NUT,PLAIN,BARREL

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010425QFC48

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5310

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The U.S. Navy, through NAVSUP Weapon Systems Support (WSS) Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010425QFC48) for the supply of barrel nuts, classified under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5310. This procurement is a total small business set-aside, inviting qualified small business manufacturers to participate. **Purpose and Scope** The barrel nuts to be procured are designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) for use in critical shipboard systems. The failure or defect of these components could result in catastrophic consequences, including serious personnel injury, loss of life, or loss of vital shipboard systems. As such, the Navy has imposed stringent quality assurance, traceability, and certification requirements to ensure the integrity and reliability of the supplied material. **Key Requirements and Objectives** - **Technical Specifications:** Barrel nuts must be manufactured in accordance with Naval Sea Systems Command drawings 803-5959302 (item 17) and 803-5959311, with specific material requirements (QQ-N-286, form 2, annealed and age hardened, mechanical properties per drawing note S4B). No weld repair is permitted on QQ-N-286 material. - **Testing and Certification:** Quantitative chemical and mechanical analysis is required, with certifications for annealing, age hardening, and ultrasonic inspection of starting material (for items with diameter or minimum distance between parallel surfaces of 4 inches or greater, or as otherwise specified). Slow strain rate tensile tests must be performed by approved laboratories listed in the solicitation. - **Thread Requirements:** All internal threads must be cut (not cold formed), and thread inspection must comply with FED-STD-H28 series or ASME B1 series as a commercial equivalent. System 21 of FED-STD-H28/20 is the minimum inspection requirement unless otherwise specified. - **Traceability and Compliance:** Full traceability from material to certification test report is mandatory. Certification data must be uniquely marked on the material and referenced in all documentation. Certificates of compliance must show traceability to the marking on each item and include detailed information as outlined in the solicitation. - **Quality Assurance:** Contractors must maintain a quality system in accordance with ISO-9001 (or MIL-I-45208 as an alternative), with calibration system requirements per ISO-10012 or ANSI-Z540.3 with ISO-17025. The quality system and products are subject to government evaluation, verification, and audit throughout the contract lifecycle. - **Inspection and Acceptance:** Government Quality Assurance will be performed at the source. No material may be shipped prior to receipt of acceptance. Final inspection includes 100% verification of material properties, traceability, and certification completeness. - **Configuration Control:** Contractors must maintain the equipment baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. - **Material Handling and Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and contract schedule requirements. Mercury and mercury-containing compounds are strictly prohibited. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH) - **Location:** Mechanicsburg, PA - **Primary Contact:** Christian M. Valdez, Telephone: 717-605-3229, Email: [email protected] - **Alternate Contact:** Christina J. Newcomb, Telephone: 717-605-2227, Email: [email protected] - **Submission and Certification:** Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to each shipment, via Wide Area Work Flow (WAWF). No shipment is authorized before acceptance. **Procurement Type and Special Considerations** - **Type:** Solicitation for fixed-price supply contract - **Set-Aside:** Total small business set-aside - **Priority Rating:** "DO" rated order, certified for national defense use under the Defense Priorities and Allocations System (DPAS) - **Emergency Acquisition Flexibilities:** This order is issued under Emergency Acquisition Flexibilities (EAF) - **Past Performance:** NAVSUP WSS will consider past performance in the evaluation of offers **Constant Elements Over Contract Lifecycle** Throughout the contract, the requirements for material traceability, certification, quality assurance, configuration control, and compliance with technical specifications will remain unchanged. The contractor’s quality system, inspection procedures, and documentation must be maintained and available for government review at all times. Any changes to the place of performance, quality system, or configuration must be approved by the contracting officer. **Summary for Contractors** This opportunity is suited for small business manufacturers with robust quality assurance systems, experience in producing critical safety items for naval applications, and the capability to meet rigorous traceability and certification requirements. Contractors must be prepared for comprehensive government oversight, strict adherence to technical specifications, and detailed documentation throughout the contract lifecycle. The solicitation is inactive as of the notice status, but interested parties should review the requirements and ensure alignment with their capabilities before responding. For further details and to access the solicitation, visit the official SAM.gov opportunity page: [https://sam.gov/opp/74988ec9043d4138b58d2afb277b867c/view](https://sam.gov/opp/74988ec9043d4138b58d2afb277b867c/view).