PARTS KIT,BALL VALV

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFA06

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Naval Supply Systems Command (NAVSUP) Weapon Systems Support, Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QFA06) for the supply of a Parts Kit for a 1-1/2 inch Ball Valve, classified under Product Service Code 4820 (Valves, Nonpowered) and NAICS Code 332919 (Other Metal Valve and Pipe Fitting Manufacturing). This procurement is a Total Small Business Set-Aside, inviting qualified small business contractors to submit offers for this critical requirement. **Purpose and Scope** The primary objective of this procurement is to acquire a Parts Kit for a 1-1/2 inch Ball Valve, intended for use in a crucial shipboard system. The components supplied under this contract are designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), reflecting their criticality to ship safety and operational integrity. The failure or malfunction of these parts could result in severe personnel injury, loss of life, or catastrophic damage to shipboard systems or the vessel itself. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the highest standards of material integrity and performance. **Key Requirements and Deliverables** The required Parts Kit consists of: - One Ball (piece 80LI) manufactured in accordance with NAVSEA Drawing 7285198. - Two matching Seats (piece 9) manufactured in accordance with NAVSEA Drawing 7286278. **Material Specifications:** - The Ball must be fabricated from SAE-AMS-6931 or centrifugally cast 6AL-4V, ASTM-B367, Grade C-5, with mechanical properties as specified in the applicable drawing or standard. - The Seats must be made from Delrin (Dupont AF DE588, Teflon Filled Acetal) and must meet detailed physical and mechanical property requirements, including specific gravity, melting point, tensile strength, impact resistance, compressive stress, water absorption, hardness, Teflon fiber content, and dimensional stability. **Testing and Certification:** - Quantitative chemical and mechanical analysis is required for all parts, with full traceability to certification test reports. - Non-destructive testing (NDT) and hydrostatic or dye penetrant inspection are required for the Ball, with strict acceptance criteria. - Visual and dimensional inspections, as well as stack height measurements, are required for the Seats. - All certifications must be submitted and accepted by Portsmouth Naval Shipyard (DODAAC N50286) prior to shipment, via the Wide Area Work Flow (WAWF) system. **Quality Assurance and Traceability:** - The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. - Full traceability from raw material to finished product is mandatory, with permanent or tag-based marking as specified. - Certificates of Compliance must be provided, affirming conformance to all contract requirements and traceability to material markings. - The contract requires government source inspection and acceptance at destination (FOB Destination), with no material to be shipped prior to receipt of acceptance. **Configuration Control and Change Management:** - The contractor is responsible for maintaining baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface. - All waivers and deviations require prior approval from the Contracting Officer and must be fully documented. **Packaging and Delivery:** - Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific instructions. - The final delivery of material is required within 365 days after the effective date of the contract, with interim submission and review of certification data as specified. **Contracting Entity and Contact Information** - **Contracting Agency:** NAVSUP Weapon Systems Support, Mechanicsburg (Federal Office) - **Primary Contact:** Lydia M. Shaloka, Telephone: 215-697-4717, Email: [email protected] - **Submission Portal:** https://sam.gov/opp/90aa4d8947e84bbc8a191a94301828c3/view **Procurement Type and Special Considerations** - **Type:** Solicitation (Active) - **Set-Aside:** Total Small Business Set-Aside - **DPAS Rating:** "DO" rated order, certified for national defense use under the Defense Priorities and Allocations System (DPAS). - **Evaluation:** Past performance will be considered in accordance with FAR 13.106(a)(2) and DFARS 252.213-7000. - **Emergency Acquisition Flexibilities (EAF):** This order is issued under EAF provisions. **Constant Elements Over Contract Lifecycle** - The requirement for strict material traceability, quality assurance, and compliance with all specified standards and drawings will remain in force throughout the contract. - All deliverables must be accompanied by complete and accurate certification and test documentation. - The contract prohibits the use of mercury or mercury-containing compounds. - All changes to quality systems, configuration, or materials require prior government approval. - The contract mandates government source inspection and acceptance, with no shipment permitted prior to formal acceptance. **Summary for Contractors** This opportunity is well-suited for small businesses with demonstrated expertise in precision manufacturing of critical shipboard valve components, robust quality assurance systems, and the ability to meet rigorous traceability and certification requirements. Contractors must be prepared to manage complex documentation, maintain configuration control, and comply with all government inspection and acceptance protocols. The contract’s critical safety designation and DPAS rating underscore the importance of reliability, compliance, and timely delivery. Interested parties should review the full solicitation and referenced documents for detailed technical and quality requirements, and direct any questions to the primary point of contact listed above.