SCREW,CAP,HEX HD
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010425QZD82
NAICS
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Classification Code
5305
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (Procurement Identifier: N0010425QZD82) for the supply of a specialized hex head cap screw, designated as a Critical Safety Item (CSI) for use in crucial shipboard systems. This procurement is classified under NAICS Code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5305, reflecting its focus on high-integrity fastener components.
**Purpose and Scope**
The primary objective of this solicitation is to acquire hex head cap screws manufactured in strict accordance with NAVSEA Drawing 7055651, Item 003 (or 501-7627451 Item 003), for installation in shipboard systems where failure could result in catastrophic consequences, including serious injury, loss of life, or loss of vital shipboard functions. As such, these screws are designated as SPECIAL EMPHASIS material, requiring rigorous control procedures and quality assurance to ensure the delivery of correct and defect-free items.
**Key Requirements and Deliverables**
- **Material and Manufacturing:** The screws must be fabricated from K-MONEL, heat treated per QQ-N-286, and subjected to solution annealing and age hardening after all heading and thread rolling operations. Mechanical properties must be verified per MIL-DTL-1222, including tensile, yield, elongation, and hardness tests.
- **Testing:** Slow strain rate tensile tests must be performed by one of several specified laboratories. Wedge tensile tests are required for each production lot, with detailed requirements based on fastener type and size. All testing and certification must be positive and unqualified.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012, ANSI-Z540.3, and ISO-17025. Government source inspection at the contractor’s facility is mandatory, and the contractor’s quality system is subject to audit and review throughout the contract lifecycle.
- **Traceability and Certification:** Permanent traceability markings must be applied to each item, and a comprehensive certificate of compliance is required, demonstrating full adherence to all specifications, drawings, and invoked standards. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, via Wide Area Work Flow (WAWF).
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and contract schedule requirements.
- **Configuration Control:** The contractor is responsible for maintaining baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. All waivers and deviations require prior approval from the Contracting Officer.
**Contracting Entity and Contact Information**
- **Entity:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), a federal office under the Department of Defense, Department of the Navy.
- **Primary Contact:** Ashton K. Perry, Telephone: 717-605-7574, Email: [email protected]
- **Location:** Mechanicsburg, PA
**Procurement Type and Special Considerations**
- **Solicitation Type:** This is a fixed-price solicitation.
- **Set-Aside:** The procurement is a total small business set-aside, providing an opportunity for qualified small businesses to participate.
- **Priority Rating:** The contract will be DO certified under the Defense Priorities and Allocations System (DPAS), indicating its importance for national defense, emergency preparedness, and energy program use.
- **Emergency Acquisition Flexibilities:** The requirement falls under Emergency Acquisition Flexibilities (EAF) per 41 U.S.C. 1903, streamlining certain acquisition processes due to its critical nature.
**Additional Notes**
- Drawings associated with this solicitation are available on SAM.gov with restricted access; vendors must request access and notify the POC.
- All contractual documents are considered issued upon electronic transmission or mailing, and acceptance of the contractor’s proposal constitutes bilateral agreement.
- The proposed delivery schedule includes submission of certification data 20 days prior to delivery, review/acceptance within 18 working days, and final material delivery within 186 days.
- The contract includes a one-year warranty from the date of delivery for supplies of a noncomplex nature.
**Constant Elements Throughout the Contract Lifecycle**
- Adherence to specified technical standards and drawings
- Maintenance of rigorous quality assurance and traceability protocols
- Government source inspection and configuration control
- Compliance with all certification, packaging, and documentation requirements
- Engagement with specified points of contact and submission procedures
**Summary for Contractors**
This opportunity is suited for small businesses with proven capabilities in manufacturing high-integrity fasteners for defense applications, robust quality management systems, and experience with government source inspection and certification protocols. The contract’s critical safety designation, stringent testing and traceability requirements, and configuration control obligations underscore the need for meticulous process management and compliance. Interested contractors should review the full solicitation and associated technical documentation, ensure access to restricted drawings, and be prepared to meet all outlined requirements and deliverables.
For further details and to access the solicitation, visit the official notice at [SAM.gov](https://sam.gov/opp/85c1b644a56e43239f3caf39bf5f61b3/view).
Response deadline: February 12, 2026, 20:02.