120-155mm Cannon Laser Bore/ Chamber Add-on Kit

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

W6QM MICC-FT DRUM

Contract Value

Not provided

Codes & Classification
Solicitation Number

W911S225U0516

NAICS

334519 - Other Measuring and Controlling Device Manufacturing

Classification Code

6650

Additional Details
Set Aside

SBA

Place of Performance

-

SourceSAM
The U.S. Army, through the Mission and Installation Contracting Command at Fort Drum (W6QM MICC-FT DRUM), has issued a combined synopsis/solicitation for the procurement of a 120-155mm Cannon Laser Bore/Chamber Add-on Kit. This opportunity, identified by procurement number W911S225U0516, is currently active and is set aside for Small Business Administration (SBA) eligible vendors under NAICS code 334519, which covers Other Measuring and Controlling Device Manufacturing. The primary objective of this acquisition is to equip the Army with advanced, precision non-contact bore measurement capabilities for both 120mm and 155mm cannon gun tubes, encompassing both smooth and rifled variants. The intended outcome is to enable highly accurate, repeatable, and efficient measurement of cannon tube bores and chambers, extending from the chamber through to the muzzle end. This will be achieved through the use of a guide tube adaptor that attaches to the muzzle, supporting a non-contact gauge and a rigid or self-propelled delivery unit. The scope of work requires the provision of two distinct, turn-key laser bore gauging kits—one for 120mm cannons and one for 155mm cannons. Each kit must include the following major components: - Bore Chamber Add-on Kit (specific to 120mm or 155mm) - Guide Tube Assembly - Certified Calibration Ring (with a minimum of five steps/diameters) - Laser Bore Chamber Calibration Workspace - Calibration and Analysis Software The technical specifications for the laser bore chamber scanning modules are stringent, reflecting the Army’s need for high-resolution, reliable measurement tools. Key requirements include: - Axial scan resolution of at least 0.25mm (0.01 inch) - Rotary scan resolution of at least 0.1mm (0.004 inch) - Sensor resolution of at least 0.005mm (0.00025 inch) - Laser spot size of at least 0.050mm (0.002 inch) - Measurement repeatability of 0.012mm (0.0005 inch) - Measurement accuracy of at least 0.025mm (0.001 inch) in the bore and 0.05mm (0.002 inch) in the bore chamber - Angular sampling resolution variable up to 0.1 degrees per sample (3,600 samples per revolution) - Measuring range for 120mm: 4.7000 in to 6.3000 in; for 155mm: 6.1950 in to 6.8000 in Calibration rings must feature five steps within the central 75% of the gauge’s range and be measured to NIST-traceable standards, with accreditation to A2LA, ISO 17025, and ANSI/NCL Z540-1-1994. The calibration software must support automatic sensor calibration routines, provide pass/fail displays, and allow for both automatic and manual adjustment of calibration parameters. Data analysis is to be supported by existing software, with modifications as necessary to meet the specified requirements. Analysis modules should enable post-processing functions such as calculation of land and groove diameter, area, statistical analysis, reference subtraction, data rotation, centering offset removal, undefined/bad data removal, and application of variable median and averaging filters. This procurement is classified under Product Service Code 6650 (Optical Instruments, Test Equipment, Components, and Accessories). The contracting office is a federal entity, and all communications regarding this opportunity should be directed to the designated contacts: David Le ([email protected], 928-328-7686) and Joy Davis ([email protected], 315-772-9900). Interested contractors should note the SBA set-aside requirement and ensure their eligibility. The solicitation was posted on April 14, 2025, with responses due by April 21, 2025. Further details and updates can be accessed via the official SAM.gov listing at https://sam.gov/opp/35f7e0a907c145a8ba3b6fc7a1863b95/view. This opportunity is well-suited for firms with expertise in precision measurement instrumentation, laser scanning technology, and calibration software development, particularly those with experience in defense or heavy industrial applications. The requirements and deliverables outlined are expected to remain consistent throughout the contract lifecycle, emphasizing the need for robust, reliable, and accredited solutions.