TAILPIECE,UNION
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFA08
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4730
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QFA08) for the manufacture and supply of a "Tailpiece, Union" component, specifically designed for use in a critical shipboard system. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4730, indicating its relevance to contractors specializing in metal valve and pipe fitting production for defense applications.
**Purpose and Scope**
The primary objective of this solicitation is to acquire a tailpiece for a 3-inch Trunion Ball Valve, manufactured in strict accordance with Naval Sea Systems Command Drawing 517-5486332, piece 7, with specific modifications and amplifications as detailed in the solicitation. The component is designated as "SPECIAL EMPHASIS material" (Level I, Scope of Certification, or Quality Assured), reflecting its criticality to shipboard safety and operational integrity. The use of incorrect or defective material could result in catastrophic failure, serious injury, or loss of vital ship systems, underscoring the stringent quality and certification requirements.
**Key Requirements and Deliverables**
- **Technical Specifications:** The tailpiece must conform to NAVSEA drawing 5486332, with explicit instructions regarding bolt circle holes and optional stress relief procedures. Material must be ASTM-B369, UNS C96400, with full quantitative chemical and mechanical analysis required.
- **Testing and Certification:** Certifications are mandatory for non-destructive tests (NDT) on weld repairs and production welds, weldability tests of ASTM-B369 material, and hydrostatic testing of each tailpiece to 1275 PSI for a minimum of five minutes, with acceptance criteria of no leakage or permanent deformation.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001, ISO-10012, ANSI-Z540.3, and ISO-17025, or MIL-I-45208 and MIL-STD-45662 for calibration. Government Quality Assurance at source is required, and the contractor’s quality system is subject to audit and review throughout the contract lifecycle.
- **Traceability and Certification:** Full traceability from material to certification test reports is required, with unique traceability markings on each item. Certificates of compliance must be submitted, showing traceability to the marking applied on each item and including detailed information as specified in the solicitation.
- **Welding and Brazing:** All welding, brazing, and allied processes must comply with NAVSEA standards (S9074-AR-GIB-010A/278, S9074-AQ-GIB-010/248, 0900-LP-001-7000), with procedures and qualification data submitted for approval prior to commencement.
- **Packaging:** Preservation, packaging, packing, and marking must adhere to MIL-STD 2073 and contract-specific requirements.
- **Government Furnished Material/Equipment:** If applicable, contractors must implement documented control procedures for handling, inspection, and reporting of government-furnished material or equipment.
- **Configuration Control:** Contractors are responsible for maintaining equipment baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters.
**Contract Administration and Submission Details**
- **Contracting Entity:** NAVSUP Weapon Systems Support Mechanicsburg (Office Key: 500021097), Department of Defense, Department of the Navy.
- **Location:** Mechanicsburg, PA; with material delivery and certification review at Portsmouth Naval Shipyard (DODAAC: N50286).
- **Contact Information:** Primary contact is Lydia M. Shaloka, reachable at 215-697-4717 or [email protected].
- **Submission and Review:** Certification data must be submitted via Wide Area Work Flow (WAWF) for review and acceptance prior to shipment. No material is to be shipped before receipt of acceptance. Notifications should be sent to [email protected].
- **Delivery Schedule:** Certification Data CDRLs are due 20 days prior to scheduled delivery; review/acceptance within 6 working days; final material delivery within 365 days of contract effective date.
- **Set-Aside and Special Considerations:** This is a total small business set-aside, providing opportunities for qualified small businesses. The order is "DO" rated under the Defense Priorities and Allocations System (DPAS), indicating national defense urgency and emergency acquisition flexibilities.
- **Evaluation Criteria:** Past performance will be considered in accordance with FAR 13.106(a)(2) and DFARS 252.213-7000.
**Constant Elements Throughout Contract Lifecycle**
- The requirement for strict adherence to technical specifications, quality assurance, traceability, and certification will remain unchanged.
- The need for government source inspection, configuration control, and compliance with all invoked standards and procedures is constant.
- The contract’s critical safety designation and associated controls will persist throughout the lifecycle.
- All documentation, certification, and communication protocols (WAWF, ECDS, email notifications) will be maintained as specified.
**Summary for Contractors**
This solicitation represents a highly specialized and critical procurement for the U.S. Navy, demanding rigorous quality assurance, traceability, and compliance with detailed technical and certification requirements. Contractors with proven capabilities in precision metal valve and pipe fitting manufacturing, robust quality systems, and experience with defense-grade certification and traceability protocols are encouraged to review the full solicitation and consider submitting a response. The opportunity is reserved for small businesses and carries national defense priority, with a clear emphasis on safety, reliability, and compliance.
For further details, access the solicitation at [SAM.gov](https://sam.gov/opp/a84427f73aad4b05b8191cf7786ae26c/view) or contact Lydia M. Shaloka at [email protected].
Response deadline: February 23, 2026, 20:02 EST.