WELDER
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
W6QM MICC-FT DRUM
Contract Value
Not provided
Codes & Classification
Solicitation Number
W911S225U1754
NAICS
333992 - Welding and Soldering Equipment Manufacturing
Classification Code
3431
Additional Details
The Mission and Installation Contracting Command at Fort Drum (W6QM MICC-FT DRUM) has issued a combined synopsis/solicitation for the procurement of a portable welder, as detailed under solicitation number W911S225U1754. This opportunity is classified under NAICS code 333992, which pertains to Welding and Soldering Equipment Manufacturing, and is set aside for Small Business Administration (SBA) eligible vendors.
The primary objective of this procurement is to acquire a high-performance, 400-amp portable welder suitable for mounting on a flatbed truck. The welder must be powered by a diesel engine and meet a comprehensive set of technical specifications to ensure robust, reliable operation in demanding field environments. Key requirements include an amperage range of 20 to 400 amps, compatibility with welding stainless steel and steel, and the ability to handle a rated carbon diameter of 3/16 inches (4.8 mm). The unit must operate on direct current (DC) with a minimum open circuit voltage of 85 VDC.
To support operational flexibility and ease of transport, the welder must feature a standard lift eye for portability. Cold weather starting aids, such as an engine block heater and glow plugs, are required to ensure reliable performance in low-temperature conditions. The engine must be a Kubota brand, compliant with Tier 4 Final (T4F) emissions standards, and deliver a minimum of 20.2 horsepower. The engine should idle at 1500 RPM and reach weld speed at 1800 RPM. The fuel tank must have a minimum capacity of 11.5 gallons, and the unit must run on diesel fuel.
Performance specifications include a constant current/constant voltage (CC/CV) weld output, with a minimum rated output of 400 amps at 24 volts and 350 amps at 27 volts, both at a 100% duty cycle. The welder must also provide single-phase auxiliary continuous power of at least 10,000 watts and peak power of 12,000 watts. Sound levels are restricted to a maximum of 66 dB at idle and 71.6 dB during welding operations, ensuring compliance with noise control requirements.
Dimensional constraints specify a maximum width of 28 inches, height of 32 inches, length of 60 inches, and a net weight not exceeding 1,000 pounds. A minimum three-year warranty is required to guarantee product reliability and support.
The procurement is being managed by David Fortune, who serves as the primary point of contact and can be reached at [email protected] or by phone at 918-420-6445. Interested vendors should note that the solicitation is active, with responses due by September 8, 2025, at 16:09. Further details and updates can be accessed via the official SAM.gov opportunity posting at https://sam.gov/opp/5b97379587b54fed9435aefaf283ffe2/view.
This opportunity is well-suited for small businesses specializing in the manufacturing or supply of advanced welding equipment, particularly those with experience meeting stringent military specifications and supporting field operations. Contractors should ensure their proposed solutions fully address the outlined technical and performance requirements, as these elements will remain central throughout the contract lifecycle.