FLANGE,PIPE
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010425QFF59
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4730
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation (Procurement Identifier: N0010425QFF59) for the manufacture and delivery of a specialized pipe flange, designated as "FLANGE, PIPE." This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4730, reflecting its focus on critical shipboard piping components. The solicitation is a total small business set-aside, inviting qualified small business manufacturers to participate.
**Purpose and Scope**
The flange to be procured is a 3-inch, 700 PSI component, intended for use in a crucial shipboard system. The application of this part is of significant importance, as the use of incorrect or defective material could result in catastrophic failure, including serious personnel injury, loss of life, or loss of vital shipboard systems. As such, the item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and certification procedures to ensure the highest level of quality and traceability.
**Key Requirements and Deliverables**
- **Technical Specifications:** The flange must be manufactured in accordance with Buships drawing 810-1385861, Type G, with specific modifications detailed in the solicitation. The spotface diameter is specified at 1 1/4 inches, with strict tolerances on depth and hub intersection.
- **Material:** The flange must be produced from MIL-C-24679, Alloy C71500, with full quantitative chemical and mechanical analysis required for certification.
- **Testing and Certification:** Certifications are required for dye penetrant inspection (per T9074-AS-GIB-010/271 and MIL-C-24679) and for any non-destructive tests on weld repairs or production welds. All O-ring grooves and mating sealing surfaces must be inspected per contractually invoked drawings or, where not specified, per the General Acceptance Criteria (GAC).
- **Welding and Brazing:** All welding, brazing, and allied processes must comply with NAVSEA standards (S9074-AR-GIB-010A/278, 0900-LP-001-7000, S9074-AQ-GIB-010/248). Procedures and qualification data must be submitted for approval prior to any such work.
- **Quality Assurance:** The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. Government Quality Assurance at source is required, and the contractor’s quality system is subject to evaluation and audit.
- **Traceability:** Full traceability from raw material to finished product is mandatory, with unique traceability markings on the material and corresponding certification test reports. Any process altering material properties requires re-identification and re-certification.
- **Documentation:** Certificates of Compliance, test certifications, and inspection records must be provided, referencing all applicable standards, specifications, and contract requirements. Electronic signatures are permitted under controlled procedures.
- **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements.
- **Delivery and Acceptance:** Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to each shipment. No material may be shipped before formal acceptance is received.
**Contract Administration and Special Considerations**
- **Set-Aside:** This solicitation is a total small business set-aside, in accordance with FAR and DFARS provisions.
- **DPAS Rating:** Any contract awarded will be a "DX" rated order under the Defense Priorities and Allocations System (DPAS), indicating national defense urgency.
- **Emergency Acquisition Flexibilities:** The order is issued under Emergency Acquisition Flexibilities (EAF).
- **Past Performance:** NAVSUP WSS will consider past performance in the evaluation of offers.
- **Drawings and Data Access:** Access to controlled drawings, if required, must be requested via the solicitation page on SAM.gov, with follow-up email to the primary point of contact.
- **Subcontractor Flowdown:** All requirements for traceability, certification, and quality assurance must be flowed down to all sub-tier suppliers and subcontractors.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS)
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Lydia M. Shaloka, Telephone: 215-697-4717, Email: [email protected]
- **Submission and Notification:** Certification documentation must be submitted via Wide Area Workflow (WAWF), with notifications to [email protected] and the primary contact.
**Constant Elements Over Contract Lifecycle**
Throughout the contract lifecycle, the following elements will remain constant:
- The requirement for strict adherence to technical specifications, material traceability, and quality assurance standards.
- The necessity for comprehensive documentation and certification for all materials and processes.
- The obligation to maintain and demonstrate a robust quality system, subject to government audit and inspection.
- The flowdown of all critical requirements to subcontractors and suppliers.
- The use of WAWF for submission of certification data and the prohibition of shipment prior to acceptance.
**Conclusion**
This solicitation represents a critical opportunity for small business manufacturers with expertise in high-specification pipe fittings for defense applications. The contract demands rigorous quality control, traceability, and compliance with Navy and DoD standards, reflecting the essential role of the flange in shipboard safety and operational integrity. Interested contractors should carefully review the technical, quality, and administrative requirements to ensure alignment with their capabilities and compliance infrastructure.
For full details and to access the solicitation, visit: [SAM.gov Opportunity](https://sam.gov/opp/212cf35b263e42abbcd4b7c4bdf8dbfc/view).