BALL JOINT

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010425QFF48

NAICS

333613 - Mechanical Power Transmission Equipment Manufacturing

Classification Code

3040

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
Documents1
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010425QFF48) for the manufacture and delivery of a Ball Joint assembly, classified under NAICS code 333613 (Mechanical Power Transmission Equipment Manufacturing) and Product Service Code 3040. This procurement is critical to the operational integrity of shipboard systems, with the Ball Joint designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured). The intended outcome is to ensure the supply of a highly reliable, fully certified Ball Joint assembly for use in vital naval applications, where failure could result in severe personnel injury, loss of life, or catastrophic system failure. **Scope and Purpose** The Ball Joint to be procured must be manufactured in strict accordance with NAVSEA drawing 596-7409397 Assembly A, including all referenced engineering reports and specifications, except as specifically modified in the solicitation. The assembly and its components are subject to rigorous material, process, and quality control requirements, reflecting their application in critical shipboard systems. The contract invokes special control procedures to guarantee the receipt of correct, defect-free material, and mandates traceability and certification throughout the manufacturing process. **Key Requirements and Deliverables** - **Material and Certification:** All major components (Lower Body, Retainer, Ball, Flange, Stud, and Self-Locking Nut) must be fabricated from specified materials (e.g., QQ-N-281, MIL-DTL-1222, QQ-N-286) with full quantitative chemical and mechanical analysis. Certifications for all materials and processes are mandatory, and traceability must be maintained from raw material to finished product. - **Testing and Inspection:** The Ball Joint assembly and its components are subject to a comprehensive suite of tests, including visual and dye penetrant inspection, hydrostatic testing, ultrasonic inspection, and radiography. Certifications for these tests must be provided, and all test procedures must reference the applicable standards and acceptance criteria. - **Quality Assurance:** The contractor must maintain a quality system compliant with ISO 9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO 10012 or ANSI-Z540.3/ISO-17025. Government Quality Assurance at source is required, and the contractor’s quality system and procedures are subject to government review and approval. - **Configuration and Change Control:** The contractor is responsible for maintaining the baseline configuration of the equipment and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface. All waivers and deviations require prior government approval. - **Welding and Brazing:** All welding and brazing must comply with NAVSEA and MIL standards, with procedures and qualification data submitted for approval prior to production. Repair welding on certain materials (e.g., QQ-N-286) is prohibited. - **Marking and Traceability:** All components, especially fasteners, must be permanently marked for traceability in accordance with MIL-STD-792 and other applicable standards. Markings must remain legible after any coating or finishing processes. - **Documentation and Data Deliverables:** The contractor must submit a range of Contract Data Requirements List (CDRL) items, including inspection and test plans, material certifications, welding procedures, and certificates of compliance. All documentation must be complete, legible, and positively certified. - **Mercury-Free Requirement:** No mercury or mercury-containing compounds may be used or come into contact with the supplied hardware. - **Government Furnished Material/Equipment (if applicable):** The contractor must implement documented control procedures for any government-furnished material or equipment. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH) - **Department/Agency:** Department of Defense, Department of the Navy - **Primary Contact:** Benjamin T. Spangler, Telephone: 771-229-0573, Email: [email protected] **Procurement Type and Special Considerations** This is a solicitation for a fixed-price supply contract. The requirement was initially set aside for small business, but the set-aside has since been dissolved, opening the competition to all qualified sources. The order is designated as a "DX" rated order under the Defense Priorities and Allocations System (DPAS), indicating its priority for national defense. Emergency Acquisition Flexibilities (EAF) are invoked, and access to classified drawings (CONFIDENTIAL level) is required for contract performance, though not for quote submission. Facility clearance may be required upon award. **Location and Delivery** The place of performance and delivery is FOB Destination, with the Portsmouth Naval Shipyard’s DODAAC updated to N50286. Final delivery of material is required within 365 days after the effective date of the contract, with interim data submissions and approvals scheduled throughout the contract period. **Evaluation Criteria** NAVSUP WSS will consider past performance in the evaluation of offers, in accordance with FAR and DFARS provisions. Access to drawings and technical data may require request and approval through the government’s SAM.gov portal. **Summary for Contractors** This procurement represents a highly controlled, technically demanding opportunity for manufacturers with experience in precision mechanical assemblies for defense applications. Contractors must demonstrate robust quality assurance systems, the ability to manage traceability and certification for all materials and processes, and the capacity to comply with stringent Navy and DoD standards. The requirement for access to classified information and the "DX" priority rating underscore the criticality of this effort to national defense. Interested parties should carefully review all referenced specifications, drawings, and CDRL requirements to ensure full compliance and eligibility. For further details and to access solicitation documents, contractors should refer to the official notice at [SAM.gov Opportunity ID 350746218e184705b53adb50ca66c4b6](https://sam.gov/opp/350746218e184705b53adb50ca66c4b6/view).