NUT,SELF-LOCKING,HE

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFA64

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5310

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Naval Supply Systems Command (NAVSUP) Weapon Systems Support, Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QFA64) for the supply of self-locking heavy hex nuts, classified under Product Service Code 5310 and NAICS Code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing). This procurement is designated as a total small business set-aside, inviting qualified small business manufacturers and suppliers to participate. **Purpose and Scope** The primary objective of this procurement is to acquire self-locking heavy hex nuts (ring type, non-metallic insert, controlled root radius, nickel-copper alloy, Part Number M32258-UAC10) for use in critical shipboard systems. These components are designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) due to their essential role in maintaining the safety and operational integrity of naval vessels. The failure or malfunction of these nuts could result in catastrophic consequences, including personnel injury, loss of life, or loss of vital shipboard systems. **Key Requirements and Deliverables** Contractors must ensure that all supplied nuts conform to the requirements of MIL-DTL-32258, with specific material and design criteria: - Material: QQ-N-281, Class A or B, with chemical composition per MIL-DTL-32258. All nuts in a lot must be of the same class. - Self-locking element: For 250°F nuts, use ASTM-D6456 Type 1 or ASTM-D4066 Group 01, Class 1 or 2, Grade 1-6; for 450°F nuts, use ASTM-D6456 Type 1. - Internal threads must be formed by cutting; cold forming is not permitted. - Each shipment must include one additional fastener per uniquely identified heat/lot for traceability. - Complete traceability and certification are required for all materials, including quantitative chemical and mechanical analysis. - Certifications for dye penetrant inspection (non-magnetic grades), quality conformance tests, and nonmetallic insert attributes are mandatory. - First Article Testing (FAT) is required unless prior qualification can be demonstrated; documentation from previously qualified manufacturers or distributors is acceptable under certain conditions. **Quality Assurance and Control** A robust quality system is required, compliant with ISO-9001 (or MIL-I-45208 as an alternate), and calibration systems per ISO-10012 or ANSI-Z540.3 with ISO-17025 (or MIL-STD-45662). The contractor’s quality system and products are subject to government evaluation, verification, and audit throughout the contract lifecycle. Government Quality Assurance will be performed at the source, and any changes to the place of performance require prior authorization. Contractors must maintain detailed inspection and test records, ensure traceability from material to certification test reports, and provide permanent traceability markings on all fasteners per MIL-STD-792 and MIL-DTL-32258. All marking must remain legible after application of protective compounds and coatings. **Configuration Management and Change Control** Contractors are responsible for maintaining the total equipment baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. All waivers and deviations require review and approval by the Contracting Officer and must be classified as critical, major, or minor. **Packaging and Delivery** Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and contract-specific requirements. Delivery is required within 365 days, with early and incremental deliveries accepted at no additional cost. Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before acceptance is received. **Special Considerations** - The contract will be issued as a DO/DX rated order under the Defense Priorities and Allocations System (DPAS), certified for national defense use. - Emergency Acquisition Flexibilities (EAF) apply. - Level I Joint Source Certification is required. - Mercury and mercury-containing compounds are strictly prohibited. - Past performance will be considered in the evaluation of offers. **Contracting Entity and Contact Information** - Contracting Entity: NAVSUP Weapon Systems Support, Mechanicsburg (Federal Office) - Primary Contact: Lydia M. Shaloka, Telephone: 215-697-4717, Email: [email protected] - Notice URL: [SAM.gov Opportunity](https://sam.gov/opp/83765848956848a1a131276a85ee8ade/view) - Response Deadline: December 17, 2025, 20:12 **Summary for Contractors** This solicitation represents a highly specialized and controlled procurement for critical shipboard fasteners, with stringent requirements for material traceability, certification, and quality assurance. Contractors must demonstrate robust quality systems, experience with Level I/SUBSAFE material, and the ability to comply with complex documentation and inspection protocols. The opportunity is well-suited for small businesses with established capabilities in manufacturing and certifying high-reliability fasteners for defense applications. Interested parties should carefully review all referenced specifications and ensure readiness to meet the contract’s technical, quality, and delivery requirements.