 and liability ER7016077B194. The material specified is ASTM-B446, UNS N06625, Grade 1.
- **Testing and Certification:** Quantitative chemical and mechanical analysis is required, with certifications for non-destructive tests (NDT) on weld repairs and/or production welds as applicable. All threads must be inspected per FED-STD-H28 or ASME B1 series standards.
- **Welding and Brazing:** Any welding or brazing must comply with NAVSEA standards (S9074-AR-GIB-010A/278, 0900-LP-001-7000, S9074-AQ-GIB-010/248), with procedures and qualification data submitted for approval prior to execution.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 for calibration), with calibration systems per ISO-10012, ANSI-Z540.3, and ISO-17025. Government Quality Assurance (GQA) at source is required, and the contractor’s quality system is subject to review and audit.
- **Traceability:** Full traceability from raw material to finished product is mandatory, with unique traceability markings on each item, linked to certification test reports. Any process altering material properties requires re-identification and re-certification.
- **Documentation:** Certificates of Compliance (C of C) must be provided, showing traceability, test results, and compliance with all specifications. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, via the Wide Area Work Flow (WAWF) system.
- **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements.
- **Delivery:** The proposed delivery schedule is 365 days, with early and incremental deliveries accepted at no additional cost. Contractors are encouraged to quote actual delivery days.
**Contract Administration and Special Considerations**
- **Set-Aside:** This solicitation is a total small business set-aside, restricting competition to small businesses under NAICS 332722.
- **DPAS Rating:** Any contract awarded will be a "DO" rated order under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense.
- **Emergency Acquisition Flexibilities:** The order is issued under Emergency Acquisition Flexibilities (EAF), reflecting the criticality and urgency of the requirement.
- **Evaluation Criteria:** Past performance will be considered in accordance with FAR 13.106(a)(2) and DFARS 252.213-7000.
- **Drawings and Data:** Access to technical drawings may require a request via the solicitation page on SAM.gov, followed by email notification to the primary point of contact.
- **No Mercury:** Mercury and mercury-containing compounds are strictly prohibited in the supplied material.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), a federal office responsible for supply chain management and procurement for the U.S. Navy.
- **Primary Contact:** Lydia M. Shaloka, reachable at 215-697-4717 or [email protected].
- **Submission and Review:** All certification documentation must be submitted electronically via WAWF, with notification to [email protected]. No material is to be shipped prior to receipt of acceptance.
**Constant Elements Throughout Contract Lifecycle**
- The requirement for strict adherence to technical drawings, specifications, and quality assurance protocols.
- The necessity for comprehensive traceability and certification for all materials and processes.
- The obligation to maintain and make available quality system documentation and records for government review.
- The prohibition of mercury and the requirement for compliance with all applicable federal, military, and commercial standards.
- The use of WAWF for all certification and acceptance documentation.
- The DPAS rating and emergency acquisition status, reflecting the ongoing criticality of the item.
**Summary for Contractors**
This solicitation represents a highly controlled and technically demanding procurement for a critical shipboard retaining nut. Contractors must demonstrate robust quality management systems, experience with Level I/SUBSAFE or similar high-assurance naval components, and the ability to manage detailed traceability and certification processes. The opportunity is limited to small businesses with relevant manufacturing capabilities under NAICS 332722. Interested parties should carefully review all referenced specifications and standards, ensure their ability to comply with all quality and documentation requirements, and be prepared for government audits and source inspections. Early engagement with the contracting office is recommended for access to drawings and clarification of requirements.
For further details and to access the solicitation, visit the official SAM.gov opportunity page: https://sam.gov/opp/88b05eaf78204de982ea0c92a4ea4171/view.