SANDING BOOTH SYSTEM

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

W6QM MICC-FT DRUM

Contract Value

Not provided

Codes & Classification
Solicitation Number

W911S225U1611

NAICS

333413 - Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

Classification Code

3426

Additional Details
Set Aside

SBA

Place of Performance

-

SourceSAM
The U.S. Army, through the Mission and Installation Contracting Command at Fort Drum (W6QM MICC-FT DRUM), has issued a combined synopsis/solicitation for the procurement of a Sanding Booth System. This opportunity, identified under procurement number W911S225U1611, is designated as a Total Small Business Set-Aside, inviting participation exclusively from qualified small business concerns. The primary objective of this procurement is to acquire a fully compliant sanding booth system designed to enhance workplace safety and operational efficiency in environments where dust and particulate control are critical. The booth must adhere to stringent industry standards, specifically NFPA 33 and OSHA CFR-29.1910.107, ensuring compliance with fire, safety, and occupational health regulations. The scope of work encompasses the design, fabrication, and delivery of a sanding booth with the following key features and requirements: - **Filtration System:** The booth must incorporate a two-stage filtration system to effectively capture sanding dust. The first stage utilizes blanket-style poly roll media with a Filterloc management system and a locking frame to prevent gaps or leaks. The second stage consists of pocket/bag filters. An onboard manometer is required to display air resistance across the filter system, facilitating maintenance and operational monitoring. - **Monorail Accommodation:** The booth must be engineered to accommodate a monorail running down the center of the working area, with a 5-inch overhead gap separating the front and back sections. Entrance and exit points are to be notched, providing an overall opening of 25 inches wide by 106 inches tall. - **Dimensions and Construction:** The interior working dimensions are specified as 7 feet wide by 9 feet 6 inches high by 36 inches deep, while the overall exterior dimensions, including filtration and exhaust plenum, are 7 feet 4 inches wide by 10 feet 2 inches high by 12 feet 2 inches deep. Construction materials must include 18-gauge reinforced steel panels, pre-punched on 6-inch centers for nut and bolt assembly, and equipped with galvanized companion flanges for enhanced rust resistance. - **Lighting:** The booth must be equipped with two high-efficiency, sealed, and gasketed LED light fixtures, each providing 4,000 lumens to ensure adequate illumination within the workspace. - **Exhaust System:** The exhaust fan must be a 36-inch diameter tube-axial duct fan with spark-resistant blades, rated at 15,525 CFM at 1.25 inches static pressure, and powered by a 10 HP motor. The system must be belt-driven, featuring motor and fan pulleys, v-belts, a motor base, lubricated sealed bearings, and thermal resets for safety. - **Exhaust Stack:** The exhaust stack must include a fan connector ring, an inspection plate above the fan, a 90-degree elbow, a section for horizontal flow, and an exterior wall-mount louvered damper assembly. The procurement is classified under NAICS code 333413 (Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing), with Product Service Code 3426. The contracting activity is a federal office, and all communications regarding this opportunity should be directed to the primary point of contact, David Fortune, at [email protected] or 918-420-6445. Interested small business contractors should note that the solicitation is active, with a response deadline of August 22, 2025, at 20:08. The full notice and any updates can be accessed via the official SAM.gov listing at https://sam.gov/opp/e46fa33aa1f648589395a42dea88fe76/view. This opportunity is well-suited for small businesses with demonstrated expertise in the design and manufacture of industrial air purification and dust control systems, particularly those with experience in custom booth fabrication and compliance with federal safety standards. Contractors should ensure their solutions meet all specified technical requirements and are prepared to provide documentation of compliance with applicable standards throughout the contract lifecycle.