M--TRAIL BRIDGE YOCKANOOKANY SECTION
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
SER WEST(52000)
Contract Value
Not provided
Codes & Classification
Solicitation Number
140P5225R0019
NAICS
237310 - Highway, Street, and Bridge Construction
Classification Code
M1LB
Additional Details
The National Park Service, through its SER WEST (52000) office, has issued a combined synopsis/solicitation for the construction of a trail bridge along the Yockanookany section. This procurement, identified by number 140P5225R0019, is classified under NAICS code 237310, which pertains to Highway, Street, and Bridge Construction, and is set aside for Small Business Administration (SBA) eligible contractors.
The primary objective of this project is the fabrication and installation of a pre-fabricated trail bridge, with a focus on ensuring structural integrity, durability, and long-term corrosion resistance. The scope of work includes the delegated design of minor details specifically for the pre-fabricated bridge elements, which are to be manufactured by an approved supplier. All other design aspects are to remain as specified in the provided plans, with minimal deviation permitted.
Key technical requirements and deliverables include:
- The option for diaphragms to be bolted rather than welded to the girders, as approved.
- Diaphragm connection brackets must be installed on both sides of the diaphragm, as well as at each end.
- Bearing plates are required to be welded to the girders.
- All steel components—including hardware, girders, bearing plates, diaphragms, and nailer angles—must be coated to minimize corrosion. Acceptable coatings include galvanization (zinc), epoxy, or powder coating.
- Steel angle nailer brackets are to be included, with nailers spaced at a maximum of 5 feet on center along the bridge length, though closer spacing is permitted for even distribution.
While minor design details for the pre-fabricated bridge may be delegated to the contractor, the solicitation emphasizes that deviations from the established design should be avoided unless specifically allowed. Contractors should be prepared to adhere closely to the provided plans and specifications.
The solicitation remains active, with bids due by July 17, 2025, at 2:00 PM Central Time. All terms, conditions, and timelines are unchanged following Amendment 0002, which addressed several technical questions from prospective bidders.
Interested parties may access the full solicitation and associated attachments via the SAM.gov opportunity portal (Opportunity ID: 66bc1102068a4743af5a7117a3be8cf6). For further information or clarification, the primary point of contact is Tara Clark, who can be reached at [email protected] or by phone at 662-372-0363.
This opportunity is best suited for contractors with proven experience in bridge construction, particularly those familiar with pre-fabricated structures and corrosion-resistant steel treatments. The project’s requirements and oversight will remain consistent throughout the contract lifecycle, ensuring a stable framework for execution and compliance.
Documents6